How to change the field lenght in stanard structure.

hai Gurus,
When I enhanced the standard structure for the 1st time I got warning but I could able to replicate and pull the data from r3 to bw. When I tried to enhance it again it is not allowing me saying i the need to enhance the standard data field length or need to add a custom field for this. Can you tell me how can change the field length for a standard structure?.
Thanks, VP.

hi,
u can add a custom field of the required length to your structure and write the exit to populate it. If its a standard field I dont think you will be able to alter the length of the field.
Regards.

Similar Messages

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name           TYPE rs38l_fnam,
       fp_docparams      TYPE sfpdocparams,
       fp_outputparams   TYPE sfpoutputparams,
       it_kna1           TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN'                   "& Form Processing: Call Form
   CHANGING
     ie_outputparams = fp_outputparams
   EXCEPTIONS
     cancel          = 1
     usage_error     = 2
     system_error    = 3
     internal_error = 4
     OTHERS          = 5.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'           "& Form Processing Generation
   EXPORTING
     i_name     = 'ZAF_FS_1'
   IMPORTING
     e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu   = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
   EXPORTING
     /1bcdwb/docparams        = fp_docparams
      it_data                   = it_kna1
*    IMPORTING
*     /1BCDWB/FORMOUTPUT       =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error           = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error        = 3
     OTHERS               = 4.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
6) Output -
BR.

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

How to Change the Fields from Input mode to display mode

Hi experts,
Here is my business requirement. I need to show certain fields in the PRICING TAB OF SALES ORDER in display mode. Now for this i am using the BADI definition CRM_PRICING_BADI.
   Now, can anybody tell me how to change the field type from input mode to change mode?

Hi Karan,
In your BADI has a parameter CT_INPUT_FIELD_NAMES with one field called CHANGEABLE with values:
     Field Can Be Changed
A     Field Cannot Be Changed
   Assing this values to your fields according with your requirements.
Regards.
Manuel

How to change the fields order by pushing the TAB button?

Hello.
I have 4 input fields on a screen that i have build.
When i'm running the screen, I can move from one field to
another by the TAB button.
I need to set a different moving order that is performed by the TAB button.
For example: the fields are 1,2,3,4. if I use the TAB button to move from one field to another- the order is 1->2->3->4.
I want it to be 1->3->2->4.
Is it possible??
Thanks, Barak.

Hi Barak Sahar,
a) set the initial cursor at dynpro level
b) set the cursor positions dynamically using codeSET CURSOR[/code]
Here are the online help links I found:
http://help.sap.com/saphelp_470/helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_470/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/frameset.htm
Go through below thread...
How to change the sequence of fields accessed with the tab key on a dynpro;&#56907;
Hope it will solve your problem
<REMOVED BY MODERATOR>
Thanks & Regards
ilesh 24x7
Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:13 AM

How to change the field name in SUS

HI,
In the section view all PO's, I want to change the field name <b>document number</b> to <b>invoice number</b>.Please do let me know how to go about it.
Thanks in advance ,
Manu

Hi,
The text ID should be first identified in the BSP (BBP_SUS_UI/DOC_NUMBER?)
Next execute SOTR_EDIT and use the FInd button. Enter the package of the BSP object (BBP_SUS_U?) and select the language as English. Execute the program and you will a complete list of text used in SUS screen. Locate the text ID as above and double click to change based on what you need.
Regards.

How to change the field name

I want to change the field name in Oracle schema
Can I do ir?
If yes, please tell me how to type the SQL
Thanks

Use ALTTAB command of my freeware SQLPlusPlus to ALTER a table anyway you like including inserting columns within the middle of the table.
regards,
M. Armaghan Saqib
SQL PlusPlus - Add power to command line of SQL Plus
SQL Link for XL - Integrate Oracle with XL
Download free: http://www.geocities.com/armaghan/
null

How to change the field status of "plant" of standard activity ?

hi,dear all:
I want to know how to specify the field status of "plant" of standard activity from "ready for input" to "required entry".
Can the field of the stand network be changed?
Thanks.

Hi,
Try in T-code OPN6
Regards,

How to change the field 'Current Planning Period' in xRPM portal?

Hello All,
In xRPM portal, under portfolio management --> financial planning, we have a field 'Current Planning Period'.
Can anybody tell how to change the values of this field for all the projects/items at once?
Also, when I am trying to change for individual projects. its opening the F4 help but not selecting the date on which I double click.
Thanks
Niti.

No, you cannot add another vPC peer-keepalive configuration.
Taking down vPC peer-keepalive will not affect your vPC peer-link and vPC operation. It will be a problem if and only if vPC peer-link went down after the peer-keepalive is down first, this will cause dual active.
Regards,
jerry

Script : how to change the Field name in standard program(ZM_MEDRUCK)

Hi Experts,
I am working with SAP SCRIPT. i need to change the Field Name that is PO NO to Document No & PO DATE to Document Date.
These are assigned in data declaration as gv_name and gv_date.
Can anyone help me to change this Fields.
Regards,
Vijayan.R

Hi,
You can archive this by making change in SAP script only. You don't need to touch the standard prgm.
Debug the script and find it out which fields (In script editor) are printing these text on layout... then just replace them by creating your own text...
You can create a text in TTDTG table,, like ZZPO_NAME = ( Document Name),, and use this filed in the script editor.
&ZZPO_NAME&

Risks of changing the field length of data structure of a Cluster Table

Hello,
We are on ECC 604 and had implemented HR & Travel Management. Reporting on these applications is done in BI. We use ESS and & Mobile Travel for time, travel expenses, etc and use PCLn clusters.
There is business need to change the length of a field from 20 to 40 for the data structure PTK** of cluster table PCL1.
We are exploring various options to avoid core modifications.
We are also assessing the risks associated with changing the field length.
I am asking you for your opinion about the risks associated with changing the field length of a data structure of cluster table.
Thanks & Regards,
Manoj K Pingali

Recently, we came across the same situation where we had to change the length of a field. Let me explain you what precautions we had taken during that time.
1. Apply the where use list of that table/ Field and check whether it has been used in some program and FM or not. If yes then check one more thing that check the TYPE of another variables on which system has populating data (move, write or in FM parameters). if you will not consider this then you can land you in big trouble. (Conversion dump)
2. Ask the basis to take a dump of the production, quality and data for the safer side if something does not go right.
Now, you can do the changes in your development system and then adjust the database and see the impact of it.
Hopefully, you will not come across any difficult situation in this changes.
Thanks.
Anurag

How to change the fields in a JSF form based on a URL parameter

I am trying to build a generic JSF form of parameters which I want to dynamically change (i.e.
change which field is visible, what the label text should be, etc) based on a URL parameter.
I can set the fields using logic in the backing bean as an action on a command button pressed.
But how do I do it based on the URL parameter ? I can retrieve the URL parameter but I
don't know where to put (or hook) the Java code to do this initialization prior to
the page being rendered for the first time.
The fields in the JSF is being configured dynamically using a database table.
BTW I am using Jdeveloper 10.1.3.5
Thanks
CK

Thanks. I decided to set a Session bean to store the value of the URL parameter (if it is set)
and then to use the session bean to initialize the attributes of the fields on the JSF Page.
There also seems to be some caching of the inputText fields (i.e. it reverts back to the first
initialized value) even though I tried to change it using the URL parameter in the requestScope
backing bean. So, setting the values into the Session bean and retrieving it back from there
seems to be more reliable.

How to increase the field lenght of file uplaod in BSP application

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

How to change the field sequence in Customer master record.

Dear Friends,
We are required to chage the sequence of customer master record fields that are available under different tabs of 'General Data', 'Company Code Data' and Sales Area Data.
Our client requirement is to place all mandatory fields in the first screen of customer master record. Here the intention is to save the user time instead going and clicking multiple tabs/screens to fill information on only one or two tabs. Please suggest us the availabe solution in SAP for this requirement.
Thank you
Raghu Ram.

Hi
Step 1: Take help of a FI guy and:
The fields can be suppressed by configuring through Financial accounting > Business Partners > Customers > Account groups.
Step2 : The challenge inyou project is to have a single tab with the allowed fields
A technical guy can only help you out on this . Again This would be a huge effort since first you need to change the code for customer master. As customer master is a source of data for various documents in SD , at each place you will have to do changes in th code...I don't think it is feasible.
Instead of doing this , create an external interface for transferring the value to SAP through BAPI. this would involve integration and may be as per defined SAP standards you can use CSV files or XML files for the integration process.
This would be a better option than fiddling with SAP system
Regards
Nikhil

How to change the field size cache/buffer in a query

I query a field from sql developer, the field is cases_history, it resides in a data mart in the global network of our company.
this field is big in size, it stores logs in a sequential way, so field size increases a lot.
when i query it and try a "single record view" the field is cut off and can´t see all of its content..
WHAT I THOUGHT AND IT DOESN´T APPLY
1. maybe in database connections in the system tab, I go to the oracle data mart that i am interested in and change buffer and cache
but it doesn´t work, sql developer keeps showing part of the field
2. maybe it was then the buffer size in sql developer, so I change it, but no luck
WHAT IS THE PROBLEM HERE?
MANY THANKS IN ADVANCE

many thanks in advance for your help,
1.the data type in the remote oracle data mart is VARCHAR2(4000)
2.editing with the pencil cuts off at somepoint (which is the same line and last word)
3.this is the query I write
||select case_history from wfm_case where case_id='xxxx'||
this is to test if I can get a long case_history, which we know it is because it is fully accessible through a web solution to revise cases.
PLS note. I have a tns connection which is of the following type :
(in data sources (odbc) -- system dsn -- oracle odbc driver configuration ...oracle .. buffer size =9000 , cache buffer size =4000 and FORCE SQL_WCHAR SUPPORT is enabled
many thanks,
Jordi.

How to change the field lenght in stanard structure.

Similar Messages

Maybe you are looking for