How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

Similar Messages

How to display the folder name in a webi report at infoview

Hi all,
Suppose I have a report named "Test_Report" at location Public folder > Test_Folder> Reports_Folder
now I want to display the folder name "Test_Folder" using a variable in "Test_Report".
So that the variable will always display the corresponding folder name of "Test_Report" wherever the report resides.
Thanks in advance.

Folder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu

How to change home folder name

How to change home folder name ?

Here are the instructions from Apple on changing user short name or home directory name. I've used this on a couple of used MacBooks I've bought on eBay. And remember to go into System Preferences>Sharing and change the Computer Name in there.
http://support.apple.com/kb/HT1428

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have had some that seem to go in but I can't find them. Where should I look?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have also had some that seem to go in but I can't find them. If I try to add them again, I get a msg that they are already there. Where should I look?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

Getting the folder name of the service in Tomcat 5.5

Hi,
I am using Tomcat 5.5.
I have a problem getting the folder name my service is located in.
Ex.
\webapps\myApp\...
Here i would like the string "myApp" - does anyone know how to get this?
The reason for this is that i use a war file to deploy "myApp". I have a set of properties which i don't want to change so I put them in a file outside "myApp" called "myApp.properties". I can then easily change between a test environment and my online environment.

I don't think you understand his answer.
Reading properties files from the file system directly is a mediocre solution at best for a web application. Even if it happens to work in this particular situation.
For example you would be better off loading properties from a single properties file as classpath loaded resources and simply using the context as a key to the properties in question. You could also configure this from web environment parameters specific to the web application.
Anything that puts a hard dependency on a particular file system layout is a bad idea, anything that reads files from within a web application server is likely to be a brittle solution.
This may work, for you, in your current circumstances, but you need to understand why this is a poor approach in general.

When saving a page or link the name of the file should be the folder name, not the number in the address line

Vhttp://www.commondreams.org/view/2010/08/07-2
should be something like
What Collapsing Empire Looks Like
I want to File> save page as
or
File >save Frame as
I get
something like, " 07-2.htm"
how do I get the better name for the saved file?

Excellent request!
I notice where there is no page name (e.g., home page with just a slash), Firefox does grab the page title. If there is a way to compel this behavior for all pages, I don't recall reading about it.
If further research is unavailing, you can submit it as a suggestion. The traditional place for "non-bug feedback" is http://hendrix.mozilla.org/ but there probably are other places as well.

How to change 'created by' name in the smartform

Hi,
I have copied one standard smartform into Z_smartform. My z_smartform is having 'created by' name as in standard smartform.
Could anyone please tell me how to change that name to my name.
Thank you,
Regards,
Kusuma.

Hi,
Now I understand. I tried to reproduce your problem by copying a standard smartform and the 'Create by' had my user ID. But now you say you uploaded the smartform from a file it becomes clear.
The uploaded smartform will retain the user ID from the original form, if you want to change this copy the form to a temporary name, then copy it back again to the original name.
Regards,
Nick

How to change your user name for the Ipod nano...

Can anyone please explain how to change the user name on your Ipod nano?

hiya!
do you mean the nano's name in the ipod source list?
if so, select the ipod in the itunes sourcelist. click on it once, and pause for a second or so. you should then be able to type in what you please.
love, b

HT204490 How to change which folder shows in the open dialog box

Since upgrdaing to 10.10.3 the folder that shows is documentz which I don't use. How do I change this? I've done it before but I can't remember

How to change a field name in the client web interface

Hello,
I need to change name of the field in the Shopping cart Basic data (field Location). Where could I do this?
Thank you in advance,
Olga

Hi
<u>Which SRM Version are you using ?</u>
Incase you do not want the storage location fiels displayed in the item details then you can modify the template saplbbp_sc_ui_its_300.html to hide the field.
By creating screen variant in transcation SHD0 and implementing that screen variant in BBP_screenvariant BADI you can hide the fields.
Let me know the transaction and fields what you want to hide I can look at it.
<b>Related links -></b>
Hide field in SRM"Shopping Cart Status-> Finding shopping cart" html screen
Re: shide some search criteria in Shopping Cart Status
Note 974236 - Shopping Cart - Field control
Regards
- Atul

How to change a folder name in file manager

I misspelled a folder name and now the url is misspelled as well, and i cant see a way how to change it, does anyone know how to change it?

You can go to Develop Mode inside site admin and change folder name. Please see the screen-cast :
Thanks,
Surjeet

How to hide the folder name in a KM Navigation Iview

Hi,
Scenario,
I am using a KM Navigation Iview with LinkListExplorer Layout set. The Folder Name appears at the top of the collection.
Please can someone tell me how I can hide the folder name for the iview. i.e I do not want the folder name to appear in the iview.
Appreciate your help.
Thanks,
Vaishali

Folder name is located in the breadcrumb
remove your breadcrumb in your collectionrenderer of the layout set you are using.
Check the layout set you are using in your KM navigational iview.
Raghu

Changing a folder name

I need to change my folder name with the home icon.. this can be changed by the user icon..... but when i change it it says i might lose information.... could someone please help

Here it is again but I didn't do anything different, and it works for Rudegar. http://support.apple.com/kb/HT1428
Here's a copy and paste in case you still can get to it:
OS X: How to change user account name or home directory name
Summary Learn how to change your user account name and home directory name (which should match) by using the advanced procedure described below.
Products Affected
Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, OS X Lion, Mac OS X 10.0, Mac OS X 10.1, Mac OS X 10.2, Mac OS X 10.3, Mac OS X 10.4
About the account name
Each user in Mac OS X has a "Full Name" (referred to as "Name" in Mac OS X v10.5.8 or earlier) and an "Account name" (referred to as "Short Name" in Mac OS X v10.5.8 or earlier) as defined in the Users & Groups pane of System Preferences (referred to as Accounts pane or Users pane in Mac OS X v10.6.8 or earlier). The account name can contain up to 255 lowercase characters with no spaces. This is the name used to create a user's home directory (also known as the user's Home or Home folder) in the Users folder. Once the user has been created, the account name (or short name) cannot be changed in the Users & Groups pane of System Preferences.
Changing the account name
Though there are other methods by which an advanced user may change the short name and related information, the easier and safer workaround is described below.
Before following these steps, you may wish to back up your important data.
For Mac OS X v10.5 or later
Enable the root user.
Log in as root.
Navigate to the /Users folder.
Select the Home folder with the short name you want to change, and rename it just like you would rename any folder. Keep in mind that the shortname must be all lowercase, with no spaces, and only contain letters.
Use the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier) in System Preferences to create a new user with the Account name or Short Name that you used in the previous step.
Click OK when "A folder in the Users folder already has the name 'account name'. Would you like to use that folder as the Home folder for this user account?" appears. Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents.
Choose Log Out from the Apple menu.
Log in as the newly created user. You should be able to access all of your original files (on the desktop, in Documents, and in the other folders of this Home).
After verifying that your data is as expected, you can delete the original user account via the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier).
Disable the root user.
For Mac OS X v10.4.11 and earlier
Optional step: As a precaution, you may disable automatic login prior to performing this procedure. You might want to back up important data, too. In the event that you restart the computer for any reason before completing the procedure, this would prevent complications from having displaced the user selected for automatic login. (For Mac OS X v10.1.5 or earlier, automatic login is found in the Login preference pane. For Mac OS X v10.2 and v10.3, it is found in the Accounts preference pane.)
Mac OS X v10.3 or later: If FileVault is enabled, temporarily turn it off, which will log you out.
Enable the root user and log in as root.
For Mac OS X v10.2 or later: Open the Accounts pane of System Preferences.
For Mac OS X v10.1.5 or earlier: Open the Users pane of System Preferences.
In the Name list, locate the user account with the short name that you want to replace. This will be referred to as the "original user".
Note whether or not the original user is identified as an administrator, which appears in the Kind column to the right.
Click New User. For Mac OS X v10.3 or later, this is the plus button.
Complete the Name and Short Name fields as desired. Be sure that the Short Name is exactly as you want it to appear.
For Mac OS X v10.2: Fill in the New Password and Verify fields.
For Mac OS X v10.1.5. or earlier: Click the password tab, then fill in the Password and Verify fields.
If the user you are replacing is an Admin user, then select the checkbox for "Allow user to administer this computer". For Mac OS X 10.3, click the Security tab to locate this setting.
Note: This checkbox is dimmed and already selected if there is not another Admin user. Mac OS X requires at least one Admin user.
Click Save. (Skip this step for Mac OS X v10.3.)
Quit System Preferences.
Click the Finder icon in the Dock.
Choose Computer from the Go menu.
Open the Users folder in the Mac OS X disk.
Open the folder with the short name of the new user that you just created.
Drag the contents of this folder to the Trash.
Important: Do not empty the Trash yet. In the event that you accidentally move contents of the wrong folder, you may recover them from the Trash after discovering your mistake.
Choose New Finder Window from the File menu. Be sure to position the new window so that you can see both Finder windows.
In the new window, open the folder of the original user.
Press the Option key as you drag the contents of the original user's folder into the new user's folder (that you emptied in Step 16). This makes a copy of the contents.
Close one of the Finder windows.
Open the Terminal application (located at /Applications/Utilities/).
Type: chown -R <new_name> /Users/<new_name>
Important: Replace "<new_name>" with the actual short name of the new user you just created. For example, if the new user had the short name "jacques", you would type:
chown -R jacques /Users/jacques
Press Return
Quit Terminal.
Choose Log Out from the Apple menu.
Log in as the new user. You should be able to access all of your original files on the desktop and in the folders of the Home directory.
Important: If you do not have access to your original items, log out and log back in as root, then repeat Step 22. Also, be sure that you did not place the wrong files in the Trash in Step 16.
Choose Home from the Go menu.
Open the Library folder, then the Keychains folder inside it.
Select the keychain, which should still have the short name of the original user.
Choose Show Info from the File menu.
In the Info window that appears, choose Name & Extension from the pop-up menu.
Change the name to match the new user's short name.
Close the Info window.
Open the Keychain Access application, located in the Utilities folder.
From the Edit menu, choose "<new_name> Settings". For the user Jacques, this would appear as: "jacques Settings".
Click Change Passphrase.
Enter the desired password, then click OK. You may use the same password again or set it to match the login password of the new user.
Note: This step prevents you from discovering later that the keychain had retained an older password.
Quit Keychain Access.
Disable the root user.
If everything is working correctly, you do not need to log back in as root to empty the Trash. The folders you put there occupy a negligible amount of disk space.
Depending on what software you have installed, you may wish to rename other files and folders that may have been created under the original user short name to match the new user short name.
Once you are certain that everything is working properly, you may want to delete the Home directory (folder) of the original user, which should be empty. For instructions on how to do this, see this article.
Additional Information Note: Although you can change your Home name in Mac OS X v10.3 or later, you usually shouldn't.
Rate this article:
Not helpful
Somewhat helpful
Helpful
Very helpful
Solved my problem
Last Modified: January 24, 2012
Article: HT1428
Views: 2475086
Rating: 3.0/5 Stars
(1039 Responses)
Languages
Still need help?
Need more help? Express Lane is the fastest way to contact Apple. Use Express Lane to connect with an expert in Apple Support.
Get started
Home > Support Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller.
Apple Info
Site Map
Hot News
RSS Feeds
Contact Us
Copyright © 2012 Apple Inc. All rights reserved.
Terms of Use
Privacy Policy

The package name in the java files are modified

Hey All,
After creating a Portal Web Project, I imported the existing web applications to Weblogic Workshop. Then I found that the package names in the Java source codes are modified. The <folder name>. is added to the existing package name.
For example,
package com.symphonia.script.engine;
is changed into
package ScriptingEngine.com.symphonia.script.engine;
because ScriptingEngine is the folder name.
The package name of some other Java codes are doubled.
For example,
package symphonia.util;
is changed into
package syms-util.com.symphonia.util;
Are there any ways to avoid this package rewriting when importing web applications to the Workshop?
Thanks!
Jeff

To avoid path modifications add all 'base' paths(paths form which you will store the source code) to 'source paths' to Tools-->Project Properties-->Selected-project
Then you add files/directories to one of the source-paths.
They should not have any package modifications.
HTH,
Raj

How to change the folder name in the web report.

Similar Messages

Maybe you are looking for