How to change the fully qualified host name

Hi,
how can I change the fully qualiied host name?
Regards
Marc

Hi Michal,
I'm doing the FlightSeatAvailabilityCheck-Scenarion of the demo example and get an error. To get more details about the error I had a look in the XI Runtime Workbench. There I can see, that the wrong url is called (without the hostname) and that the access is forbidden (403). Therefore I want to change the fully qualified host name. I knew that I have to change icm/host_name_full but I don't know where I can do it (which transaction)?
Regards
Marc

Similar Messages

How to retrieve the fully qualified domain name from the IP Address?

Hi,
How can i retrieve the commplete host name along with the domain name (something like x.y.com) of a server?
I tried using the InetAddress.getHostName(), getCanonicalHostName(), etc but it retrieves me only the host name (only x in x.y.com)
Is there a way to solve ?
Thanx and Regards
Biju Nair

getInetAddress() of Socket Class will return the remote IP address in a InetAddress object.
Use the object with the getCanonicalHostName() of InetAddress class.
I may be wrong though. Cheers!

How to change Port Information shown in sicf in fully qualified host name?

Hi guys,
I want to use the CS Documentation Tool for SAP BW.
In DEV everything is OK, but in PROD I can´t execute.
I know what´s wrong, but I don´t know where to correct the error.
When I use transaction sicf -> execute -> GoTo -> Port Information I can only see the server name instead of the fully qualified host name.
Can anybody tell me, where to change the name?
Thanks a lot,
Barbara

Those ports are defined in the instance profile of the system and can be defined/changed from RZ10. The parameter is icm/server_port_xx. If the parameter is not defined then it uses the default values.
The profile values looks something like this:
icm/server_port_0 PROT=HTTP,PORT=80$$,TIMEOUT=90,PROCTIMEOUT=3600
icm/server_port_1 PROT=SMTP,PORT=25$$,TIMEOUT=90,PROCTIMEOUT=3600
Hope this helps.
Thanks,
Naveed

Fully Qualified Host Name

We Have installed Oracle 10g AS and Later Configure it by Changing the Canonical setting to "Off" from Status "On" in the httpd.conf file in apache Directory. so that we can access our application by ip address in place of host name.
After that whenever i tried to to log on to the single sign on it gives error "SSO Failure ........." However it shows in the address bar that the sing on was successfull but the URL same as that fully qualified host name.
now if i change the Host name to the IP everything goes on well
Could anyone please help me to Resolve the issue
Thanks in Advance

Later Configure it by Changing the Canonical setting to "Off" from Status "On" in the httpd.conf file in apache Directory. so that we can access our application by ip address in place of host name.Oracle's AS and related software is heavily dependant on the FQDN (fully-qualified domain name, or how you seem to be referring to the "host name") and how the browser refers to the AS in many places: not just SSO, but Portal, the IAS-Console, and many pieces-parts that support them. I would seriously suggest considering alternatives to trying to refer to the AS by its IP address, especially because the IP address is allowed to change, but oftentimes the hostname is not! That can only become confusing if the IP-address of the machine ever changes. :( I am also very confident that you will have serious issues allowing users outside of your system to use the Oracle Reports that you are developing.
If you are simply developing a J2EE application that refers users to the Oracle Reports servlet, I would highly recommend finding a solution which uses the FQDN of the system rather than its IP address.

How to set-up Fully Qualified Domain Name in WIN2k3?

Dear Experts,
Admin, please rederict if this is the wrong forum.
I need to set up a FQDN for our one host demo system running on Windows Server 2k3. How do I set it up (without compromizing our system)? On this host we have ECC 6.0 and GRC running.
We don't have a registred domain.
Kind Regards,
Vit Vesely

Hi,
Set your domain name as FQDN (fully qualified domain name.)
1) start the transaction RZ10.
2) select INSTANCE Profile name where your server name is given.
3) Select Extended Maintenance.
4) Click on change button.
5) Change parameter icm/host_name_full to FQDN
6) Copy your settings with new version number.
7) Activate that version.
8) Restart your WAS (Transaction code SMICM -> Administration Menu).
Check that the following services are active in your ICF setting (transaction code SICF)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
Set Request Hanlder Class, add Standard Class provided by SAP to default\sap\bc\bsp\sap service. Right click on default\sap\bc\bsp\sap service service.
Now select display service, go to Handler Tag, and add the class CL_HTTP_EXT_BSP, which is a default HTTP request handler class.
Specifically for fully qualified domain names problems,
see:
434918 Configuration for fully qualified host names for BSP
654326 Domain restrictions in a portal environment
654982 URL requirements due to Internet standards
677118 SP31 >: Fully Qualified Domain Names Check
763427 Error message for domain name with underscore
Regards
Krishna

Fully-Qualified Host Name empty in SMSY

Hello,
I am facing a problem in the SMSY of Solution Manager.
I've got some servers listed in the "servers" tree of the landscape components. Fine. But for all of them, the field Fully-Qualified Host Name is empty.
I need this entry for generating RFC with full host name....
If I put the full host name manually in this field, the RFC are right generated with the full host name in the technical data. But I would like to know how to retrieve it automatically (from SLD I presume...).
Anyone could help me ?
Thanks a lot.
Regards

Hi
Please have a look on the SAP note [Note 1368267 - Transfer fully-qualified host name|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1368267]
from SLD data capure please refer this
[http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm|http://help.sap.com/saphelp_sm32/helpdata/en/5c/36329947af074182eef7585ba88ee8/content.htm]
Jansi

Fully Qualified Host Name for XI Repository etc?

Hi everybody!
How do I get XI 3.0 to generate a URL for the IB:Repository and Directory, for example, with a fully qualified host name, instead of just http://sap2:50000/...? I already implemented Note 773830, but it hasn't helped. Any ideas?
Thanks a lot!
Francis Wolf

That is the beauty of XI...
Put an entry in your laptop or desktop pc
with the hostname and FQD...
IP hostname FQD name
Then it should show up...
John

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi, Im trying to get the whole path in my server, so i tried that with this following code
Get-ChildItem $sourceFolder -Recurse | ?{$_.PsIsContainer} |Get-Acl
But then, it showed me somtehing like this :
Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
but all of the trick just dont work
is there any way to solve this problem? thanks

There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
will be relative to that psdrive and not to what is specified as the $sourcefolder.
unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

How to change the output executable file name(a.prj:(output)--- b.exe)

LabWindows / CVI： how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.

You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Fully Qualified Host Name does not work

Hello,
I've EP 7 with Usage Types AS Java, EPC, EP, BI Java, BP-ERP & XSS.
I am using fully qualified hostname by means of making entries in hosts file at OS level. I've also set icm/host_name_full parameter correctly.
Now when I enter URL as http://<fully qualified hostname>:<port>/irj/portal I am able to login to the system but after which if I try to navigate through any links under Employee Self-Service and Manager Self-Service for e.g. Employee Self-Service --> Benifits and Payment --> Request Claims, nothing happens. neither it throws any error nor does any page is displayed.
Same thing when I try without using fully qualified hostname like http://<hostname>:<port>/irj/portal it works absolutely fine.
I have done same settings as described above on my development as well as production system where it works absolutely fine with fully qualified hostname.
Regards,
Kashyap

Hi
if you are using proxy try adding your domain name in your proxy exceptions list
Internet Options ->Connections ->Lan Settings->Proxy Server ->Advanced->Exceptions . try adding your host name to that list
hope it will work.
Jo

How to change the limitation of Table name's length?

The length of table's name or field's name is limited to 30 characters.
Can I change it? If I want to create a long name table,then how can I do?
Thanks in advance!

This is a duplicate of another question
How to change Table name's length?
The short answer is no, you cannot.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

FQHN (Fully qualified host name)

Hi all,
I'm trying to use FQHN in my PI 7.0 installation. I'm not a basis guy but I have installed a successfull instance without using FQHN before, now I want to do this again using FQHN.
I need information on this topic; such as where to set the host name to a FQHN. Is there a guide on this? Any related links and help will be very much appreciated.
Regards,
Gökhan

Hi again,
I have observed that my host name is used in these places:
etc/hosts file
Exchange Profile hostname parameters
SLDAPICUST transaction
RFC destinations like SAPSLDAPI, LCRSAPRFC etc
Visual Admin: SLD Data Supplier, Destinations -> PMISTORE, JCO RFC Provider
Also, there's an icm/host_name_full parameter in RZ10, which I have changed accordingly.
I have made up a FQHN for my server, which I configured from the computer name in the Windows settings. It has a form like myhost.mydomain.com and it is not on a domain. I have a basic local installation.
In SAPInst, I entered my host name as only , as it would not let me use the form myhost.mydomain.com. Afterwards, I have changed the name in the places I have listed above.
Is this enough for SAP standards for FQHN or have I missed any steps? I really need a guide on this.
Thanks,
Gökhan

Must I reinstal Oracle if I change the server's host name

My oracle817 is running on the windows2000 platform and works well.
But when I changed the W2K server's host name, the OracleOraHome81Agent service can't be started. What's wrong with it? Must I reinstall the oracle to comply with the host name?
Thanks in advance
John

Eric Walton wrote:
I do NOT want to change the adminstrator short name or the administrator password. But I'm wondering whether I can change the administrator long name (account name?) by editing the "Name:" field in the administrator's account pane under the Password tab. And if I can change the name is this is a good idea or will I open a pandora's box of problems.
I changed the long name & did not observe any problems.
Permission problems? - will there be ownership problems if the account owner's long name is changed but the short name is not,
Mac OS X uses the short name internally.
Login problems? - I assume the login window will show the usual picture icon for the administrator but with the new long name. And by clicking the icon I'll have no problem logging in as long as I supply the old unchanged password.
correct
File sharing problems? - If I want to login (Connect) to the administrator's account from another machine then could I use either the new administrator long name or the old unchanged short name to do this?
Have not tried this. You can use the short name.

How to change the fully qualified host name

Similar Messages

Maybe you are looking for