How to change the Function Keys functionality?

Hello everyone I'm new here :)
I have a stupid big problem which is whenever I try to click the function keys in Programs, Games, etc.. it doesn't work for that program or game it just does what's on them!
For an example when I click on F10 or F9 it changes the volume, and when I click on F2 and F3 they change the brightness of the screen!!! And F5 doesnt refresh!!! Thats it they do nothing else at all, how can I change that to their old original ways like in Windows Vista and XP!!!
I'm not sure if the problem is with Windows or Toshiba Laptop, I have a Toshiba Satellite Windows 8.
Pleaaaaaaaaase someone help! This is urgent.

You can change it to work in standard mode.
To do this open Toshiba desktop Assist > System settings > Keyboard and change Function keys mode to Standard F1-F12 mode.
After restart check it again.

Similar Messages

Changing the FN key function

Hello.
I don't remember how, but I accidentally changed my FN key function to "Show Desktop".
This means that every time I press "FN" it shows my desktop.
How do I disable this?
Thank you very much for your help.
Itai.

That was it. Sorry for my easy-to-solve question
Thank you very much!

HT3625 How to change the audio port function (input, output) on OSX 10.9.2 !!!! :(

The thing is that i saw some videos, and search for options of how to change the audio port. And even apple says that i have to change it from system preferences, but when i try to change it, the option doesn't appear me.

Need Help on How to Change The Encryption Key and or Change security settings

Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
Message Edited by DARK_MARIO on 01-06-200706:10 PM

Hi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings.

How to change the name of function module ,generated by SMARTFORMS

Dear All,
As you all know, SMARTFORMS generates one function module.
The default name is somewhat like    /1BCDWB/SF00000099
instead of, i want to give some specific user defined name.
how to do???

Hi,
I think its not possible to give it a user defined name, but you can assign it to a variable and use that variable name instead.
Please see the code below
Data: V_FMNAME type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
             EXPORTING
               formname                 = 'ZSMARTFORM'
              VARIANT                  = ' '
              DIRECT_CALL              = ' '
            IMPORTING
              FM_NAME                  = V_FMNAME
            EXCEPTIONS
              NO_FORM                  = 1
              NO_FUNCTION_MODULE       = 2
              OTHERS                   = 3
           IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
          CALL FUNCTION V_FMNAME
           EXPORTING
            ARCHIVE_INDEX              =
            ARCHIVE_INDEX_TAB          =
            ARCHIVE_PARAMETERS         =
            CONTROL_PARAMETERS         =
            MAIL_APPL_OBJ              =
            MAIL_RECIPIENT             =
            MAIL_SENDER                =
            OUTPUT_OPTIONS             =
            USER_SETTINGS              = 'X'
              wa_itab1                   = wa_itab1
              wa_itab2                   = wa_itab2
              wa_itab3                   = wa_itab3
              wa_itab4                   = wa_itab4
            IMPORTING
            DOCUMENT_OUTPUT_INFO       =
            JOB_OUTPUT_INFO            =
            JOB_OUTPUT_OPTIONS         =
            TABLES
              i_itab1                    = i_itab1
              i_itab2                    = i_itab2
              i_itab4                    = i_itab4
              i_itab3                    = i_itab3
          EXCEPTIONS
            FORMATTING_ERROR           = 1
            INTERNAL_ERROR             = 2
            SEND_ERROR                 = 3
            USER_CANCELED              = 4
            OTHERS                     = 5
          IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
Regards,
Manish

Satellite L40-14G: How to change the "Lid closing" function

Hi,
if I close my notebook Toshiba Satellite L40-14G, PC went to sleeping mode.
But I want that if I close it PC don't went to sleeping mode but it should work normally and display swtich off.
How can I do it?
Thank you for answer!

Do you have Vista?
If yes then follow this steps:
- Go to control panel
- Energy/Power options
- At the left click on the option called something like choose what should happen when Lid was closed
Greetings

I want to change the "f" keys on my keyboard, how do I do this?

hey, I want to change the "F" key functions on my keyboard, how do I do this with mozilla?

don tishman wrote:
When my Mac Pro starts up, a rectangular magnyfying glass appears, how can i get rid of this magnyfying glass.?
By posting the same question numerous times, you are more likely to make people ignore your posts than help. You have been given one reply 3 threads back. Go to System Preferences > Universal Access > and turn off Zoom under (Seeing)
Pete

How to change the default KeyBinding of the TableView ?

how to change the default key binding of the TableView ?
When press Enter key on a editable TableView, the default action is to make the selceted cell to a editing state. I want to know if there is any way to make it select the right cell and wouldn't change the editing state of the selected cell when i press Enter key.
here is something i've done.
      table.setOnKeyPressed(new EventHandler<KeyEvent>() {
               @Override
               public void handle(KeyEvent e) {;
                    table.requestFocus();
                    KeyCode code =e.getCode();
                    if(code == KeyCode.ENTER){
                         try {
                              new Robot().keyPress(java.awt.event.KeyEvent.VK_RIGHT);//XXX
                         } catch (Exception e1) {
Thanks,
ahiwoo
Edited by: 911579 on 2012-2-1 上午3:15
Edited by: 911579 on 2012-2-1 上午6:26
Edited by: 911579 on 2012-2-1 上午6:41

thanks jsmith. now it works well.
     table.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
               @Override
               public void handle(KeyEvent e) {
                    table.requestFocus();
                    KeyCode code =e.getCode();
                    if(code == KeyCode.ENTER){
                         try {
                              new Robot().keyPress(key);//XXX javafx has no robot for key type...
                         } catch (Exception e1) {
                         e.consume();
          });

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

Please tell me exactly how to remove the AVG search function

Please tell me exactly how to remove the AVG search function
''edited by a moderator for clarity''

You don't need to repeat yourself dozens of time or use profanity to get help here.
(1) Disable ALL nonessential or unrecognized extensions on this tab. Not sure what it does? If in doubt, disable:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Use of the links above a disabled extension to restart Firefox if any appear.
(2) Reset your search providers to Google:
https://addons.mozilla.org/en-US/firefox/addon/searchreset/
(3) Check for a user.js file (do this before exiting Firefox, otherwise the settings in that file can undo your cleanup) as described in this article: [[How to fix preferences that won't save]].
(4) If AVG search took over your new tab page (Ctrl+t), change that as follows:
(A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(B) In the filter box, type or paste '''newtab''' and pause while the list is filtered
(C) Double-click the '''browser.newtab.url''' preference and enter the desired value for your preferred page:
''(i) Page thumbnails (default)'' => about:newtab
''(ii) Blank tab'' => about:blank
''(iii) Built-in Firefox home page'' => about:home
''(iv) Any other page'' => full URL to the page
IMPORTANT: If you have AVG software in your Windows Control Panel, you may also need to remove it there.

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

How to stop the option key from changing tools when trying to subtract from a selection?

How to stop the option key from changing my tools when I am trying to subtract from a selection?
I'm running CS3 on Mac OS Leopard, and the automatic tool switching slows me down, but even preferences doesn't show a way to turn this off.
Thanks for your help.

With any marquee tool, JUST holding down the option key should not switch tools. You need to explain the problem much more carefully, It's completely impossible to tell from your description whats going wrong.
automatic tool switching
The only preference related to this, is to do with the SHIFT KEY - "use Shift key for tool switch".

How do you change the shortcut keys for Firefox in Welsh For Mac?

I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
Thanks.

This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
<pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
<!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
<pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
<!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

How to open the Data Perspective function of Smart View in EAS?

How to open the Data Perspective function of Smart View in EAS?
I use my Smart View to connect one ASO cube, and I found the button of Data Perspective is grey. It's not available.
In Smart View Users' Guide, it says:
Note: Data perspective may not be enabled in your Smart View system. Your options for data perspective are enabled and configured by the administrator in Oracle Essbase Administration Services.
But I could not find how to configure the this option in EAS.
Does anyone know about this?

I have already turned on the varying attributes function, but the data perspective button is still grey, not available.

How to implement the barcode printing functionality working on the Prod.

Hi,
Can anyone help me "How to implement the barcode printing functionality working on the Prod".
Thanks
Gangadhara

Check this link --> barcode

How to change the Function Keys functionality?

Similar Messages

Maybe you are looking for