How to change the input and output schema in BPEL process

hi',
Please tell me how to change the input and output schema in BPEL process after the process is made.
thanks
Yatan

If your intention is just changing the content you are passing to bpel/returning from bpel
Here is another way
just update your default created xsd files with new elements, update wsdl elements in message definition and chnage bpel code to reflect new elements in activities
Regards,
Praveen

Similar Messages

How to view the input and output layouts created in the planning folder?

Hi all,
How to view the input and output layouts created in the planning folder in the bw 3.5?
Thanks
Pooja

Hi,
You can refer to this link. How to create planning folder and executing the planning folder.
http://help.sap.com/saphelp_nw04/Helpdata/EN/5d/7c4b52691011d4b2f00050dadfb23f/frameset.htm
Hope this helps

How to control (the input and output) EXE file after I call it using exec?

Hi,
I knew that I can use runtime.exec() to call one EXE file, and this works. But this EXE has two characteristics:
1. After this exe starts, it asks user to input number such as 1 or 2 onto computer screen, then press return. Then the exe will start the calculation.
2. after it starts calculation, it prints 3 columns of numbers onto the screen.
My two questions are:
1. How to use java to input the number such as 1 or 2 automatically? this EXE can not work like this in DOS command line:
C:> file.exe parameter
The parameter is the number such as 1 or 2 that I wanna input.
2. how to redirect the 3 columns of numbers from computer screen to txt file?
My colleague can solve these two questions using Mathematica. So I know that definitely there is at least one solution for it. I just can not do it using Java. This wierd exe file bothered me a lot and I really wish that I can get help from someone in java community.
Thank you!
Tony

When you call Runtime.exec, you get a Process object. (I presume something similar happens when you use ProcessBuilder.) Process has methods with names getOutput, getInput, and getError. These correspond to the standard input, standard output, and standard error streams of the spawned process.
You can read and write to the process on the streams corresponding to input and output that the process writes to the console.
[add]
In fact, you should be grabbing and reading the output/error streams anyway, because of the points raised by the Traps article. Google "Java Runtime exec traps" and you'll probably get a link to this JavaWorld article, which describes common Runtime.exec problems and how to solve them.
Edited by: paulcw on Jun 15, 2010 4:09 PM

How to set the input and output of a subVI

I am trying to configure a subVI by following Chap. 7 of "LabVIEW fundamentals". But I stuck at "Building the connector pane".
My subvi is quite simple, just for testing purpose. I plan to do a summation and display the result. So I placed one numeric Add icon on the block diagram and a numeric Indicator on the front panel. I built a connector pane with three terminals, two for input and one for output.
But, how could I associate the terminals on connector pane with inputs and outputs of terminals on the block diagram? I wanna build a subVI, whose input are two numbers and display the summation on the subVI.
Forrest Sheng Bao, Ph.D.
Assistant Professor, Dept. of Electrical & Computer Engineering
University of Akron, Akron, OH, USA
https://sites.google.com/site/forrestbao/

Hi Forrest Bao,
use the right mouse key as often as you can in LabVIEW. It´s very helpful. If you right click on a link in the connector pane, then you can select to disconnect selected or all.
Mike
Message Edited by MikeS81 on 08-28-2008 01:33 PM

How to get the sine wave sample of the input and output in the same time?

I discovered that the samples were acquired did not in the same time in my vi.Could you tell me how to get the sine wave sample of the input and output in the same time?
Output:9263;
Input:9201
Attachments:
singal requency.vi ‏104 KB

Hello Yun_Zhu,
Your VI looks like you started from an example, and you are on the right track.
To clarify are you trying to synchronize the input and the output waveforms? If you you will need to share a time base and a start trigger. Check out the synchronization examples from LabVIEW
Anthony F.
Product Marketing Engineer
National Instruments
Attachments:
HIODAQmxSyncMultiDev.png ‏70 KB

How can I make Apple Earphones be the Input and Output for Audio

I have some older headphones and they aren't compatible with a Mid 2010 (Intel Core i3) 21.5 Inch iMac
Is there some way to make Apple Earphones be the Input and Output for Audio in the iMac
This is a problem for me personally as when I am talking to someone on Skype the iMac picks up the In-built Microphone audio, and yes the headphones I'm using do work straight from the iMac as audio output
Any help is appreciated

you can connect the headset to something like this
http://www.ebay.com/itm/NEW-MaelineA-3-5mm-Female-to-2-Male-Gold-Plated-Headphon e-Mic-Audio-Y-Splitter-/381100440348
and then connect the mic to the input and the headset to the headset port

How to change the input language ?

Hello,
I am writing an Add-on that needs to change the input language when the user
clicks on the Item Code field ("5") in the "Item Master Data" form.
I can perform the change when I am out side of the SAP application (for example if I create a Windows Form), however I cannot control the input language of the SAP itself through code.
I even tried using Application.Sendkeys, however I was unable to send a combination of ALT+SHIFT, or at least it did not have any affect
Here is the code on how to change the input language on a Windows Form:
For Each Lng As system.Windows.Forms.InputLanguage In system.Windows.Forms.InputLanguage.InstalledInputLanguages
   sValue = Lng.Culture.DisplayName.ToUpper()
   If sValue.StartsWith("ENGLISH") Then
                    system.Windows.Forms.InputLanguage.CurrentInputLanguage = Lng
                    Exit For
    End If
Next
Any ideas ?

I am not sure I understand the problem. Anyway in B1 you change the language by
changing it from the Administration module. This raises a Application event that
is sent to all the add-ons. The event is aet_LanguageChanged and you should
then change the language handled by your add-on when you receive it.

How to change the font and colour of the PL/SQL Editor in forms

Hi All,
I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
in my eyes daily...Please any body help me how to change the color and font
of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

Hi
Thanks for the reply..
But I personally feel that Oracle people should have done this since
any editor should allow us to change the font and colour...any way lets
hope that in the future releases that may happen...
Raghu

How to change the font and type in the front panel

Can you tell me how to change the font and type in the front panel if i want to make it looks more beautiful.
1110340040

Hi there,
You can change the font size and type as shown below:
- Ee Lim -
See that button on the left side of this post...
If you feel my post is helpful, all you need is just (at most) 2 seconds to click that button, to show your appreciation. Thank you~~

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

My ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

my ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

When you set up tracks what is best to pick for the input and output?

When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

First part of the question I don't understand, so could you elaborate please?
Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

[ dwm ] How to change the wallpaper and make windows transparent ?

How do I change the wallpaper and make windows transparent ( ~ 20% ) ?
Have been Googl'ing for a while now but still have no clue on how to achieve it

zowki wrote:
SemiBz wrote:Thank you! And how would I set terminals to be transparent by default ? xcompmgr can be started automatically but transset requires user input
What terminal do you use? urxvt can set transparency in the Xdefaults file.
revenant wrote:
> What terminal do you use? urxvt can set transparency in the Xdefaults file.
Or, if you don't like fiddling with Xdefaults file, you can simply make urxvt transparent by executing it like "urxvt -tr -sh 20", where the number represents the transparency level. However, this is only pseudo transparency, but I like it better than resource-consuming compositing.
Will give it a try. I'm not against .Xdefaults - just haven't used it that much and know only the basics ( color schemes )

How to change the input variable xml structure before invoking an ext. serv

Hi all;
I have a bpel. in my bpel i have an invoke activity which calls an external webservice. I call my bpel with the input below.
*<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">*
*<SOAP-ENV:Body>*
*<requestCustomerAccountBalance xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<header xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<application xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</application>*
*<operationDate xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">03/14/2011 14:51:37</operationDate>*
*<operationName xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</operationName>*
*<transactionId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">3424342</transactionId>*
*<userId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">tuba</userId>*
*</header>*
*<msisdn xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">5356474828</msisdn>*
*<applicationName xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</applicationName>*
*<channel xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">CSI</channel>*
*<clientTimeStamp xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">03/14/2011 14:51:37</clientTimeStamp>*
*<transactionId xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">3424342</transactionId>*
*<accountType xmlns="http://impl.ejb.service.almanak.baca.turkcelltech.com/">ACC</accountType>*
*</requestCustomerAccountBalance>*
*</SOAP-ENV:Body>*
*</SOAP-ENV:Envelope>*
Before invoking the ext. service i want to change the input as follows.
*<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:impl="http://impl.ejb.service.almanak.baca.turkcelltech.com/">*
*<soapenv:Header/>*
*<soapenv:Body>*
*<impl:requestCustomerAccountBalance>*
**
*<header>*
**
*<application>?</application>*
**
*<operationDate>?</operationDate>*
**
*<operationName>?</operationName>*
**
*<transactionId>?</transactionId>*
**
*<userId>?</userId>*
*</header>*
**
*<msisdn>5356474828</msisdn>*
**
*<applicationName>CSI</applicationName>*
**
*<channel>CSI</channel>*
**
*<clientTimeStamp>20101010</clientTimeStamp>*
**
*<transactionId>676767</transactionId>*
**
*<accountType>ACC</accountType>*
*</impl:requestCustomerAccountBalance>*
*</soapenv:Body>*
*</soapenv:Envelope>*
HOW TO ACHIEVE THIS.???
Any comment would be appreciated.
Best Regards

You can go through the below thread for removing the namespce
Removing namespace from xml created
http://beatechnologies.wordpress.com/2008/09/25/stripping-namespace-from-an-xml-using-xquery/
Edited by: 333333 on Mar 17, 2011 6:44 PM
Edited by: 333333 on Mar 17, 2011 6:45 PM

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to change the input and output schema in BPEL process

Similar Messages

Maybe you are looking for