How to change the langage pack in the N958GB ?

How to change the langage pack in the N958GB ?
I bought this N95 8GB in greece and it has only greek/english
How to put french/english ?

You have taken the handset to a part of the world for which it was not intended.
Your only option is to take the phone to a local Nokia Care Point, explain that you bought the phone in Greece and ask them to install a French language pack. They may charge you for this.
Also note that your French language pack will be erased whenever you update the phone's firmware and possibly when you perform a reset as well.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • How to change the format in shipping point

    Hiii.. When we define shipping point, how to change the format from hours to days for entering loading time & pick pack time.
    Regards,
    Jay

    When you maintain working times in define shipping point, the time is maintained in HRS. This is called precise scheduling.
    If u do not mainatin the workin times field (blank) then the time is maintained in days. This is daily scheduling.
    Vishal

  • How to change the language of CS6 from Chinese to English?

    Dear Sir / Madam,
    How to change the language of CS6 from Chinese to English?
    Please give me advice.
    Many thanks,
    Eddie

    Language depends on what version of license you've bought. If you've bought a 'Chinese' license, you're stuck with 'Mandarin' or 'Cantonese' UI language.
    If you purchased a Multi-lingual license (which I doubt they sell these days) and if you did install the 'optional language packs' when installing Photoshop, go to Photoshop Preferences (Edit > Preferences in Windows, Photoshop > Preferences in Mac) > Interface > UI Language - change here.
    Also, keep in mind that if you do change the language with multi-language installation or change your locale, Photoshop may ask you to re-enter and re-activate your license.

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the default apex port

    hi,
    i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
    URl: http://hostname:7777/pls/apex
    My EBS R12 running on http://hostname:8007.
    is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
    Before change : http://hostname:7777/pls/apex
    After Change : http://hostname:8007/pls/apex
    Thanks in advanace....

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to change the default Path of Prompt Played by MicroApp

    Hi
    I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
    Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
    Please advice how we can customize the MicroApp Media path.
    regards
    Kapil Kumar

    Hi Kapil,
    Try this in your ICM script, define set variables i.e.
    set Media Server= ip address of media server
    set Locale = en-us
    set input Type = DTMF only
    set App Media Lib = " you new location i.e. test "
    So, the application path will be
    http://media server ip address/en-us/test
    hope this helps.
    Cheers

  • How to change the default SSH port on Cat 6500 WS-SUP720-3B

    I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
    entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
    Thanks in advance..

    Hi Neil,
    Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
    Regards,
    Nicolas

  • How to change the Default login script and the USER login script in Netware3.12

    I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
    please tell me
    how to change the Default login script and the USER login script in
    Netware3.12 ?
    Or is there any other ways to do this thing?
    Thanks a lot!

    On 4/6/2006 [email protected] wrote:
    > how to change the Default login script and the USER login script in
    > Netware3.12 ?
    Please repost in the discontinued.forums.
    Edison Ortiz
    Novell Product Support Forum SysOp
    (No Email Support, Thanks !)

  • How to change the default database charset to ISO8859-1?

    Hi all,
    I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
    Thanks in advance.
    chin.

    Thank you!
    I will try later!
    But,who can tell me more detail !
    thx

  • How to change the default time?

    when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

    Please see the following link for information on configuring the interdigit timeout.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
    Hope this helps. If so, please rate the post.
    Brandon

  • How to change the default currency in CJ32 and CJ33

    Dear all,
    As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
    Could any one help me? Points will be awarded.
    Thank you.
    Christina.
    Edited by: Virendra Pal on May 5, 2010 8:34 AM

    Hi Christiana ,
    Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
    Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
    Regards
    Judy

  • How to change the default "Safe" files in Safari?

    I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
    I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
    I'll be gratefull for any help. Thanks.

    Hi MDRC,
    Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to change the default port of webdispatcher

    Hello Everyone,
    We wish to  know to how to change the default port of SAP webpatcher port from 81$$ to 80.
    Appreciate your response.
    Thanks,
    Vadi

    Hello Vadi
    you have to change the PORT value in your profile parameter from 81$$ to 80
    icm/server_port_0 = PROT=HTTP,PORT=81$$ to
    icm/server_port_0 = PROT=HTTP,PORT=80
    Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
    $$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
    thanks
    Bhudev

Maybe you are looking for

  • Long text uploading problem in BDC

    Hai Gurus please help me, it is urgent i want to upload more than 200 characters filed from flat file to every inspection lot record usage decision(QA11) through BDC for every inspection lot Brief description about my problem:   in the transaction QA

  • Byte array exception in web dynpro

    Hi all, I am developing a web dynpro application using a webservice model. The model expects a parameter in the form a byte array. But  unfortunately when I get the following exception when i lauch the web dypro application. Anyone of you, plz help m

  • How can I use eCompanion in the Author mode with the visual editor in Firefox?

    Our college uses eCompanion, but the current platform on works with the visual editor in the XP version of the Windows operating system. Online Chat help said that using Firefox with the Xihna Here plugin was a successful work around. I am unable to

  • Clicks in Bnce! (both Offline and Online)

    ... i seem to be haunted by clicks and pops since installing LP8... Anybody else have clicks when bouncing down ?? Thanks!

  • Messages beta keeps crashing

    I can't uninstall because it crashes before I can open the menu to uninstall.  Any suggestions on how to get ichat back and remove messages?