How to change the language in FF so that each user (in the same PC) can have meny-language etc in their own language?

I have a PC that is used primarily by 3 persons. Each of us speak different languages (Finnish, Dutch and Norwegian) English being the common language. Each of us would like to browse and have the meny-language in FF in our own languages.
I'd like to customize each users accounts on Windows XP so that FF is the main internet-browser and that it then is in their own language on their accounts.
In some cases it would be good to be able to change the browser-language also within a useraccount. I can't find this feature in FF (in Opera this is done in 3-4 clicks)
So, how to do this customazation and language-change in FF?

Install the language packs for the additional languages available from http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.12/win32/xpi/
As you have the Finnish version of Firefox, the additional language packs are Dutch - nl.xpi, Norwegian (Bokmål) - nb-NO.xpi, Norwegian (Nynorsk) - nn-NO.xpi, and if you want English you can use en-GB.xpi
To assign a particular language, you can change a hidden preference:
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''general.useragent.locale''', double-click on it and change it to the code for the language, for example '''nl''' for Dutch
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/1333/ Quick Locale Switcher] add-on to switch between installed languages.
For more details see http://kb.mozillazine.org/Language_packs

Similar Messages

  • How to change the same cell in multiple tables at the same time

    help if you can,
    i have a workbook
    workbook has 10 sheets
    each sheet has 1 table
    when in excel you were able to select a sheet then hold control and select another, this would group the sheet as if to make them the same. change a single cell in one of the sheets and this changed cell would be also be changed in all grouped sheets. is there the same functionality in numbers?

    It's funny.
    This question was asked several times in the last ten days.
    The feature is unavailable.
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'10
    Yvan KOENIG (VALLAURIS, France) jeudi 8 octobre 2009 18:57:14

  • How many of the same game can I buy and still get the 20% off.

    I am a gamers unlocked member, and my friends and I want to buy the Batman Arkham Knight $99 version. I already preordered mine so I should get it for $80 like I did for Destiny. My question is if I preorder 2 more copies will I also get the 20% off them as well. I remember a while back ready you can purchase up to 3 games on the same console. Please help.

    Hello Romyv0124,
    I'm happy to hear that you've placed your pre-order with Best Buy for Batman Arkham Knight.  Thanks too for being a My Best Buy Gamers Club Unlocked member.
    It is correct that you can purchase up to 3 copies of a title per console.  I would like to add, though that your My Best Buy membership is for individual use only and not intended to be shared.  
    Please let us know if you have any additional questions.
    Game on,
    Mike|Social Media Specialist | Best Buy® Corporate
     Private Message

  • R12-Please let me know how to change the product status

    Hi,
    We are looking to change the "INV" product status from "shared" to "Fully installed".Please let me know,how to change the same.

    Hi,
    Did you verify the current status of the product?
    Note: 443699.1 - How to check if certain Oracle Applications product/module is implemented?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443699.1
    You can change the status of the product from shared to installed from OAM > License Manager. Once the product is installed, run the following via adadmin for this product (optional but recommended).
    - Generate message files
    - Generate forms files
    - Generate report files
    Regards,
    Hussein

  • HT1918 I forget the answer for questions scurity apple ID how I change the answer

    I forget the answer for questions scurity apple ID how I change the answer
    Where can I go,,

    This is currently the most asked and answered question on this forum.
    Look at the right side of this page at More Like This,  do a forum search, or just look at the other posts.  You will find this asked and answered many times over.

  • How to change the default language?

    How to change the default language of the Ubuntu desktop and of the Firefox program to Norwegian or Danish?

    While this isn't the appropriate venue to ask about changing the default language in Ubuntu, the snide forum link above lazily fails to address the Firefox language issue, and unfortunately this link now comes up on the first page of google searches about the default language in firefox.
    To change Firefox's default language, go to Edit -> Preferences -> Content, and click the "Choose" button under the Languages heading.
    To change the default language of your spell checker, right click on any text area and find the "Languages" entry in the menu, then select the language of your choice.

  • How to change the default language of form9i?

    How to change the default language of form9i? For example, change the language from Spanish to English.
    Regards!
    Gerald

    Hi,
    set the NLS_LANG parameter and make sure the language supplement classes got installed when installing the deesigntime or server. If you need to change the language for runtime, set the value in the default.env file - assuming its a web based appication
    Frank

  • How to change the language in smartform?

    hi
    how to change the language in smartform?

    Hi,
    U can't change the language in the smartform, the main language of the smartform is the language used to create it (so the language used for SAP log on.
    But u can translate it (by trx SE63) and if u need to print in a new language u have to indicate it when the smartform is called.
    U can transfer the language to be used for the print in the parameter CONTROL_PARAMETERS, like structure SSFCTRLOP, here u can indicate the language in the field LANGU.
    see this..
    Use transaction SE63, after activate your smartform, to translate.
    In the First Page of your Smart Forms click on Global Settings under that click Form Attributes
    now in the Right side screen Go to Subscreen Language Attributes.
    select the Radiobutton Translate To all Languages
    from the Translate subscreen out of three radio buttons.
    rewaards if useful
    regards,
    nazeer

  • I have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    Greetings Lex,
    Kind of you to comment ... but you are also adding years to my signature!   I know I'm 76 but I don't want to think about it. 
    Regards  71.

  • How to change the language of the document in Pages 5.0.1

    Does anyone have an idea about how to change the language of a document in the new version of Pages (version 5.0 or later) without having to restart the computer?

    Edit > Spelling and Grammar > Show Spelling and Grammar

  • I cannot find how to change the language for labels in a quiz

    I cannot find how to change the language for labels in a quiz

    You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

  • How to change the input language ?

    Hello,
    I am writing an Add-on that needs to change the input language when the user
    clicks on the Item Code field ("5") in the "Item Master Data" form.
    I can perform the change when I am out side of the SAP application (for example if I create a Windows Form), however I cannot control the input language of the SAP itself through code.
    I even tried using Application.Sendkeys, however I was unable to send a combination of ALT+SHIFT, or at least it did not have any affect
    Here is the code on how to change the input language on a Windows Form:
    For Each Lng As system.Windows.Forms.InputLanguage In system.Windows.Forms.InputLanguage.InstalledInputLanguages
       sValue = Lng.Culture.DisplayName.ToUpper()
       If sValue.StartsWith("ENGLISH") Then
                        system.Windows.Forms.InputLanguage.CurrentInputLanguage = Lng
                        Exit For
        End If
    Next
    Any ideas ?

    I am not sure I understand the problem. Anyway in B1 you change the language by
    changing it from the Administration module. This raises a Application event that
    is sent to all the add-ons. The event is aet_LanguageChanged and you should
    then change the language handled by your add-on when you receive it.

  • How to change the language of administrator system message in outlook

    I wonder where is the option which changes the language of the text
    related
    to : Your mailbox is over its size limit send by the system
    administrator ?
    Some mailboxes get this message in French and other in
    English ?
    Is anyone can help me ?
    I work with French Outlook 2003 sp2 and
    English Exchange server 2000 sp3
    I try to change the regional setting on the
    server but nothing has changed.
    Thanks,

    Hi,
    Please refer to this duplicate thread below:
    http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to change the language from english to punjabi in Xcode?

    i am trying to make an app for my religon and it requires me to make those letter sysmblos and i want to know how to change a language in xcode
    Thankyou
    reply please ASAP

    have you activated the Gurmukhi keyboard in system preferences/language and text/input sources and then selected it in the "flag" menu at thr top right of your screen?

  • I would like to know of how to change the language in my Ipod touch ?? anyone can help me please

    I would like to know of how to change the language in my Ipod touch ?? anyone can help me please

    Did you try Settings/General/International and choose your settings?
    copied from page 107 ipod touch user guide 5

Maybe you are looking for

  • Is my apple remote faulty

    I Have just changed the battery in my Apple remote and it works fine except the up button does not work at all. is this a fault requiring a new remote or is there a fix for this. not sure which Apple tv it is although only couple years old. thank you

  • How to anchor two repeating frames

    I have a tabular report with two queries, one as a parent frame and the other as a child frame. The master query is like a query displaying employees tables with some restricions. The child query is like displaying all employees that their manager_id

  • New subcription

    Dear i purchased a 60 minutes subscription for pakistan on 24th nov but i consumed all of them by 29, but on 28th i bought obne more subscription with a thought that it will add on more minutes so i dont have an uissue once my first 60 minutes expire

  • How to enter BIOS settings on my Satellite Pro S300?

    Hi It can look stupid but I'm trying to access to the BIOS menu on my TOSHIBA Satellite Pro S300-EZ1511 and i can't, i searched for that on the manual but i couldn't find anything. I need to go there so i can change the SATA settings to IDE so i can

  • Apps not showing footers

    where do I set up footers such as bookmark, forward, etc on the footer of my iPhone?