How to change the language setting in Adobe Flash CS6, from Chinese to English?

Unless you have a multilanguage serial/ installer, you are on Creative Cloud or care to run through language swap you can't. Retail serial numbers are language specific and most Adobe apps cannot be coerced or switched on the fly since without the proper language resources installed, this won't work...
Mylenium

Similar Messages

How do I change the language setting in itunes

I'm sure this is a very basic question but I just can't seem to find anywhere to change the language setting. I live in Japan but would rather use itunes in English as I've twice now deleted my entire phone book on my iphone and had to go to an old backup. I suppose I should just have my girlfriend keep setting it up like the first time but I thought the whole point of apple crap is that even a nitwit newbie like me should be able to figure out how to use it.
wondering if I should have just stayed with good old Japanese cel phones...
gartheeeeeeeeeeeeeeeeeeeeeeee

that was indeed astoundingly easy. Well one less excuse next time I delete my phone book...
thanks very much!

How to change the language of the Adobe Audition CC 2014?

How to change the language of the Adobe Audition CC 2014?

Hello Israel Costa,
it's laid down there: Adjust the install language | CCM
Good luck!
Hans-Günter

How to change the Field Symbol, so Adobe Forms takes it as a Table?

Hi guys,
I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
I looked at Adobe Form, and found this:
The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
Does someone have any idea?

Hello Taly,
To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
You have done it correct partially. I have replicated your scenario and steps are below -
1) Create a Z structure
2) Create Z Table Type
3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
4) Design Form as -
5) Code driver as -
*& Report ZR_AF_FS_1
REPORT zr_af_fs_1.
DATA: fm_name           TYPE rs38l_fnam,
       fp_docparams      TYPE sfpdocparams,
       fp_outputparams   TYPE sfpoutputparams,
       it_kna1           TYPE ztt_fs_1.
* Sets the output parameters and opens the spool job
CALL FUNCTION 'FP_JOB_OPEN'                   "& Form Processing: Call Form
   CHANGING
     ie_outputparams = fp_outputparams
   EXCEPTIONS
     cancel          = 1
     usage_error     = 2
     system_error    = 3
     internal_error = 4
     OTHERS          = 5.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
*&---- Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'           "& Form Processing Generation
   EXPORTING
     i_name     = 'ZAF_FS_1'
   IMPORTING
     e_funcname = fm_name.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*-- Fetch the Data and store it in the Internal Table
SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
* Language and country setting (here US as an example)
fp_docparams-langu   = 'E'.
fp_docparams-country = 'US'.
*&--- Call the generated function module
CALL FUNCTION fm_name
   EXPORTING
     /1bcdwb/docparams        = fp_docparams
      it_data                   = it_kna1
*    IMPORTING
*     /1BCDWB/FORMOUTPUT       =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error           = 3.
IF sy-subrc <> 0.
* <error handling>
ENDIF.
*&---- Close the spool job
CALL FUNCTION 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
   EXCEPTIONS
     usage_error           = 1
     system_error          = 2
     internal_error        = 3
     OTHERS               = 4.
IF sy-subrc <> 0.
*            <error handling>
ENDIF.
6) Output -
BR.

How to change the language of administrator system message in outlook

I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,

Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to change the Character Set from AL32UTF8 to WE8DEC

Hello!!
I want to know how to change the character set in the database from AL32UTF8 to WE8DEC.
I tried to use the comand ALTER DATABASE CHARACTER SET but I got an error because WE8DEC is not a superset of AL32UTF8.
I need to import tables from a server that uses WE8DEC. So when I do the import to my server, wich has AL32UTF8 , I can't import the rows that include an Ñ.
So I want to change the caracter set to WE8DEC. How can I do it?
Is it needed to change the language configuration? The remote server has AMERICAN_AMERICA, and my server has MEXICAN SPANISH_MEXICO (both uses text in spanish).
Thanks a lot!!

When you export from WE8DEC server what did you use
for NLS_LANG char set? And when importing?
The export was done in another computer because I can't do the export in the server (I have 10g, and the remote server has 9i and the export is not working). In my server, when I tried to do the import, the NS_LANG value was MEXICAN SPANISH_MEXICO.WE8MSWIN1252.
When I try to import to my database I got the error:
import done in WE8DEC character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing USRMCR06's objects into PRIMARIZACION
. . importing table "CHG_FONDOS_MARZO_CD_MOR"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "PRIMARIZACION"."CHG_FONDOS_MARZO_CD_MOR".
"NOMBRE" (actual: 41, maximum: 40)
Column 1 16623436
Column 2
Column 3 Pymes_1
Column 4

How to change the language in Photoshop CC2014 from Dutch to English?

How to change the language in Photoshop CC2014 from Dutch to English?

Cloud language change http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

How to change the language of GP administration role ?

Hello experts,
I'm new of Guided Procedure.
I assigned all of roles of Guided Procedure to my user,my user's language is
Chinese, but the language of all of GP roles are English.
I want to change the language, but it seems that I can't change the language of GP roles in User Administration.
How to change the language of GP roles ?
My Portal is EP7 SP6, and UME is integrated with BW DB.
BR,
Jianguo Chen

Hi,
Do you want to change language only for GP admin role?have you set portal language to chinese?if not then you can do this from following personalise link, but i guess your GP admin language has not changed.
Regards,
Ameya

How to change the language in Siena

Hey,
I want to change the language setting within the app Siena. It is very confusing to implement something in another language than English. How can I do that?

Hi General Luzi,
The language that Siena displays comes down what your computer is set in. If your computer is set to English, then it will show in English, else it will end up in another language. Currently, we only support
German and Japanese, as additional languages outside of English.
There is no setting within Siena to change the language only on your computer.
Thanks.

Hi does anybody know how to change the language of interface in demo version illustrator CC

Hi does anybody know how to change the language of interface in demo version illustrator CC ?

It doesn't help. I will try to download again illustrator
Отправлено из мобильной Почты Mail.Ru
Понедельник, 9 марта 2015 г., 18:36 +0300 от Mylenium <[email protected]>:
Hi does anybody know how to change the language of interface in demo version illustrator CC created by Mylenium in Downloading, Installing, Setting Up - View the full discussion

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?

I have just installed Illustrator CS6 yesterday, but I found it was in French. Could help me figure out how to change the language into English?
I got my series number from my Institut (which is in Paris, FR). I do not use Creative Cloud.
When I was installing the software, I cannot select a language.
Could you help me with my problem? Do I have to get a different series number?

lunc,
You will have to get a new application in English, to replace the French one.
You, or your Institute will have to get help from Adobe, I am afraid.
You may try a chat here,
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
or (have your Institute) talk to Adobe in France
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html
If you fail to get any help, please report back here, and I will ask a special forum staff friend to try to find the right one at Adobe to have things sorted out.

How to change the language in smartform?

hi
how to change the language in smartform?

Hi,
U can't change the language in the smartform, the main language of the smartform is the language used to create it (so the language used for SAP log on.
But u can translate it (by trx SE63) and if u need to print in a new language u have to indicate it when the smartform is called.
U can transfer the language to be used for the print in the parameter CONTROL_PARAMETERS, like structure SSFCTRLOP, here u can indicate the language in the field LANGU.
see this..
Use transaction SE63, after activate your smartform, to translate.
In the First Page of your Smart Forms click on Global Settings under that click Form Attributes
now in the Right side screen Go to Subscreen Language Attributes.
select the Radiobutton Translate To all Languages
from the Translate subscreen out of three radio buttons.
rewaards if useful
regards,
nazeer

I have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

Greetings Lex,
Kind of you to comment ... but you are also adding years to my signature! I know I'm 76 but I don't want to think about it.
Regards 71.

How to change the language of the document in Pages 5.0.1

Does anyone have an idea about how to change the language of a document in the new version of Pages (version 5.0 or later) without having to restart the computer?

Edit > Spelling and Grammar > Show Spelling and Grammar

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

How to change the language setting in Adobe Flash CS6, from Chinese to English?

Similar Messages

Maybe you are looking for