How to change the languaje in Audition?

How to change the languaje in Audition?

A lot of the information about this is stored in the registry. This means that you have to do a complete uninstall and reinstall, selecting the language that you want when offered the option. Sounds like a lot of work, but actually it's pretty easy and quick.

Similar Messages

  • How to change the language in Audition?

    I have just bought Audition. But I want to change the language from Italian to English. What should I do?
    Thanks.

    You will have to reinstall it in english, if that#s possible with your serial.
    Mylenium

  • How to change the Time Zone in OAM  log & audit files

    Hi All,
    I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
    Could any one please tell me how to change the Time according to the place ?
    It is an urgent plzzz.
    Thanks & Regards,
    Vaasu.

    could you find how to change the tine zone. i am also getting this problem
    thanks

  • How to change the language of the Adobe Audition CC 2014?

    How to change the language of the Adobe Audition CC 2014?

    Hello Israel Costa,
    it's laid down there: Adjust the install language | CCM
    Good luck!
    Hans-Günter

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the default apex port

    hi,
    i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
    URl: http://hostname:7777/pls/apex
    My EBS R12 running on http://hostname:8007.
    is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
    Before change : http://hostname:7777/pls/apex
    After Change : http://hostname:8007/pls/apex
    Thanks in advanace....

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to change the default Path of Prompt Played by MicroApp

    Hi
    I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
    Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
    Please advice how we can customize the MicroApp Media path.
    regards
    Kapil Kumar

    Hi Kapil,
    Try this in your ICM script, define set variables i.e.
    set Media Server= ip address of media server
    set Locale = en-us
    set input Type = DTMF only
    set App Media Lib = " you new location i.e. test "
    So, the application path will be
    http://media server ip address/en-us/test
    hope this helps.
    Cheers

  • How to change the default SSH port on Cat 6500 WS-SUP720-3B

    I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
    entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
    Thanks in advance..

    Hi Neil,
    Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
    Regards,
    Nicolas

  • How to change the Default login script and the USER login script in Netware3.12

    I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
    please tell me
    how to change the Default login script and the USER login script in
    Netware3.12 ?
    Or is there any other ways to do this thing?
    Thanks a lot!

    On 4/6/2006 [email protected] wrote:
    > how to change the Default login script and the USER login script in
    > Netware3.12 ?
    Please repost in the discontinued.forums.
    Edison Ortiz
    Novell Product Support Forum SysOp
    (No Email Support, Thanks !)

  • How to change the default database charset to ISO8859-1?

    Hi all,
    I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
    Thanks in advance.
    chin.

    Thank you!
    I will try later!
    But,who can tell me more detail !
    thx

  • How to change the default time?

    when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

    Please see the following link for information on configuring the interdigit timeout.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
    Hope this helps. If so, please rate the post.
    Brandon

  • How to change the default currency in CJ32 and CJ33

    Dear all,
    As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
    Could any one help me? Points will be awarded.
    Thank you.
    Christina.
    Edited by: Virendra Pal on May 5, 2010 8:34 AM

    Hi Christiana ,
    Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
    Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
    Regards
    Judy

  • How to change the default "Safe" files in Safari?

    I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
    I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
    I'll be gratefull for any help. Thanks.

    Hi MDRC,
    Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for

  • Error in calling RESTful (Biztalk) service , in Browser

    Hello all, I have Orchestation which have one Two way port with Two Operation in it one for GetCandidate Details and One for Insert_Candidate, Also have deployed this Orchestration and using WCF-WebHttp (Working with REST) adapter at ReceiveLocation

  • How fix "Adobe Photoshop CS6 has stopped working" error in Win7?

    Hi All, I'm getting the following error message when ever I try to use Move Tool and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify y

  • SAP IS Retail: Transferring Generic article from one SAP system to another

    Hi, I want to transfer generic article from one SAP IS Retail system to another SAP IS Retail system using ARTMAS idoc using BD10 in sending system. But I could not get article in receiving system in BD11. ARTMAS is not available in BD11. How can I p

  • 7.2.2 Update Export File TC Changes

    Updated a bunch of our edit suites to 7.2.2. Loaded our normal Export Presets to AME and PPro.  Every time an editor exports a file longer than 30seconds, the TC flips from drop frame to non-drop. As these are broadcast files for air, reporting your

  • Where can I find my registration number?

    I purchased iWork 09 on disks, not through the app store, shortly after it was issued. I've updated to version 5.2 (in Pages) and would like to get the most recent update; but I cannot find my original disks with the registration number.  Is there an