How to change the locale in Safari?

My iMac has a US version of OS X Tiger and I need to change the locale that Safari uses to the UK. I've tried changing the international settings but it has no effect on Safari. I've changed Firefox but I can't change Safari.
Has anyone else faced this problem?
iMac Intel   Mac OS X (10.4.4)  

Hi and welcome to Apple Discussions....
You may have duplicate or corrupted fonts.
Follow the instructions here for help.
Font problems and management in OS X
Carolyn

Similar Messages

  • How to change the local decimal separator on windows xp OS ?

    Hi all,
    I would like to known how to change programmatically with LV8.5 the local decimal separator ? I want to force this parameter to the point separator, so to be sure that it's not the comma (if it's the comma when installing the executable, the ascii files are not read properly).
    Thanks.
    Wilfried.

    GerdW wrote:
    Hi Wilfried,
    you can use the format code "%.;" to get points as decimal separator in each string formatting function.
    This is the important one. Put it at the beginning of every format specifier!
    Some functions have a boolean control 'use local decimator' make sure this is 'F'
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to Change the FONT in Safari?

    Hi
    I'm using a Macbook and using the latest version of Safari in it.
    Of late, my fonts have changed. And even after changing them to my desired fonts (through Safari Preferences), I could not view the pages in Changed fonts.
    For Example, my gmail account was getting displayed in Verdana. And now, its in some obscure font - which is not chosen in preferences. This is not getting changed even after changes made to Preferences. Also, there is no change in the Text Encoding.
    I have tried the time tested method of removing Safari and reinstalling the same. Still, I'm facing the same problem.
    Someone please help.

    Hi and welcome to Apple Discussions....
    You may have duplicate or corrupted fonts.
    Follow the instructions here for help.
    Font problems and management in OS X
    Carolyn

  • DMP-4400G How can I change the local time

    Hi,
    Recently I installed DMS 5.0.2 and DMP-4400G for Digital Signage. Now I am running a Flash application that is embedded into a HTML page, but sometimes the DMP does not show the content of the flash, the LCD shows a temporary error; this error never occurs when I use a standard PC with any Internet browser to display the same content. The webmaster says that DMP does not have an updated time and date. Do you know how to change the local time and date of the DMP-4400G.
    Thanks for your help.

    Jhon,
    There are couple of things...
    1. The DMP 4400G has a internal clock but at this time there is no way to change the date & time on the DMP 4400G.
    What does the date & time have to do with the Flash Content anyway?
    2. What version & type of Flash is being used for this embedded Flash content? Is the correct version selected & configured on the DMP?
    Cheers!
    T.

  • How to change the default "Safe" files in Safari?

    I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
    I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
    I'll be gratefull for any help. Thanks.

    Hi MDRC,
    Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

  • How to change the initial page without open safari

    Hi everybody,
    I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
    i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
    thx
    cheers
    nun

    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.Safari.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How can I change the settings in Safari to list the open windows chronologically instead of alphabetically?

    How can I change the settings in Safari to list the open windows chronologically instead of alphabetically?  I keep a lot of open windows e.g., 25 windows and many tabs on each) and like to work between a few at a time.  The problem is that Safari reorganizes windows alphabetically.  Once I open a new window, it take a while to find the windows I'm looking for.  Chrome and Firefox list the open windows chronologically which I find much easier.  The newest windows are at the bottom of the list. 
    Trying to migrate to Safari

    Try bug489729 (Disable detach and tear off tab): https://addons.mozilla.org/firefox/addon/12276

  • How to change the dictionary-managed taclespaces to locally managed

    Hi,
    how to change the dictionary-managed taclespaces to locally managed tablespaces in 9i?
    Many thanks.

    Hi
    execute DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_TO_LOCAL ('TABLESPACE_NAME');

  • How to change the default Path of Prompt Played by MicroApp

    Hi
    I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
    Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
    Please advice how we can customize the MicroApp Media path.
    regards
    Kapil Kumar

    Hi Kapil,
    Try this in your ICM script, define set variables i.e.
    set Media Server= ip address of media server
    set Locale = en-us
    set input Type = DTMF only
    set App Media Lib = " you new location i.e. test "
    So, the application path will be
    http://media server ip address/en-us/test
    hope this helps.
    Cheers

  • How to change the Busy tone of WIC-2FXS in 2610

    My local FXS card is connected to my office PBX CO port. When a far end caller disconnects a VoIP session, my local FXS generates a very strange tone to my PBX so that the AA of my PBX cannot detect such busy tone and hence cannot drop the call. The strange tone is very different from the normal busy tone from PSTN.
    Anyone can teach me how to change the FXS busy tone when a VoIP session is disconnected.
    Thanks.

    Configure the voice port for the local territory's call progress tone setting. The call progress tone setting determines the settings for dialtone, busytone, and ringback tone.
    The default for this command is northamerica. For a list of supported countries
    router(config-voiceport)# cptone country

  • How to change the Hello Portlet in Jetspeed2 Demo

    hi ppl,
    I am having a big problem..
    I can't change the portlet title, hello portlet, in the jetspeed 2 demo.
    The strange things is that i am able to change the title of the pickANumber portlet.
    @ Portlet.xml
    <portlet id="PickANumberPortlet">
    <init-param>
    <name>ViewPage</name>
    <value>/WEB-INF/demo/simple/PickANumber.jsp</value>
    </init-param>
    <init-param>
    <name>HelpPage</name>
    <value>/WEB-INF/demo/simple/PickANumberHelp.jsp</value>
    </init-param>
    <init-param>
    <name>EditPage</name>
    <value>/WEB-INF/demo/simple/PickANumberEdit.jsp</value>
    </init-param>
    <portlet-name>PickANumberPortlet</portlet-name>
    <display-name>Pick a number game</display-name>
    <portlet-class>org.apache.jetspeed.demo.simple.PickANumberPortlet</portlet-class>
    <expiration-cache>-1</expiration-cache>
    <supports>
    <mime-type>text/html</mime-type>
    <portlet-mode>VIEW</portlet-mode>
    <portlet-mode>HELP</portlet-mode>
    <portlet-mode>EDIT</portlet-mode>
    </supports>
    <supported-locale>en</supported-locale>
    <supported-locale>fr</supported-locale>
    <supported-locale>ja</supported-locale>
    <resource-bundle>org.apache.jetspeed.demo.simple.resources.PickANumberResources</resource-bundle>
    <portlet-info>
    <title>Change TITLE</title>
    </portlet-info>
    <portlet-preferences>
    <preference>
    <name>TopRange</name>
    <value>100</value>
    </preference>
    </portlet-preferences>
    </portlet>
    See.. i just replace that data in the portel-info/title.. and it changes the title in the pickANumber portlet change..
    But strange! i can't do the same way for the hello portlet
    Can someone tell me how to change the title in the hello portlet...
    Pls help.. i am running out of time!

    The hello portlet uses the title string in property file, thus you may need to modify the file "demo\WEB-INF\classes\org\apache\jetspeed\portlet\helloworld\resources\HelloWorldResources_en.properties" to change its title.

  • How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.

    Dears ,,
    how to change the path that sysprep were copied to reference computer when i capture the image from reference.
    Should i modify some codes in LTIAPPLY.wsf? how to modify it?
    Thanks.

    Sysprep and capture has *Three* steps.
    1. Run sysprep on the local machine (easy).
    2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
    3. Capture the drive in an *offline* state from within WinPE.
    What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
    a 100MB partition.
    By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
    If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
    Keith Garner - keithga.wordpress.com

  • How to change the langage pack in the N958GB ?

    How to change the langage pack in the N958GB ?
    I bought this N95 8GB in greece and it has only greek/english
    How to put french/english ?

    You have taken the handset to a part of the world for which it was not intended.
    Your only option is to take the phone to a local Nokia Care Point, explain that you bought the phone in Greece and ask them to install a French language pack. They may charge you for this.
    Also note that your French language pack will be erased whenever you update the phone's firmware and possibly when you perform a reset as well.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to change the R3 materialcass in backend

    Hi,
    Can any one suggets me Its just a question of doubt how to change the R3MATCLASS in backend.as when I try to change the description system gives me an error saying that, change in the backend.?
    Best Regards,
    Sairam

    Hi Sai Ram,
    I think if you replicated your materials from the backend, it doesnot make sense to have different descriptions in your Local SRM and R/3 system. Hence, it is a good practice to edit the description in your R/3 system and if your delta load is set up, this shall come into the SRM system via your OLTP.
    Also, the description change in SRM is only possible for the local categories.
    Hope this info helps !
    Pls assign points if answer is helpfull !
    Sundeep

  • How to change the instance_name

    Hi guys,
    I am a member of OTN, and I am interested in installing Oracle DB and OAS9i on Linux RedHat platform, and I hope it can be used for my company in the future, so I just download the OAS9i for Linux testing use first, and I follow the Installation guide to setup, but I got a problem - How to synchronize the origin database name with its SID by changing the origin database name? As my db_name and instance_name are different, and I want the instance_name is the same as db_name, is there anybody can do me a favor, and tell me how to change the instance_name and let it the same as db_name?
    Thanks in advance for any kindly suggestion and help.
    Best Regards!
    Frank

    Sarwar, I don't quite follow you, after I enter Net8 assistant, I just can find there are three items listed under Local-Service naming: for example,
    oracle1.mydomain
    inst1_http.mydomain
    extproc_connection_data.mydomain
    as I had already reinstalled Oracle database once, the previous instance_name is ex:oracle, and after uninstall and reinstall the
    database with SID ex:oracle1, but maybe something I didn't remove
    completely, now I found my db_name and instance_name are diff,
    now my db_name is oracle, but my instance_name is oracle1, and
    I want them to be the same, but I don't know how to change
    the instance_name to the same as db_name, so Sarwar, as I listed
    above, how can I choose different service name and let my database instance_name the same as db_name?
    Or anybody know the detained instructions to remove oracle database completely? I would like to remove the database again
    and reinstall it if I can't fix the problem.
    Help! Is there anybody can help me?
    Thanks in advance!

Maybe you are looking for