How to change the Max limit in the Ring

 Hi all,  
 I am try to use a Ring to set up 4 different of Freq form 18Hhz to 20Ghz but the ring Max limit only 65535. How could I change the max limit? Or any way we could set up 4 diffirence Freq number for user select any one they want to use. 
Thank you
Solved!
Go to Solution.

you could use a case structure and wire your ring control to it and then send the frequency you from the case structure
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome

Similar Messages

  • How to increase the the max limit column in pivot view in BIEE 11G?

    Hi Experts,
    How to increase the the max limit column in pivot view in BIEE 11G?
    When the number of column exceed 256 in pivot view, it will generate the following error message as below:
    Exceeded configured maximum number of allowed output prompts, sections, rows, or columns.
    Error Details
    Error Codes: IRVLJWTA:OI2DL65P
    Location: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    SQL Issued: 13678~vid1ptgt0v5ubh39gesnauuhl6
    For example:
    ----------------Day
    Country-----20120101---20120102---..........20121231
    China--------10000---------20000----......

    Try increasing the Max Rows in Instanceconfig.xml
    Path:-Middleware\instances\instance1\bifoundation\OracleBIPresentationServices\instanceconfig.xml
    <ServerInstance>
    <Views>
    <Pivot>
    <MaxVisibleColumns>300</MaxVisibleColumns>
    <MaxVisiblePages>1000</MaxVisiblePages>
    <MaxVisibleRows>500</MaxVisibleRows>
    <MaxVisibleSections>25</MaxVisibleSections>
    <DefaultRowsDisplayed>30</DefaultRowsDisplayed>
    </Pivot>
    </Views>
    </ServerInstance>
    Try adding this in the config file and restart the services.
    Mark as correct if it is helpful.
    Thanks.

  • How to change the max number of the user session?

    Hello,
      The max number of the user session of my system is 6,I want to change it,how should I do?

    Hi Begue,
    This can be done by changing the value of profile paramter rdisp/max_alt_modes. Currently its value in your system must have been set to 6. You can check the value through transaction RZ11. To change it use transaction RZ10.
    For knowing the details of changing values in RZ11 please visit :
    http://help.sap.com/saphelp_47x200/helpdata/en/c4/3a6247505211d189550000e829fbbd/frameset.htm
    After making the changes please restart SAP.
    Please award points if the issue got solved.
    With Regards.
    Ruchit.

  • How to change datasource name based on the partition in configplan

    Hi
    Can any one please give me some solutions regarding how to change datasource name based on the partition in
    configplan.
    can't we do this in configuration plan?

    If you want to change template based on parameter. you have to use below syntax
    v_layout boolean
    V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
    ,template_code => 'HUBAPAPN' -- template name
    ,template_language => 'en'
    ,template_territory => '00'
    ,output_format => 'PDF');
    Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
    Thanks
    Kamalakar

  • Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi Ivanlaiwh,
    I have been doing the modification regarding your account.
    You should now be able to proceed to a new purchase.
    Thanks.
    Arnaud.

  • How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

    How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

  • How do I set a limit to the number of registrants to an event form?

    How do I set a limit to the number of registrants filling out an event form?

    PLEASE add this feature. as far as I can tell there are no option out there that serve this need. FormAssembly, EmailMeForm, or FormsCentral. Think of how many customers would use this. Imagine a t-shirt company that pre-prints inventory, wouldn't they want to limit how many forms could be submitted that want a size L shirt? My business is participant based, like the evnt question above we need to limit the number of participants. Of course I could program my own solution, but then I would miss out on all the other cool FormsCentral features. Any chance this could be added right away if I sponsored it as a custom development?

  • Bad practice to always fill recordable media dvd etcetera to the max limit?

    I burn a lot of dvd, bluray etcetera.
    I see that for example Blu Ray Bd-R has a max capacity of 23.31 GB (single layer).
    I have heard that you are not suppose to fill it to the max limit due to quality of burning for long time storage, but cannot understand why eventually.
    Any good guidelines for this?

    Yes, I agree, the chance of bad sectors, or the need for an extra metafile block can means filling the disc is undesirable, especially if just adding plain data. 
    Here's what I have to say about CDs*:
    http://www.macmaps.com/cdrfailure.html

  • What is the temperature limit of the finger to work on iPhone touchscreen? I'm asking this, because I've noticed that when my finger gets too warm (about 104oF) the screen of my iPhone 5 doesn't recognize its touch. Thank you.

    What is the temperature limit of the finger to work on iPhone touchscreen? I'm asking this, because I've noticed that when my finger gets too warm (about 104oF) the screen of my iPhone 5 doesn't recognize its touch. Thank you.

    I understood. Emphasizing that this is still a guess, when you touch the screen it compares your fingerprint at that time to the one you originally recorded. The fact that the finger is warmer may have a small effect on the fingerprint making it appear different than the original colder one. Temperature differences cause things to expand and contract and that may be having an effect on the comparison. You could try recording a fingerprint after doing what you are doing and then see if it will be recognized when you do the same thing to log into the phone. I know that prior to iOS 7.1 for a few minutes after I would wash my hands the phone had difficulty recognizing the fingerprint. Don't know if it was temperature or moisture that caused the temporary change induced by the hand washing. That improved with version 7.1 I think.

  • From the RAM limit to the CORE limit...

    I was thinking that Bidule (Plogue) is a good way to expand RAM Logic limit, but at the end it definetely shrinks to to be a way to add 2 or max 3 instruments to Logic possibilities (because of Rewire one core limit). If I use an Ivory and an Omnisphere plug I already get the Rewire core meter of Logic going near the top
    (I have a 2x3 Intel Xeon Quad Core)
    So, from the RAM limit to the CORE limit.....
    And I think also that the hard criticised Spectrasonics Atmosphere and Trilogy plugins wrappers, now reveal very very useful for saving my Logic RAM expansion possibilities...
    And about Logic 9..nothing mentioned on 64 bit support....

    If file size is the biggest concern, once you've cleared out
    all items
    you don't need any longer, try:
    1. Doing a Save As, then a Save As again. Often, for whatever
    reason,
    this finally gets rid of old, unused objects.
    2. Create a new project and import the existing project's
    slides. This
    can have the same effect.
    In my experience, the first is better for reducing file sizes
    and the
    second is better for getting rid of any playback anomalies.
    Otherwise, a better approach for what you're doing, again in
    my
    experience, would be to cut up the audio outside of Captivate
    into one
    file per slide (using a tool like Audacity), import them all
    into the
    library, then add each individually. That's our standard
    process and
    we've yet to experience these huge, bloated CP files (knock,
    knock).
    Erik
    luke@nesc wrote:
    > I have been using Captivate to imbed an audio recording
    of a presentation into
    > the slides for said presentation. The audio is in the
    form of one large mp3
    > file. When adding the audio, I select the option to
    distribute over many files,
    > and line up all the slides to the correct part of the
    audio. If i need to edit
    > the slide times or audio (this happens frequently
    because captivate seems to be
    > rather buggy when splitting up the single audio track
    into one for each slide)
    > the resulting Captivate Project file rockets in file
    size. ....
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/group/macromedia.authorware

  • What is the max wattage of the X1 DVR?

    What is the max wattage of the X1 DVR? I'm trying to determine UPS size for my TV & X1 box.

    JerWin wrote:
    Great! Thanks.

  • Does anyone know the max. Amps the iMac draws?

    Does anyone know the max. Amps the iMac draws?

    does anyone?  sure probably.  All I know is what's on the tech specs page http://www.apple.com/imac/specs.html
    Electrical and Operating Requirements
    Line voltage: 100-240V AC
    Frequency: 50Hz to 60Hz, single phase
    Maximum continuous power: 205W (21.5-inch models); 310W (27-inch models)
    Operating temperature: 50° to 95° F (10° to 35° C)
    Storage temperature: -4° to 116° F (-20° to 47° C)
    Relative humidity: 5% to 95% noncondensing
    Maximum altitude: 10,000 feet
    Typical acoustical performance Sound pressure level (operator position): 18 dBA at idle4
    -mvimp

  • How can I increase the hard limit of the stack size?

    Hi,
    My process gives an error of segmentation fault (SIGSEGV) that is caused because the stack limit is reached. I have a doubt about how to increase the stack size. I have tried change it with "ulimit - hard" but this size is 65532kb, and is very low for my process. How can I increase the hard limit?
    Thanks.

    When last I checked, the kernel had a fixed stack size limit.
    Do you have the source code to this application? If so, [see this Tiger stack size article|http://homepage.mac.com/eric.c/hpc/contents/documentation/How%20to%20in crease%20the%20stack%20size%20on%20Mac%20OS%20X.pdf], and specifically have a look at the +ld -stack_size+ mechanism; rebuild the code with a bigger limit.
    Entirely FWIW, this question would be more typical over in the developer forums or maybe in the Unix forum if you don't have Apple developer access. Better audience for application development and for software-related questions over there.

  • How to get the max value in the query??

    Plant  calday(mm.dd.yyyy)       Soldout.Qty
    0001   01.01.2005               10
    0001   01.02.2005               20
    0001   01.03.2005               05
    0001   01.04.2005               16
    0001   01.05.2005               10
    0001   01.06.2005               14
        From the above values , how can i findout Max(Soldout.Qty)(i.e 20) for the above week...Suppose present aggregation = summation...How can i findout the value in the Query??don't want to do changes to design...

    Hi Bhanu,
      I tried the calculation results as...Maximum,..
      But that will pick the maximum value among the avialable values..like
    plant1 max 10
    plant2 max 20
    plant3 max 30
    then it will show as..
    plant1 max 30
    plant2 max 30
    ...like this...but my case is
    plant1 calday1 10
    plant1 calday2 05
    plan1  calday7 08
    plant2 calday1 10
    plant2 calday2 05
    plan2  calday7 20
    so for each set it need to bring the maximum value...

  • Generate new schdule lines in MMSA after the max limit I.e.9999 is reached

    Releases are not feeding into MMSA  since it has reached the max. schedule line. Now if i want to create new released in the same MMSA what i have to do.
                                 In other words i want to know how to generate new schedule lines in MMSA once they reached the max.i.e.9999.

    Hi,
    You cannot create new schedule lines after reaching the maximum limit. Please check which document type you are using PL or LPA. LPA is ment for release . Hope it works. Thanks.

Maybe you are looking for