How to change the max number of member display in Target Group

Dear Experts,
We are using 2007 CRM Marketing.
When I search and open a Target Group it displays me maximum of 100 entries of members over 11 pages. how do I increase or decrease the max number.
Appricate you help.
Thanks,
Shabbir Hussain

Hi,
you can set the number of members that will be displayed in target group.
Go to any profile group -> open the graphical modelling -> open settings.
Here you can ajust the displayed number of members in a targetgroup.
These settings are user-dependent and saved in table CRMD_MKTTG_PERS.
Regards,
Claudia

Similar Messages

  • How to change the max number of the user session?

    Hello,
      The max number of the user session of my system is 6,I want to change it,how should I do?

    Hi Begue,
    This can be done by changing the value of profile paramter rdisp/max_alt_modes. Currently its value in your system must have been set to 6. You can check the value through transaction RZ11. To change it use transaction RZ10.
    For knowing the details of changing values in RZ11 please visit :
    http://help.sap.com/saphelp_47x200/helpdata/en/c4/3a6247505211d189550000e829fbbd/frameset.htm
    After making the changes please restart SAP.
    Please award points if the issue got solved.
    With Regards.
    Ruchit.

  • How to change the maximum number of process per user in BW ?

    Hi,
    Do you know how to change the maximum number of process allowed per user ?
    With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
    In fact, my production environment reach always the max number of process available in SM50...
    Thanks a lot

    Hi,
    A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from  a list of N worl proceesor which has been taken the work.
    Correct if I am wrong.
    Regards
    Syed.

  • How to change the port number for deployment in JAVA Studio Enterprise 8?

    Hi!
    Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
    Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
    Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

    http://docs.sun.com/source/819-0080/install.html
    In the Admin Configuration page (or at the command line), enter the following:
    Admin User Name�Name of the user who administers the server
    Password�Admin user�s password to access the Admin Server (8-character minimum)
    Admin Port�Administration port number for initial server instance
    HTTP Port�Port number to access the default server instance
    HTTPS Port�Secure port number to access the default server instance

  • How to change the Max limit in the Ring

     Hi all,  
     I am try to use a Ring to set up 4 different of Freq form 18Hhz to 20Ghz but the ring Max limit only 65535. How could I change the max limit? Or any way we could set up 4 diffirence Freq number for user select any one they want to use. 
    Thank you
    Solved!
    Go to Solution.

    you could use a case structure and wire your ring control to it and then send the frequency you from the case structure
    Harold Timmis
    [email protected]
    Orlando,Fl
    *Kudos always welcome

  • ML81N: How to change the external number to mandatory?

    Hi All,
    Is it possible to change the External number field  in transaction ML81N from optional to mandatory through configuration settings. Please provide me the path if you have any idea.
    Edited by: Julius Bussche on Oct 30, 2008 11:12 AM

    Hi,
    It can be done using t-code SHD0.
    here give the transaction name- -ML81N
    in the tab transaction variant-----give a name say --yML81N
    then press create.....and go to your required screen....
    and there in the field External number  tick mark the check-box required
    save and exit.
    then in the tab standard variants activate the transaction variant created.
    Regards
    Debarshi.

  • How to change the sequence number in the test packages?

    Hello,
    I need to change the sequence number in the test packages. Currently I use "move test case." However you can only move one item at a time.
    There is another option to make this change?
    Best regards,
    Elisabete

    Hi Elisabete,
    Sorry, I've to acknowledge the reply from Fabricius.
    That's poor in release 7.0. A former version provided a solution where it was possible to move a testcase even over pages at once.  May be SAP changed this functionality because of other problems caused by the former solution.
    Therefore I am looking for a business blueprint structure meeting the logical and operational process for little need of changes in sequences.  And I create E2E-scenarios / E2E-processes as an additional structure in a project to have an easier approach in the Test Workbench.  An other option is to divide test packages into smaller ones.
    I hope we can look foreward to a better and more comfortable solution in release 7.1.
    Best regards,
    Adelbert

  • Changing the default number of rows displayed in a interactive report

    Hi,
    I have a sql query based interactive report but i cant change the default number of pages i.e 15.
    is there any way to change the number of rows displayed.
    Thank you,
    rakesh

    Hi,
    That was very useful document that you shared, yes that is correct we can so it this way but there is another way doing it where in if you go to the report attribute section and in that there is Layout and Pagination and under
    that you can fix the number of rows, and over there we can also accept values from page item such as if the page item value changes the number of rows displayed in the report changes dynamically.
    In my report i get only pagination but not a option for layout.
    Any help will be appreciated.
    And also where i can get the links to the similar document that you have shared ?
    TY
    rakesh
    Edited by: rakesh119 on Apr 30, 2013 12:10 PM

  • How to change the text of item's displaying in the folowing ALV.

    Hi Experts,
    I want to change the text of item's displaying in the folowing ALV.
    Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
    Here one small ALV grid is appearing.
    Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
    Can any one throw some light in the issue.
    Thanks&Regards,
    Anversha

    Hi Anversha ,
    i think you need to use Enhancement point for it.
    check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
    i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
    regards
    Prabhu

  • How to change the phone number in icloud

    I change my phone number and i nees to change the number in icloud and i don't know how i do this

    Hello there, Stefan.
    The following Knowledge Base article offers up some great steps to review for setup and functionality of two-step verification for your Apple ID:
    Frequently asked questions about two-step verification for Apple ID
    http://support.apple.com/kb/ht5570
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How to change the destination number of my online ...

    I want to change the number that my online number forwards to.  How do I do that?  I see instructions for those who are using Skype for Business, but I just have a single account with a single line.   How do I change the number that rings when someone dials my skype-to-go number?

    Hi,
    A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from  a list of N worl proceesor which has been taken the work.
    Correct if I am wrong.
    Regards
    Syed.

  • How to change the thread number for user account

    I remember that for each user account, we can limit the maximum thread number it can create for a user process. But how to change this number?
    Thanks,
    Iris

    Hi ,
    I do not think that there is a way to control the number of "threads per user".
    Are you referring to "thread id" ? Please elaborate on your requirement.
    You may want to take a look at the complete list of process sizing tunables
    at:
    http://docs.sun.com/ab2/coll.707.1/SOLTUNEPARAMREF/@Ab2PageView/idmatch(CHAPTER2-4)?Ab2Lang=C&Ab2Enc=iso-8859-1#CHAPTER2-4
    The link can also be accessed as:
    http://docs.sun.com
    Collection Titles
    Solaris Tunable Parameters Collection
    Solaris Tunable Parameters Reference Manual HTH
    Gopinath.
    Developer Technical Support
    Sun Microsystems Inc

  • How to change the elements number in Number To Boolean Array Function VI

    Hi, I'm working on using the DAQ digital output to control the digital input of a DAC, and I used the Number To Boolean Array Function. VI to convert the number to a Boolean array. The maximum number should be 4096, therefore it should consist of 12 elements.
    For the description of the VI, it says Boolean array returns an array of 8, 16, 32, or 64 elements, depending on the number of bits in the integer. Therefore, I change the number of the channels in task to 16, but it still doesn't work. Any suggesitions are greatly appreciated.
    Thanks!
    Possible reason(s):
    Write cannot be performed, because the number of channels in the data does not match the number of channels in the task.
    When writing, supply data for all channels in the task. Alternatively, modify the task to contain the same number of channels as the data written.
    Number of Channels in Task: 12
    Number of Channels in Data: 32
    Task Name: _unnamedTask<1B>
    Solved!
    Go to Solution.
    Attachments:
    DAC test.vi ‏47 KB

    Once you have the boolean array, you can resize it using array tools. For example you can use "reshape array" with a lenght of 12 to trim the array to 12 booleans elements (you can also use array subset).
    LabVIEW Champion . Do more with less code and in less time .

  • How to change the order of parent member on data forms

    Hi,
    Is there any way to show parent on top of its children in data form row level?
    By default data form display members like this:
    __Child 1
    __Child 2
    +Parent
    Instead of above i want this sequence:
    +Parent
    __Child 1
    __Child 2

    Have a read of
    Can we change the display order of member set functions like @Idescendant?
    Re: the order of member showing in dataform
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to change the port number

    Hi all,
    Weblogic Application server by default uses port 7001
    for access to console and enterprise manager
    can any one tell how to chage it.
    Please help me to resolve this..
    Regards
    cnu

    Hi,
    Please login to Admin Console "http://localhost:7001/console" then ...
    press Lock And Edit Button
    Now From Left panel Environment--->Servers--->AdminServer--->Configuration (TAB)--->ListenPort
    Change the value of Text Field to some other Port and then Restart your Server
    Thanks
    Jay SenSharma
    http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Maybe you are looking for

  • Error message with variable

    Is it possible to include a variable in message box? For example, i have a variable v_name and i want to include it in my error message. MESSAGE i001.

  • Need help with ID CS3

    I need help/tutor with layout/design/construction for a small publication. Looking for someone who knows ID3 and Word. If you know Illustrator & PS, all the better. Email - [email protected] with hourly rate. Most everything can be done via email/pho

  • CUPS Linux-to-Linux printing problems [SOLVED]

    I'm having quite a hard time getting my shared Brother HL-2040 to be recognized by another Arch workstation on my LAN. Solved: Upon inspecting the config further, I decided to try adding the remote user's account to the local machine and that did the

  • Howto clear datagrid contents?

    Is there an easy way to simply clear all the contents that were previously displayed in a datagrid? I have a datagrid, when a user logs in, they can hit refresh and it will populate the datagrid. But I would like to clear the contents when the user l

  • Comment and Markup toolbar doesn´t show

    Hi, I am using a third party application which uses Adobe Reader 9.2 Pro. Actually the application is hosted on 2 Citrix servers that points to the application server. Scenario: When hitting "Comment" option on the application, it launches an IE expl