How to change the Maxinum of item in a iview
i use KM to display news, but it only can display 5 item,how to change it to 10?
Hi,
which CollectionRenderer do you use?
You should be able to configure the displayed columns and rows in "System Administration" > "System Configuration" > "Knowledge Management" > "Content Management" > "User Interface" > "Settings" > e.g. "Collection Grid Renderer Settings" > "News Collection Renderer".
Also have a look at the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/87/3d48475ee8bd448c4031aa98d90524/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/94/29df3d0eb8af5ee10000000a114084/frameset.htm
Regards, Alex
Similar Messages
-
How to change the text of item's displaying in the folowing ALV.
Hi Experts,
I want to change the text of item's displaying in the folowing ALV.
Go to ME23N->Click 'Messages'->Click 'Further Data' -> Click 'Displ.Originals'.
Here one small ALV grid is appearing.
Currently it is showing same name's under the 'Title' column of that ALV. My requirement is to change the text coming under the column 'Title' in that display.
Can any one throw some light in the issue.
Thanks&Regards,
AnvershaHi Anversha ,
i think you need to use Enhancement point for it.
check the program DV70AF0A-->ARCHIV_ANZEIGE(Subtoutine).
i had similar kind of requirement ,while attaching the supporting documents to FI document , i need to update title field with File name , so i used EP and BADI to do so.
regards
Prabhu -
How to change the numbers of items in a ring control in run time ?
Hi !
I would like change the numbers of items in a ring control in run time, but I can´t.
Thanks.Hello blaze,
did you try the "Strings And Values []" property of the ring?
LabView7.1 help says:
Array of clusters containing the strings from which you can select in the ring control
and the numeric values for each item. Use the Strings [] property if you do not need to
assign specific numeric values to each item.
Best regards,
GerdW
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Here is the problem I want to change one item height in multiple records block..
I tried to do the following
set_item_instance_property(:system.mouse_item,:system.current_record,height,50);
But this didn't work as the property for height couldn't be used with this built in..
Can any one tell me any other suggestion to move around
Thanks and best regaresIf you just have two sizes to display - e.g. normally the item is 1 line high but in the current item you want to show more information and want to make it say 2 lines high, then you can use a Mirror item to do this.
Create another item in the block - set the Synchronize With Item property to the base item you want to "Resize".
Set the Records Displayed property to 1 for this extra field.
Put this field on a stacked canvas that is just big enough to hold it.
The in your When-New-Record Instance trigger you can pop the stacked canvas up over the normal version of the field.
That should do the trick. -
How to change the order of item records?
Hello,
IDOC - File
Required Structure:
Header
item1
child1
item2
child2
item3
child3
File now generating in the following manner:
Header
item1
item2
item3
child1
child2
child3
what changes do I need to make in order to get the required strucutre in the file?
so that for each item, the child gets displayed?
Nikhil.Target structure:
+MT_TARGET
++TARGET
+++Header
+++Orderitm
+++Ordchild
The Orderitm and Ordchild get the data from an IDOC segment named ZE1XYZ
so I have mapped Orderitm and Ordchild to ZE1XYZ.
thus, how many no of times, that ZE1XYZ repeat, im getting those many item and child records but they are being displayed in the following order.
+MT_TARGET
++TARGET
+++Header
+++Orderitm
+++Orderitm
+++Orderitm
+++Ordchild
+++Ordchild
+++Ordchild
===
the desired output should be:
+MT_TARGET
++TARGET
+++Header
+++Orderitm
+++Ordchild
+++Orderitm
+++Ordchild
+++Orderitm
+++Ordchild
Nikhil. -
How to change the number of items displayed on the screen based on user input
I need to place a number of input clusters on the user's screen based on the number of input types he will have. Is there an easy way to do this? (Say I have 3 different electrodes, I want to be able to add information for each then take this information and add it to a database, this case adding three new record sets to the database. If I only have one electrode though, I only want one cluster on the screen and only one recordset will be added to the database)
Message Edited by Vitamin on 01-11-2007 12:36 PMPlace your clusters in a 1D array and create a property node for the array. You can use the Number of Rows property to control how many elements are shown. Wire the array into a for loop to index it.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world! -
Change the Purchase Order : Item - Conditions value
Hi,
How to change the Purchase Order : Item - Conditions value.
In my PO, Item conditions shows the SKTO - Cash Discount value is 0. I want to change the Discount value 10.
How can i change it??Hi,
Goto the Transaction code MN05 and give the CONDITION TYPE SKTO and change the value
MN05 is the Transaction code for Purchase order condition types.
Please check and revert back if you need more details.
regards,
santosh -
How can I change the name of item in TableViewController iOS
How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
[super viewDidLoad];
This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
self.tableView.allowsMultipleSelectionDuringEditing = YES;
// populate the data array with some example objects
self.dataArray = [NSMutableArray new];
NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
[self.dataArray addObject:itemName];
// make our view consistent
[self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
// Update the delete button's title based on how many items are selected.
[self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
// Update the delete button's title based on how many items are selected.
[self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
// Configure a cell to show the corresponding string from the array.
static NSString *kCellID = @"cellID";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
[self.tableView setEditing:YES animated:YES];
[self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
[self.tableView setEditing:NO animated:YES];
[self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
// The user tapped one of the OK/Cancel buttons.
if (buttonIndex == 0)
// Delete what the user selected.
NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
BOOL deleteSpecificRows = selectedRows.count > 0;
if (deleteSpecificRows)
// Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
for (NSIndexPath *selectionIndex in selectedRows)
[indicesOfItemsToDelete addIndex:selectionIndex.row];
// Delete the objects from our data model.
[self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
// Tell the tableView that we deleted the objects
[self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
else
// Delete everything, delete the objects from our data model.
[self.dataArray removeAllObjects];
// Tell the tableView that we deleted the objects.
// Because we are deleting all the rows, just reload the current table section
[self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
// Exit editing mode after the deletion.
[self.tableView setEditing:NO animated:YES];
[self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
// Open a dialog with just an OK button.
NSString *actionTitle;
if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
else
actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
delegate:self
cancelButtonTitle:cancelTitle
destructiveButtonTitle:okTitle
otherButtonTitles:nil];
actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
// Show from our table view (pops up in the middle of the table).
[actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
[self.dataArray addObject:@"New Movie"];
// Tell the tableView about the item that was added.
NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
[self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
withRowAnimation:UITableViewRowAnimationAutomatic];
// Tell the tableView we have finished adding or removing items.
[self.tableView endUpdates];
// Scroll the tableView so the new item is visible
[self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
atScrollPosition:UITableViewScrollPositionBottom
animated:YES];
// Update the buttons if we need to.
[self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
if (self.tableView.editing)
// Show the option to cancel the edit.
self.navigationItem.rightBarButtonItem = self.cancelButton;
[self updateDeleteButtonTitle];
// Show the delete button.
self.navigationItem.leftBarButtonItem = self.deleteButton;
else
// Not in editing mode.
self.navigationItem.leftBarButtonItem = self.addButton;
// Show the edit button, but disable the edit button if there's nothing to edit.
if (self.dataArray.count > 0)
self.editButton.enabled = YES;
else
self.editButton.enabled = NO;
self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
// Update the delete button's title, based on how many items are selected
NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
BOOL noItemsAreSelected = selectedRows.count == 0;
if (allItemsAreSelected || noItemsAreSelected)
self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
else
NSString *titleFormatString =
NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@endHey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G. -
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony JoyHi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet -
How to change the "name of column" property of an text item in runtime?
How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero -
How to change the posting date at the line item level in a sales order
how to change the posting date at the line item level in a sales order
Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh -
How to change the line item storage location during the sales order creatio
How to change the line item storage location during the sales order creatio
Hi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel -
How to change the currency in Billing plan in SO line item
Hi Experts
Pls help in following scenario.
Company Code Currency: HKD
Sales Document Currency: INR(Indian Rupees)
Item Pricing Condition Currency(PR00): 100 USD
Item Netvalue: 4800INR(System caluculated as per exchange rate type M)
Document Netvalue: INR 4800
The sales document item is linked to a billing plan.
I wanted to maintain 100USD in the billing plan.
When i goto Sales->item-->Billing Plan, The currency in billing plan screen is document currency and is greyed out.
How to change the Currency in Billing plan (to Item Condition currency) and maintain the Billing value in USD?
Pls help.
Regds
HariCurrency change we wanted to do is not during Invoicing.
In billing plan itself we want to change the currency setup the billing value in item condition currency.
Any one, pls help. -
How to change the product category on the item level of a Sales order
1) For each product there are Basic Product Hierarchy and Sales Product
Hierarchy.
2) when creating sales order, system gets the Sales Product Hierarchy
on the Item level with the default logic.
So our question is: how to change the logic to let system get the Basic
Product Hierarchy on the Item Level.Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh -
How to change the selection background color of the selected item in the popup menu of the choice box ?
By defaut, the selection background color likes "blue", but if I want it to be "yellow" for example, how should I do ?
ThanksThe id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
Example:
import java.util.ArrayList;
import java.util.List;
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.ChoiceBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class ChoiceBoxTest extends Application {
@Override
public void start(Stage primaryStage) throws Exception {
primaryStage.setTitle("Example 2");
final ChoiceBox<String> choiceBox = new ChoiceBox<>();
List<String> tempResult = new ArrayList<String>();
for (int i = 0; i < 10; i++) {
tempResult.add("Item " + i);
choiceBox.getItems().setAll(tempResult);
VBox root = new VBox();
root.getChildren().add(choiceBox);
final Scene scene = new Scene(root, 300, 250);
scene.getStylesheets().add("choiceBox.css");
primaryStage.setScene(scene);
primaryStage.show();
public static void main(String[] args) {
launch(args);
choiceBox.css:
@CHARSET "UTF-8";
#choice-box-menu-item:focused {
-fx-background-color: yellow ;
#choice-box-menu-item .label {
-fx-text-fill: black ;
Message was edited by: James_D
Maybe you are looking for
-
Hi forum!! In the ERP order we assign a item of a order to a WBS element and we need to see that WBS element in CRM but that field does not appear in the CRM order!! Because of that I think about creating an ERP Order in CRM Order because the WBS ele
-
How to crate a dynamic size array, collection
Hi, Can someone point me to some tutorial on how to create a dynamic size array. Actually I have multiple cursors and on different tables and want to loop through each cursor and get some values from each cursor and put it in an array. But don't know
-
Magic trackpad not recognized by MacBook air
Macbook air bluetooth does not recognize Magic Trackpad when searching for bluetooth pairings. Printed instructions followed.Can I download something that remedies this, or is it a limitation of the MacBOok Air itself?
-
Outsourcing of Benefits to 3rd Party
Hello... we are currently using the SAP HR Benefits module, but will soon be outsourcing our HR Benefits administration to a 3rd party. The 3rd party will be sending us the benefits deductions via an interface, so that we may incorporate them into
-
Internet Explorer 7.0 not recognizing mimetype/msexcel
I am using 1. Forms [32 Bit] Version 10.1.2.0.2 2. Internet Explorer Version 7.0.5730.11 3. Microsoft Excel Version 11.0 4. JInitiator 1.3.1.21 Forms calls a report using web.show_document(url + server (https:\\....) + &mimetype=applicatio