How to change the MM Period

Hi Dear
I wanna change the posting period from 02 - 2010 to 12 - 2009 means back date, Please help how it has to be done.
i had tried in MMPV, MMRV, but no result. Give calender related error.
Thanks in Advance
Rakesh Paal

Rakesh Paal,
If you want to open previous period for reversal entry or additional entry
The following are steps for Opening previous period in MM :
1. Go to TCode SU01 (see OSS NOTES 487381)
2. Choose "change" tab with your loging Name
3. Choose "Parameter" tab
give Parameters MMPI_READ_NOTE with date format as YYYYMMDD
(say today 20071201)
4. SAVE.
5. Go to T-code MMPI
6. open the old periods which you want to post into,
Note :
the period opening will be valid for only for the particular day only.
7. Complete the posting you want to reverse or add
8. Go to MMPV to close the periods.
These steps first do it dev or quality then proceed furthere .

Similar Messages

  • How to change the retention period of os watcher log,

    How to change the retention period of os watcher log, by default it is 7 days. but in our exadata env. automatically oswatcher logs are deleted , so i want to check the retention period.
    Regards,
    Ani

    Hi Ani,
    Go to :- /opt/oracle.cellos/validations/init.d/oswatcher
    Open the file "oswatcher" file.check for the line "/startOSW.sh X Y Z". Where X is the snapshot interval
    make the change and you are done
    Regards,
    Sunil Bhola

  • How to change the posting periods

    HI,
    could anyone tell me that how to change the posting periods in SD module
    regards,
    chary

    Welcome to the forum
    What do you mean by this and where to change ??  Please be clear in your question.  Also before posting, please make a search in the forum
    [Forum Search |http://forums.sdn.sap.com/search!default.jspa?objID=f246]
    thanks
    G Lakshmipathi

  • How to Change the Validity period

    Hi All,
    Could any one please explain how to change the validity period of SAP as when i am trying to post the PO with a delivery date in year 2011 it is not allowing me more than 2010 year. When i checked in Calender Maintenance the last entry in it is 2010. When i am trying to change the validity of the Indian settings it is not allowing me to change the year from 2010 to 2012 or any other.
    regards
    PSNG

    Hi,
    Just check "FOPC_CONSIST_CHECK" T-Code .
    Acthually this is for "Consistency Check on Validity Period"
    I am not very sure weather change option is there or not.
    Thanks
    Mayank

  • How to change the Validility period of the cost element

    Hi All,
    how to change the validity period of the cost element. In tranc code Ka02 only the text is allowed to change but i want to change the validity period of the cost element.
    best Regards
    stephen

    Hi All,
    Thanks for your response...........
    My  concern is, i have a document posted to 43100 GL Expense acct, which is also defined as cost element, GL field status G004(cost accts). But when the original document is posted no is no assignment of any cost object.
    But i have to reverse the document and when i use FB08, the reversal is popping up with error " Assignment of CO object is neccesaary " Assign the cost center.
    Is there any way we can update the cost center for posted docuemnt? if so how? and can i make the cost element invalid for previous month so that it will not ask for cost object and change the field status of the GL from g004 to G001 only for reversal and set it back after posting is done.
    Appreciate ur feedback and suitab;le points are rewarded with points.
    best

  • How to change the current period in material master

    hi everybody,
    as i have installed sap 4.7 ides version on my home pc for practice , but hwenver i am creating the new material  master in the system , i observe that in accounting1 tab the current period is 12 2002 , how should i change the current posting period so that i can start the transaction in current uear 2009 and then later i can work in 2010 ....
    i have tried  the transaction mmrv, mmpv, mmpi through some resources but i didnt know how to do the settings in the system in IMG (SPRO) kindly help me through , i have wasted lot of time in this..
    i hope MM team will help me out of this...
    AMIT BATHLA

    Hi,
    Check in OMSY Transaction that, Which current month and year is having your comapny code.
    and go to T.Code MMPV
    enter Next Month of that cureent period and Year
    and Execute. You find the message that your current period has changed.
    Do the same process month by month till reaches to current period and year.
    Let me know if you have further queries.
    Padma.

  • How to change the posting period !

    Hello everyone
    I get the problem with posting period. I ready open the posting period for 2014.  The posting periods should be set per month and have erroneously been defined as per year.
    I ready follow the guide, but it is only successful in my test of SAP and it is not working in our company SAP system. I can not restrict the curent posting date range to 30.04.2014 such as my picture below: Pleas help me. Thanks

    Hi Mr Son
    Nice to meet you. I read the guide about this problem and it said that we can change if we had postings in this period. And I try it in test of my SAP company and it is ok. but when i apply in my SAP company, it is not working, i don't know why. I am only normal accountant, and i don't know the user and pass to access to your link. if you are in Vietnam now, how i can contact with you? do you have any email or phone number or skype. Please help me solve this problem.
    Please check this file
    Business One in Action – How to Correct Posting Periods?
    And this is my result in testing SAP
    http://scn.sap.com/servlet/JiveServlet/showImage/2-14962466-431165/u2.png

  • How to change the field 'Current Planning Period' in xRPM portal?

    Hello All,
    In xRPM portal, under portfolio management --> financial planning, we have a field 'Current Planning Period'.
    Can anybody tell how to change the values of this field for all the projects/items at once?
    Also, when I am trying to change for individual projects. its opening the F4 help but not  selecting the date on which I double click.
    Thanks
    Niti.

    No, you cannot add another vPC peer-keepalive configuration.
    Taking down vPC peer-keepalive will not affect your vPC peer-link and vPC operation. It will be a problem if and only if vPC peer-link went down after the peer-keepalive is down first, this will cause dual active.
    Regards,
    jerry

  • Urgent:How do i change the validity period of cost element !!!!!!!!

    How do i change the validity period of cost element like:
    From 03/01/2008 to 01/01/9999
    To 01/01/2000 to 01/01/9999
    Please help me.I will assign you points.Thanks in advance.

    hi,
    pls go to t.code ka02 and select that particular cost element and go to menu bar and select edit -analysis period and select other analysis period there we can change
    if it is useful to you pls assign the points
    Thanks & Regards
    phaneendra

  • How to reverse the closing period document.

    Hi
    The entry can be reverse Only in current period
    You are trying the reverse the entrie in close period which is not possible .. how to reverse the closing period document.
    Thank you

    Use t code FB02. Enter required parameters and press enter. From the menu slect Extras - Document header. This will take you to next screen. In this screen from the menu select GoTo Document Header. Change the reversal date and save.
    Then reverse the document using normal process. The document will get reversed on the new date entered.
    Hope this helps. If useful, please reward points.
    Regards
    Rakesh Pawaskar

  • How to get the split period wage type amount in payslip?

    How to get the split period wage type amount in payslip?
    Payroll period for 01.01.09 to 31.01.09.
    1.     Employee is active from 1.1.09 to 10.01.09
    2.     Employee is inactive from 11.01.09 to 20.01.09
    3.     Employee is again active from 21.01.09 to 31.01.09
    In Result Table three split periods are created.
    From 01.01.09 to 10.01.09 u2018Basic Salaryu2019 Wtype  1101 amt is 20.00
    From 11.01.09 to 20.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 00.00
    From 21.01.09 to 31.01.09 u2018Basic Salaryu2019 Wtype 1101 amt is 10.00
    My requirement is to print only the last split period in payslip from 21.01.09 to 31.01.09. May you please help me in this regard.
    Thanks in advance
    Regards,
    Rajesh.

    Hi
    Try to read the below:
    WPBPC : Distribute Lump Sum Wage Elements to WPBP Periods
      Object
        Operation
      Use
        Operation WPBPC distributes the amount of the current wage type to the
        active WPBP periods in the payroll period.
      Input
        The current wage type in the header entry of table OT is used as input
        for this operation.
      Procedure
        Within payroll, wage types are assigned to a fixed WPBP period by
        infotype 0014 Recurring Payments/Deductions, for example. However, you
        may want to distribute this payment to all active WPBP periods, which is
        what would happen if the wage type were entered in basic pay. Therefore,
        various specifications exist for parameter S:
        o   If the specification is 'A', and if several active WPBP periods
            exist, the amount is simultaneously reduced on a calendar-day basis.
        o   If the specification is 'D', the wage type is distributed to all
            existing WPBP periods without the amount being reduced.
        o   If the specification is 'S', and if the validity period starts or
            ends during the period, the entry in table WPBP is split using this
            date. The wage type is stored in table OT for the corresponding WPBP
            period.
            This parameter is only allowed if processing was accessed using
           function P0014.
           In this case, infotype 0014 must be processed before absence
           valuation and function PARTT. Otherwise, rejections occur during
           payroll processing.
       o   Specification 'X' is the combination of 'A' and 'S'.
           This parameter is only allowed if processing was accessed using
           function P0014.
       o   If the specification is 'W', and if the validity period starts or
           ends during the period, the entry in table WPBP is split using this
           date (as with option 'S'). Unlike 'S', the wage type is not stored
           in table OT.
           This parameter is only allowed if processing was accessed using
           function P0014.
       o   If the specification is ' ', the wage type is stored in table OT for
           each WPBP period in which the validity interval fits.
           This parameter is only allowed if processing was accessed using
           functions P0014 or P0015.
       If the WPBP split is set for a wage type, the wage type is stored
       without changes in table OT. If you specify a different wage type name
       in the second parameter, the wage type is stored with this name in table
       OT. Before you execute operation WPBPC, you may therefore need to delete
       the split using operation ELIMI.
       If a country-specific split (C1, C2, or C3 split) is set, the operation
       interprets it as an error. The employee in question is rejected by
       payroll. All other splits are transferred as they are.
      Output
        The processed wage type, or the wage type specified in the operation
        call, is written to table OT (output table) with the appropriate split
        indicator and reduced amount as operation output for each WPBP period.
        Parameter specification 'W' is the only exception.
      Syntax
        OOOOOSVVVV
        OOOOO       WPBPC       Operation name
        S
                    blank       distribute to all WPBP periods
                    S           split and distribute WPBP
                    W           split but do not distribute WPBP
                    A           distribute to active WPBP periods
                                with calendar-day reductions
                    D           distribute to all existing
                                WPBP periods
                    X           combination of 'S' and 'A'
        VVVV                    Results wage type
                    blank       input wage type = results wage type
                    wage        wage type name of input wage type is replaced
                     type       by wage type name of results wage
                     name       type
        Wage type before operation:
      Example
        M100        02          3000
        WPBP split
        01  June 01 - June 20 active
        02  June 21 - June 30 active
        VVVV                    Results wage type
                    blank       input wage type = results wage type
                    wage        wage type name of input wage type is replaced
                     type       by wage type name of results wage
                     name       type
        Wage type before operation:
      Example
        M100        02          3000
        WPBP split
        01  June 01 - June 20 active
        02  June 21 - June 30 active
        Wage type before operation:
        WType       WPBP        Amount
        M100        00          3000.-
        M200        02          2000.-
        Operation:   WPBPCA
        Wage type after operation:
        WType       WPBP        Amount
        M100        01          2000.-
        M100        02          1000.-
        M200        02          2000.-
        Operation:   WPBPC
        Wage type after operation:
        WType       WPBP        Amount
        M100        01          3000.-
        M100        02          3000.-
        M200        02          2000.-
    Regards
    Team Member.

  • How to change the POV in Smartview

    Hi Guru's
    How to change the POV in smartview? When i open the smartview it shows Accounts in Rows and Period in Column.
    I want to see Entity in Rows and Value in Columns. How to achieve it?
    regards
    Smilee

    Hi,
    From the ribbon Menu, select 'Query Designer'. Here, you can drag and drop required dimensions into rows & columns and click 'Apply Query' button, a new adhoc report will be created.
    Cheers, Vicky.

  • I want to change the posting period

    I want to change the posting period for closed period. how can to do?. My period 2010 is in period but I want periods in months. who can I help me?

    Hi Mary.......
    One you created you can not change the type of periods of Posting Period.
    This is SAP Standard that once you created you can not change it.
    But if you have not done transactions for that period then you can remove and recreate with the period type as 12 Months...
    Regards,
    Rahul

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

Maybe you are looking for