How to change the number of records displayed on personnel profile?

Hi Experts！
1.The thing which I would like to do is as a title.
2.And There is a part it is considered that is a change part.
However, the method of changing that is not known.
I need your help also with the direction and right or wrong which the modification method of the number of display records understands.
Best Regards！

Hi jyothi.
thank you for your reply!
>Change the visible row count as 1 and check.
I changed.
but change was not shown in the display of the number of the line.
when 「rendering style 」was changed, change was shown in the display of the number of th lines.
but  we need 「row repeat」 style.
regards.

Similar Messages

  • How to set the number of records displayed at run time

    Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

    Bookmark Go to End
    goal: How to vary the number of records displayed in a block
    programmatically
    fact: Oracle Forms Developer
    fix:
    Block property 'Number of Records Displayed' can not be changed during runtime
    using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
    the visual appearance of the form so that it creates effect of changing this
    property. To achieve such an effect follow these steps:
    1. in Forms Builder, in the multirecord block define the new set of items.
    The simplest way is to copy/paste the original item and rename created item.
    2. set properties of these new items so that they are the same as the properties
    of the original items. If these new items were copied from original items
    then properties are already the same. Modify following properties
    'Database item' on new items to value 'No'
    'Synchronize with item' to the value of the original item
    'Number of Items Displayed' to desired value.
    'Visible' to 'No'
    In other words, these new items are mirrors of original items.
    3. code event, which is meant to trigger the change in block appearance.
    This code should use SET_ITEM_PROPERTY built-in to set properties
    like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
    to desired value for items which are about to be displayed, then
    move cursor to one of these just displayed items with GO_ITEM built-in
    and then hide the previously displayed items.
    Example:
    Assume that the block is built on SCOTT.DEPT schema. Following will
    change the set of displayed items
    set_item_property('dept.mdeptno',visible,property_true);
    set_item_property('dept.mdname',visible,property_true);
    set_item_property('dept.mloc',visible,property_true);
    set_item_property('dept.mdeptno',enabled,property_true);
    set_item_property('dept.mdname',enabled,property_true);
    set_item_property('dept.mloc',enabled,property_true);
    set_item_property('dept.mdeptno',update_allowed,property_true);
    set_item_property('dept.mdname',update_allowed,property_true);
    set_item_property('dept.mloc',update_allowed,property_true);
    set_item_property('dept.mdeptno',navigable,property_true);
    set_item_property('dept.mdname',navigable,property_true);
    set_item_property('dept.mloc',navigable,property_true);
    go_item('dept.mdeptno');
    set_item_property('dept.deptno',visible,property_false);
    set_item_property('dept.dname',visible,property_false);
    set_item_property('dept.loc',visible,property_false);
    Regards,
    Monica

  • How to change the number of mails displayed

    I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

    Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

  • How to change the number of items displayed on the screen based on user input

    I need to place a number of input clusters on the user's screen based on the number of input types he will have.  Is there an easy way to do this?  (Say I have 3 different electrodes, I want to be able to add information for each then take this information and add it to a database, this case adding three new record sets to the database.  If I only have one electrode though, I only want one cluster on the screen and only one recordset will be added to the database)
    Message Edited by Vitamin on 01-11-2007 12:36 PM

    Place your clusters in a 1D array and create a property node for the array. You can use the Number of Rows property to control how many elements are shown. Wire the array into a for loop to index it.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
    Try to take over the world!

  • How to find the number of records per months  in cube

    Hi,
      how to find the number of records per months for my all cubes?
      Can i use the ListCube transaction to find totl number f records per cube monthwise ?
    Jimmy

    Hi,
    Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
    1.Copy the code into your Z<programname> from Se38.
    2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
    3.Save program.
    4.Schedule the program in background as required
    5.Create cube with infoobjects to hold no of records and Infoprovider name
    6.Load this cube based on event after the program job is done.
    Hence you can report on this cube to see no of records in  CUBE or ODS in your box.
    Please find the code below.
    Cheers,
    Kavitha Kamesh.
    types: begin of itabs ,
          tabname type dd02l-tabname,
          end of itabs.
    data: itab type itabs occurs 0 with header line.
    data: counter type i.
    data: begin of itab1 occurs 0,
    tabname type dd02l-tabname,
    counter type i,
    end of itab1.
    DATA: ITABTABNAME TYPE STRING.
    DATA: LENGTH TYPE I.
    DATA: OBJECT(30).
    data: str(6) type c.
    select  tabname from dd02l into table itab where ( tabname LIKE  '/BIC/F%' or tabname LIKE  '/BIC/A%00' )
    and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
    loop at itab.
      select count(*) from (itab-tabname) into counter.
      str = itab-tabname.
      if str = '/BIC/F'.
    LENGTH  = STRLEN( ITAB-TABNAME ).
      SHIFT  itab-tabname BY 6 PLACES LEFT.
    ELSEIf  str = '/BIC/A'.
      SHIFT  itab-tabname BY 6 PLACES LEFT.
      LENGTH  = STRLEN( ITAB-TABNAME ).
    LENGTH = LENGTH - 2.
    endif.
      itab1-tabname = itab-tabname(LENGTH).
      append itab1.
      itab1-counter = counter.
      clear itab-tabname.
      clear:  COUNTER.
    endloop.
    *********** itab1
    loop at itab1.
    write:/ itab1-tabname, itab1-counter.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        FILENAME                        = 'c:records.xls'
        FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = ','
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        DATA_TAB                        = itab1
    *   FIELDNAMES                      =
    * EXCEPTIONS
    *   FILE_WRITE_ERROR                = 1
    *   NO_BATCH                        = 2
    *   GUI_REFUSE_FILETRANSFER         = 3
    *   INVALID_TYPE                    = 4
    *   NO_AUTHORITY                    = 5
    *   UNKNOWN_ERROR                   = 6
    *   HEADER_NOT_ALLOWED              = 7
    *   SEPARATOR_NOT_ALLOWED           = 8
    *   FILESIZE_NOT_ALLOWED            = 9
    *   HEADER_TOO_LONG                 = 10
    *   DP_ERROR_CREATE                 = 11
    *   DP_ERROR_SEND                   = 12
    *   DP_ERROR_WRITE                  = 13
    *   UNKNOWN_DP_ERROR                = 14
    *   ACCESS_DENIED                   = 15
    *   DP_OUT_OF_MEMORY                = 16
    *   DISK_FULL                       = 17
    *   DP_TIMEOUT                      = 18
    *   FILE_NOT_FOUND                  = 19
    *   DATAPROVIDER_EXCEPTION          = 20
    *   CONTROL_FLUSH_ERROR             = 21
    *   OTHERS                          = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Rows Per Page doesn't affect the number of records displayed

    I just updated from 3.2 to 4.0 this morning. When I change the Rows Per Page value in the action menu the report doesn't change and the number of records displayed stays at 10. The report has ~6000 records. I edited the report attributes and add the rows selector to the IR search bar. This doesn't change the behavior either. I noticed that if I change the rows per page in the action menu then the drop down select list is updated, but the report still doesn't change from 10. I tried paging to the next set of results and it still remains at 10.
    Has anyone else experienced this problem?
    Tony

    Yes, Tony, I've seen this in several versions of APEX. In most cases, simply starting a new session was enough to force APEX to refresh the page and grab the new set of pagination directives. If that doesn't work, please give more info like: what type of report you are doing and what the Pagination values are. Please note the following:
    Report Template
    Pagination Scheme
    Enable Partial Page Refresh
    Display Position
    Number of Rows/Number of Rows Item
    Maximum Row Count

  • How to find the number of records in ods?

    how to find the number of records in ods?
    Pls suggest the solution apart going to the table of ods and seeing the number of records.
    Is there any program or function module to see the number of records in ods?
    For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

    Hi,
    I was looking at this and found the following tables that may be of help.
    One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
    DBSTATTADA
    DBSTATTDB2
    DBSTATTDB4
    DBSTATTDB6
    DBSTATTINF
    DBSTATTMSS
    DBSTATTORA
    We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
    The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
    Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • How to change the text under RECORD WORKING TIME IN ESS.

    Hi,
    How to change the text under RECORD WORKING TIME in ESS.
    Is there any setting at page or iview level?
    Please help me.
    Regards,
    Thirun.

    Hi,
    If it is standard business package ,then check home page framework
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
    Regards
    Koti Reddy

  • How to change the number im using on my messages?

    how to change the number im using on my messages?

    If you are asking about the telephone number, Messages/Preferences/Accounts/Messages account - click add e-mail and enter it.

  • How to change the number of filesystem inodes?

    Dear All,
    May anyone advices me "How to change the number of filesystem inodes?" ?
    Thanks you in advance,
    Best regards,
    Soret,

    As the old saying says: "You can tune a filesystem, but you can't tune a fish.".
    Anyway, Robert is right, even if it might depend slightly on the type of filesystem, its in any case true for UFS. The few things you can tune for UFS are tuned with "tunefs"..
    .7/M.

  • How to calculate the number of records in Multiprovider

    Hi Experts
    I have created a report based on the multiprovider (Consist of Cube and ODS)
    I need count the number of records inside the multiprovider, how can i do it in the reporting level
    Regards
    Santosh

    Hi,
    You can use calculated key figure with replacement path variable.
    Follow This:
    1) From the context menu of the Key Figure directory, choose New Calculated Key Figure.
    2) From the context menu for the Formula Variable, choose New Variable.
    3) Choose the Processing type as Replacement Path.
    4) In the next screen, select the Characteristic Info Object based on which the number of documents is to be displayed in the report (For example: Document Number / Order Number).
    5) Choose Next.
    In the Replace Variable with drop down box, choose Attribute Value.
    In the Attribute drop down, select Characteristic Reference (Constant 1).
    6)Choose Next.
    On the Save Variable page, an overview of the settings made for the variable will be displayed.
    Confirm the entries and Choose Finish.
    7) If the Formula variable is directly assigned to the Calculated Key Figure, a warning Calculated Key Figure is not defined correctly will be displayed while executing the Query.
    8) Properties of Calculated Key Figure dialog box, assign a Technical name for the CKF.
    9) set the Time of Calculation to After Aggregation.
    Hope this will help you.
    Cheers,
    DK
    Edited by: Debasish Khaitan on May 14, 2009 1:03 PM

  • How to limit the number of records in WebI Report

    Hi,
    I have a requirement where I need to display the WebI Report data only if the number if record is less than 65k.
    Incase if the records are more than 65k then the report should be blank and a text message needs to be displayed.
    The client dont want to set the number of records either in universe or at the edit query at the report. They want to limit once the report is executed.
    Please let me know if its possible to do it at the report level.
    Thanks in advance!!
    Best Regards
    SAP BO

    Optional prompts are not a problem.
    Assuming you first query uses the following SQL statement
    select a,b,c from t where x=y and z=@prompt(...)
    The query for checking the number of rows should use the following SQL code
    select count(*) from t where x=y and z=@prompt(...)
    The original query should be modified as follows
    select a,b,c from t where x=y and z=@prompt(...) AND (select count(*) from t where x=y and z=@prompt(...)) < 65000
    Regards,
    Stratos

  • How to get the number of records of a streaming result set

    Hi guys.
    So if it wasn't a streaming result set, I would have done this:
    {noformat}myResultSet<code class="jive-code jive-java">.last();
    {color:navy}*int*{color} numResults = </code>myResultSet<code class="jive-code jive-java">.getRow();
    </code>myResultSet<code class="jive-code jive-java">.beforeFirst();
    </code>{noformat}
    but being a streaming result set, beforeFirst() throws an exception...
    So how do you get the number of records in that result set? I wanna avoid an extra count(*) query, so I would appreciate other solutions than that.

    JoachimSauer wrote:
    vanwil wrote:
    you see, for now I just use a count(*) query to get the number of records, but that's adding a lot of extra waiting time...Iterating over the result twice will surely be slower then doing the count(*).great! so what I got now is actually the fastest way there is... awesome...
    If you get an exception, then you surely have a stack trace. That should tell you what happens, or at least where.com.mysql.jdbc.MysqlIO.checkForOutstandingStreamingData(MysqlIO.java:2066)
    Why do you need to know the number of elements beforehand, anyway?I need to know the number of elements because the incoming data goes into a table. Now of course, I could use ArrayList<String[]> or something, but wouldn't that require more memory resources than Object[][] ?
    No one can tell you that, at least not without more information (say, the stack trace for example).Here's the exception message:
    java.sql.SQLException: Streaming result set com.mysql.jdbc.RowDataDynamic@10c0ef2 is still active. Only one streaming result set may be open and in use per-connection. Ensure that you have called .close() on  any active result sets before attempting more queries.

  • How to restrict the number of Records into the Table?

    Is there any way that I can restrict the number of records can be entered into the table?
    For example I have created a table TAB1 with size category 0( zero).
    User dont want to enter more than 100 values, How to restrict the number entries? Whether Basis can do it?
    Regards,
    Prathap

    Hi Prathap,
    You can write a code in table maintenance events to restrict the number of Records added into the Table to constant.
    Solution:
    Se11 -> enter table name (TAB1) -> F6 -> Utlities -> Table maint. generator -> Envirnment -> modification -> events -> write here the form routine name.
    Double click on routine name. You will get into include section of the code. Write here code like:
    IF current_rec_num > 100.
       messgae error 'Entry restriceted to 100'
    ENDIF.
    Somewhat this way you can achieve your target.
    Regards,
    Sachin

Maybe you are looking for