How to change the number of "windows recently closed" that appear in "Historic" menu?

The maximum number of "windows recently closed" i can have available in my "Historic" menu are 3. How can i change the options it to get more than that?

Note that Firefox always seems to remember at least one closed wind even if you've set the above mentioned browser.sessionstore.max_windows_undo pref to 0. That can be a problem with pop-up windows that won't allow to open additional tabs or close existing tabs without closing the window.

Similar Messages

  • How to change the number of mails displayed

    I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

    Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

  • How to change the number im using on my messages?

    how to change the number im using on my messages?

    If you are asking about the telephone number, Messages/Preferences/Accounts/Messages account - click add e-mail and enter it.

  • How to change the number of filesystem inodes?

    Dear All,
    May anyone advices me "How to change the number of filesystem inodes?" ?
    Thanks you in advance,
    Best regards,
    Soret,

    As the old saying says: "You can tune a filesystem, but you can't tune a fish.".
    Anyway, Robert is right, even if it might depend slightly on the type of filesystem, its in any case true for UFS. The few things you can tune for UFS are tuned with "tunefs"..
    .7/M.

  • How to change the font size of Text Box  Properties Appearance tab into 2 decimal digit.

    How to change the font size of Text Box  Properties Appearance tab into 2 decimal digit. I am uanble to modify it to 5.38 pt for example. Its only allowing to 1 decimal place.

    Click on each field and the choose Properties from either File menu (or if on Mac hold dow mouse button until context menu appears choose properties)
    go to Font
    choose desired size and type font,you can choose to make this the default.
    Do this with each field.
    Or if you have a lot of fields:
    while one is selected select all of them
    then go to fonts in properties
    change Font and size and make default.

  • How to change the icon for 'windows group' in Java 1.6 [Windows XP] ?

    Hello,
    I was wondering if there is a possibility to change the icon for 'windows group' in Java 1.6...
    I'm using Windows XP SP2. Now the windows from my Java 1.6 application are grouped with the standard Sun icon [screen below] on the group.
    http://img382.imageshack.us/img382/8995/iconbl1.png
    I would like to change the icon for my own. Is there a way to do that ?
    Please help.

    Whichever icon I use for the main frame (I tried few), after grouping the main frame and other sub-frames the icon is changed to standard 'Java Sun' icon as you can see in the screenshot from my first post. The problem occurs only when frames are grouped, when the are separated in the task bar their titles and icons are ok...
    So how can I change the icon/title for the group only (for Java 1.6 in Windows XP) ?

  • Satellite Pro C660-1JL - How to change the language of Windows 7?

    Hello,
    I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1. And would like to change language from German to Russian.
    According to instructions from microsoft home page I could not get the result. MUI pack is not shown when searching for Windows up-dates (some other up-dates are only available, but not language pack)...
    What would you recommend how to solve this problem ?
    Its Satellite Pro C660-1JL

    Hey,
    > I bought Toshiba with preinstalled official Windows 7 Professional 64 service pack 1
    You cant change the language on Windows 7 Professional, this is only possible on Windows 7 Enterprise (volume license) and Windows 7 Ultimate.
    So if you want another language, buy Windows 7 Ultimate or be happy with current language of Windows 7 Professional. ;)

  • How to change the number of rings before going to voicemail?

    hi, i have call forwarded my calls from my macpro (skype) to my iphone4s and want to change the number of rings to 15 seconds.  Can someone help please?

    You'd need to contact your carrier. They're the only ones who can change that.

  • How to change the paragraph style of every paragraph that only contains an anchored object?

    Hi,
    I have a document in word that needs to be converted into indesign. The document containts instructions, each step followed by an image.
    I've managed to import the document into Indesign, and applied a paragraph style with numbering to everything (text an image).
    Now, how to change the the paragraph style of every paragraph that only contains a image? I need to get rid of the numbering.
    Thanks in advance.

    Create two Paragraph Styles and name them Image and Non-Image. Apply the paragraph styles manually to the text containing image and not containing images.

  • How to change the Number of IVR ports in a UCCX?

    I know this question has been asked before but it needs to be asked again, as previous answers do not seem to apply.   The simple quesiton is:  If you have a UCCX and if after install you check you check License information and you note that you have 150 IVR ports; how do you increase the number of ports to 300?  
    I have been told that the number of ports is set by the class of the machine hardware and is not a license issue.   Others have suggested it is a license issue?   At the end of the day, however, I want a step by step procedure for adding more IVR ports to my deployment.   Even if that means buying more licenses (though I can not find a SKU).
    I have several clients that have UCCX and are having calls that exceed the number of IVR ports.   Before we get into a discussion of CTI ports or Call Controll Groups, let me identify that I think they are the same.    I can create a CTI Call Control Group with 300 paths, but if I only have 150 IVR ports I am in serious trouble on the 151 call!
    I had a lab system that installed under vmware with 150 ports.  No matter how I tried to configure the CVA it always came up 150 ports!   I added a NFR license to my lab and magically it turned it into a 12 IVR system, so licensing does have something to do with it!  
    I have htis experience on Version 8 and now on Version 9!   I need more IVR ports than appear in the installation.  I want to know exactly the steps needed to increase the number of IVR ports to the maxium of 300 for an enhanced system!
    I can refer CISOC TAC to several tickets I have opened on this subject all with unsatisactory answers!  Most recently 626743961
    Peter Buswell (aka DrVoIP)
    http://blog.drvoip.com       

    Here's the long answer
    Peter Buswell wrote:I know this question has been asked before but it needs to be asked again, as previous answers do not seem to apply.   The simple quesiton is:  If you have a UCCX and if after install you check you check License information and you note that you have 150 IVR ports; how do you increase the number of ports to 300?  
    Since I see below that you mentioned that the system in question is Enhanced, the answer is simply, install on faster hardware.  Presently the best hardware you can get is VMWare ESXi with the 400 Agent License OVA, which gives you 400 IVR Port Licenses.
    Standard licensing works the same as Enhanced, as far as IVR Port licenses go.
    If you were wondering about Premium, then it's a 1:2 ratio of agent:ports.  You cannot buy Premium ports directly, instead you buy them indirectly through the process of buying Premium Agent seats.  So if you had a Premium UCCX with 100 Agents, you would have 200 ports, and if you desired to have 250 ports, you simply buy 25 more Premium Agent seats.  Premium does still need to adhere to the hardware limits.  I have seen partners sell someone an Enhanced UCCX which gave them 300 ports, but they only had like 50 Agents.  A year later, the customer upgraded to Premuim, but only bought 50 seats, and thus downgraded their port license count to 100.  A third of what they had!  The solution?  Buy 100 more Premium Agent seats so your total goes up to 150 Agents, and thus your ports go up to 300.
    Peter Buswell wrote:I have been told that the number of ports is set by the class of the machine hardware and is not a license issue.   Others have suggested it is a license issue?
    These are both correct statements.  Just remember, that it's licensed based first for Premium, then hardware limited.  Standard and Enhanced are hardware limited only.
    Peter Buswell wrote:At the end of the day, however, I want a step by step procedure for adding more IVR ports to my deployment.   Even if that means buying more licenses (though I can not find a SKU).
    Again, for Standard and Enhanced, you need to move to bigger/better hardware to get more ports, assuming you're not already at the meximum of 400.
    Here is the document which walks you through moving to bigger hardware: Disaster Recovery Guide
    And for Premium, you need to purchase the SKU for a Premium Agent Seat license.  It's a 1:2 ratio for agents:ports.
    Peter Buswell wrote:I have several clients that have UCCX and are having calls that exceed the number of IVR ports.
    I'm not a partner, nor in sales, but I thought there was an A2Q process which validates CC designs for sales people.  At any rate, it sounds like they were either under sized or outgrew their overhead, and something needs to be done.
    Sometimes you can simply dump excess calls off.  Think about playing a high call volume message to callers and then drop them.
    Other times you can drop them into voicemail, and come back to it later.
    I've seen some basic call back functionality implemented with an external data source, which could alleviate ports.
    Lastly, I've seen improperly designed scripts which loop on themselves or other scripts, causing a high port usage.
    My point is that there's a few options here, outside of simply increasing the size of the server or purchasing new licenses.  There's no one size fits all answer though.
    Peter Buswell wrote:Before we get into a discussion of CTI ports or Call Controll Groups, let me identify that I think they are the same.
    Are you saying that CTI Ports and Call Control Groups are the same?  Or that CTI Ports/CCG's are the same as IVR Port Licenses?  Cause the former is true, while the latter is not.  Think "oversubscribed" CTI Ports.
    Sometimes it is advantageous to oversubscribe your CTI Ports, to achieve a more dynamic environment.  E.g., I have 100 ports, and all 100 are used for inbound calls.  I develope a single inbound app, which is limited to 10 ports, and handles small bursts of calls.  What happens is that, if the new inbound app is running, the most it can "steal" from the inbound calls is 10 ports.  However, if the app is not running (because it doesn't run all day, it's mostly bursty in nature), I can still have my regular inbound calls go all the way up to 100.
    Peter Buswell wrote:I can create a CTI Call Control Group with 300 paths, but if I only have 150 IVR ports I am in serious trouble on the 151 call!
    This is true.  Again, you need to decide if you really need the extra ports, of if there is some solution to solving this problem without making a hardware/license purchase.  These kinds of problems still exist for customers at the 400 port level, and they don't have the option to "buy more."
    Well, that's not entirely true.  While you cannot grow past the 400 port limit today, you could install another UCCX instance on the same CUCM cluster, effectively doubling your capacity, but breaking your administration into two separate domains.
    Peter Buswell wrote:I had a lab system that installed under vmware with 150 ports.  No matter how I tried to configure the CVA it always came up 150 ports!
    What's CVA?
    Peter Buswell wrote:I added a NFR license to my lab and magically it turned it into a 12 IVR system, so licensing does have something to do with it!  
    The NFR is most likely a Premium license.  Refer back to the 1:2 ratio, and that would tell me you have an NFR license for 6 Premium Agents.  Installing a higher level license on a lower level licensed system brings the whole system up to the higher level.  Recall my partner story about the Enhanced to Premium upgrade scenario.
    Peter Buswell wrote:I have htis experience on Version 8 and now on Version 9!
    The licensing doesn't change from 8x to 9x.
    Peter Buswell wrote:I need more IVR ports than appear in the installation.  I want to know exactly the steps needed to increase the number of IVR ports to the maxium of 300 for an enhanced system!
    You buy bigger/better hardware, and use the link I provided above for moving to that new hardware.
    Peter Buswell wrote:I can refer CISOC TAC to several tickets I have opened on this subject all with unsatisactory answers!  Most recently 626743961
    I would be surprised if there is a single Cisco TAC person who doesn't understand this simply IVR Port licensing model.  Perhaps there was some miscommunication about what was being asked, and what answer was being given.
    I hope that helped to clarify some things for you.  Also, if you are a partner, reach out to your CAM and ask for a one on one with a UCCX guru who can sit down with you.  Cisco would want you to be successful with selling their products.
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • How to change the number apple has for me

    I'm stuck :-(
    I'm overseas.
    I was in the Netherlands and now I am in Austria - I have an Austrian sim in my phone - yes I can receive texts on it.
    I'm upgrading to iOS8
    In iCloud it wants me to enter my pin and then the code sent to my phone.
    It says it is sending it to my Dutch Number but I need to change this to my Austrian number to receive the SMS.
    I have followed the links "don't have access to this phone?"
    - but they won't let me enter anything other than a US phone number - and in fact I cannot see my Dutch number in there anywhere either ?!
    I cannot for the life of me remember how I entered the Dutch one or maybe I could change it to the Austrian one now!
    - more to the point - how will I change this back to my US number when I return?
    HELP !

    update - maybe helpful....
    I'm told to:
    Go to My Apple ID.
    Select Manage your Apple ID and sign in.
    Select Password and Security.
    In the Trusted Devices section, select Manage.
    To add a number, select Add an SMS-capable phone number.
    To remove a number, select Remove next to the verified phone number associated with your Apple ID.
    It's all good down to step 3 but in there I do not see a "Trusted Devices" section - it only talks about 2 step verification, security questions and my birthday.

  • How to change the number of multicam previews (CS6)?

    Hi folks,
    Just invested in CS6, upgraded from CS5, and I've got the following problem.
    When I create a multicam edit, the old fanshioned way using sequence nesting, I can't seem to adjust the number of multicam preview windows, or rather reduce the number.
    I'm preparing to use the multicam monitor to edit 3 clips, left cam, centre cam, right cam, from a musical performance, however the default number of previews in the multicam monitor is 9, where I only need 3. The problem being the 3 previews I need are really small because of the un-used blank previews, all 6 of them.
    How can I reduce the number of multicam previews to the number I require, resulting in larger sized previews? e.g. In this case I imagine 4 preview spaces would make better use of the screen real estate. Any help would be greatly appreciated.
    Thanks in advance.
    Jon

    Jim Simon wrote:
    I need the preview monitor.
    Why?
    It's easier to work using that.
    But the problem now actually seems to have resolved itself. I suspect it was indeed to do with the number of enabled tracks, don't know why it didn't do it straight away though.
    Anyways. Thanks for help folks.

  • How to chang the number of plots in the plot legend during run time?

    Hi, I am using waveform graph. At run time only i will come to know, how many plots should be plotted in the waveform graph. Based on the number of plots i have to change the plot legend. Is there any method to do the same?

    Maybe something like this?
    The inputs on the left are (from the top)
    your array of data you want to plot (or anything that contains the number of inputs you have)
    next one is an array of colorschemes (maybe you dont need this)
    and the third is an array of booleans that are true if that "channel" should be plotted and false otherwise
    /Anders
    Message Edited by Tohatsu on 01-08-2008 08:56 AM
    Attachments:
    graph.JPG ‏10 KB

  • How to change the browser title Window or View Dynamically.

    Hi
    I have several application calling my applicationm and i need the browser that lauches the application to have different Titles on the Browser Title.
    How can I change the Title from the Window or View?
    Please advice.
    Thank you.
    Regards,
    Vinod

    The browser title gets pulled from the WD Application Description.  Currently there is no API to change the browser title from within WDA.  Next year in 7.02 we do add such an API.  Here is an example of what will be possible in 7.02:
    data l_window_title type string.
      case lv_transaction_type.
      when wd_assist->create_mode.
      l_window_title = `Create Sales Order`.
      when wd_assist->display_mode.
      l_window_title = `Display Sales Order: ` && so_id.
      when wd_assist->change_mode.
      l_window_title = `Change Sales Order: ` && so_id.
      endcase.
      wd_this->wd_get_api( )->get_component( )->get_application( )->set_window_title( l_window_title ).
    Setting the title on a View is easier.  You can just use a Tray or Group UI element as the root of your view and set the title property of the UI element dynamically by context binding to the property.

  • How to change the number of  tab in a Tab Canvas?

    hello :)
    any answers please ?

    user9068133 - Posted: Nov 3, 2010 2:42 PM yes , it works very well on forms 10g, i know that is not a big problem but what can i do ! i have searched on google how to do that but i didn't find nothing .>
    What exactly did you search for on Google? What is "that"?
    Are you trying to add more tab pages to a Tabbed Canvas from the Forms Builder? If so, user13390506 is sort of right. Click on the "Canvases" node of the Object Navigator press the *<font color="green">green + </font>* button to add a new "Content" canvas to your form. Now you need to open the property pallet of the new canvas and change the "Canvas Type" property to "Tab." You will notice that the icon of the new canvas you created in the Object Navigator has changed. Click on the + node next to your new "Tab" canvas to reveal the "Tab Pages" node. Again, open this node (by clicking on the +) to reveal the individual tab pages. By default, Forms will create two tab pages. You can add a tab page in the "Tab Pages" node by clicking on the node and then clicking on the + button. To remove a tab page from the "Tab Pages" node, click on the tab page you want to remove and then click on the *<font color="red">red -</font>* (minus) button.
    If you are trying to add a new tab page during the Form runtime - as I mentioned before - this is not possible.
    Also, what is your Forms version?
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

Maybe you are looking for