How to change the optimal virtual memory

Hi, i use a tevra m2 1.8 GHz 512 MB laptop.
normally used for office work and not for gaming,
antivirus bitdefender consumes lots of memory so one has to be cautious on using memory.
so i was wondering if anybody knows how to configure the best the 'virtual memory' : min and max : about 1.5 and 2 times the RAM-size ?
Thanks in advance

Hi
Please go to:
System Properties - "Advanced" tab - Settings in the performance area - "Advanced" tab - "Change" button
There you will find the Virtual memory settings.
I would recommend setting the settings to "System managed size". In this case the OS will control the value automatically.

Similar Messages

Portege M400: How to change the 945GM graphics memory size?

Hi,
Does anyone knows how can i limit the maximum and minimum graphics memory on 945GM Graphics Card (M400).
My goal is to set it FIXED to 128 so that i don't have freezes when video memory changes. It is VERY anoying and is punishing my work (Office 2007 is very eager either on video and main memory).
Thanks,
Filipe

Hello Filipe
It will be interesting to know what you mean under punishing the Office 2007 work.
Anyway as far as I know on Intel graphic card (shared memory) it is not possible to fix graphic memory to some specific value (no BIOS settings and also no any setting in advanced display settings). If you want to use more RAM for graphic I recommend you to upgrade RAM.
Sorry but I dont see any other solution.

How to change the title of an object in the build order window?

In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
I'm running the following:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5

Custom names can't be applied to objects in the build list.
They are labeled as either; text, shape, table, chart or the filename of an image

How to Change the Garbage Collection Algorithm in WLS 9..2

Hi All
I am trying to find out the way to configure the GC algorithm in weblogic 9.2 to type bea.Jmapi.GarbageCollector@.
By default it is showing ‘Nursery, parallel mark, parallel sweep’ . We were trying to change it to generational (two-spaced) with a parallel mark algorithm and a concurrent sweep algorithm or bea.Jmapi.GarbageCollector .
To change the same I modified the memory argument in commenv.cmd to set MEM_ARGS=-Xms128m -Xmx256m -XXsetGC:genparcon
Still Garbage Collection Statistics section in web logic console shows the same default value.
Could anyone tell me if I am missing something?
thanks in advance

There is nothing is WebLogic that will define the JVM GC algorithm, that is up to the JVM settings that are normally configured using params in the start scripts.
If you are using JRockit, you can ask in the forums but the JVM documentation should really be sufficient.
JRockit
Same thing for the Sun JVM, there is lots of information out there on how to change the GC algorithm.
The thing that is nice about JRockit is that you can use the Mission Control tooling to take recordings, look at the GC's and make adjustments easily. Sun has some tooling as well with jvmstat (and visualgc), but I'm not as familiar with it.
http://java.sun.com/performance/jvmstat/
Both of those tools would be much preferred to printing the GC info to a file and trying to parse it in my opinion.

Win10 blurry fonts/programs | How to change the accent color?

Hi,
Recently I installed Win10 Build 9926 on a virtual machine for testing and feedback and I am havin' some problems...
First, I changed the Display settings to 125% and now the third-party Win32 classic apps are looking blurry... [Sorry, i can't provide a image link]
Second: The Personalization "pane" (Sorry, long time mac user) only has options for the lock screen and now I dont know how to change the accent color...
And this, I can keep with it, but I made a registry tweak to enable the start screen but now when I use it the taskbar is still there!!! ANNOYING!
Any help will be appreciated...
Thx,
Tiago

Hi,
I made a test in our testing enviroment, found that when this problem occures,
Sign Out current user and login again would be helpful to resolve this problem. Please take this method as a workaround temporarilly.
Second question, to modify backgound color, you can access system personalize to modify the color:
Roger Lu
TechNet Community Support

How to change the web server??

How to change the web server in the details of the mobile application component in the MI webconsole??

hello irene,
had your tried checking on the "Use IP instead of host
name" checkbox?
to edit your registered application info, go to
"Upload Mobile Component" tab and click on the Edit icon
on the left part of the record list which corresponds to
the application you had just uploaded.
your application is uploaded to the same host as your
web console application is running on. if you like to
point it to a different server where you have your
archive accessible, you have to change your mcd
deployment attributes on your middleware. try the ff:
1)run tcode: mi_mcd
2)click on Create Mobile Component
3)Enter Mobile Solution Name and Version
4)Click on Display MCD
5)Select Deployment Tab
6)Click on Edit
7)Change the values of WEBSERVER and WEBPATH location eg.
if your archive is located at
http://myotherserver:80/archive/myapplication.war
your entry will be:
WEBSERVER: http://myotherserver:80
WEBPATH: /archive/myapplication.war
where you myotherserver is the name of your http host
server and myapplication.war is the name of your archive.
the archive directory is just a virtual directory where
your application archive is.
you might need to change the port number depending on
your http server port.
regards
jo

How to know the optimal Degree of Parallelism for my database?

I have an important application on my databae (Oracle 10,2,0) and the box has 4 CPU. All the tables are not partitioned. Should I set the parallel degree by myself?
How to know the optimal Degree of Parallelism for my database?

As far as I am concerned there is no optimal degree of parallism at the database level. The optimal value varies by query based on the plan in use. It may change over time.
It is not that difficult to overuse the PQO and end up harming overall database performance. PQO is a brute force methology and should be applied carefully. Otherwise you end up with inconsisten results.
You can let Oracle manage it, or you can manage it on the statement level via hints. I do not like specifying degrees of parallelism at the object level. As I said, no two queries are exactly alike and what is right for one query against a table may not be right for another query against the table.
If in doubt set up the system to let Oracle manage it. if what you are really asking is how many PQO sessions to allocate then look at your Statspack or AWR reports and judge your system load. Monitor v$px_session and v$pq_slave to see how much activity these views show.
IMHO -- Mark D Powell --

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the default SSH port on Cat 6500 WS-SUP720-3B

I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
Thanks in advance..

Hi Neil,
Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
Regards,
Nicolas

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How to change the default database charset to ISO8859-1?

Hi all,
I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
Thanks in advance.
chin.

Thank you!
I will try later!
But,who can tell me more detail !
thx

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the optimal virtual memory

Similar Messages

Maybe you are looking for