How to change the order of columns displayed in Stacked Canvas

Dear Member,
I have a Stacked Cavas which has many Items. How do i change the order of the Items displayed when the form is opened?
I checked the X-Position in the property palette of each item, all the items have an X-position=0. I am really confused how do i change the order of the columns which are displayed in the stacked canvas when opening the form.
Any help is greatly appreciated.
Thanks
Sandeep

If i Try to use SET_ITEM_PROPERTY('BLOCK.ITEM', X_POS, myXpos);
then it will increment each item X Position. The Total Stacked Canvas width i have is 9 and there are total of 36 items in the stacked canvas each of equal width 1.1,
so the total becomes 38.5 which is greater than 9.
I saw all triggers in the code, i dont see any code which exclusively determines item positions at run time. As i said before all the items have X position as zero but still they come up nicely.
i HAVE A button in the form and following is the code which is written in when-button pressed trigger :
show_view('DETAIL_CNT');
GO_BLOCK('XX_PA_BUDGET_DTL_BLK');
where DETAIL_CNT is the content canvas and 'XX_PA_BUDGET_DTL_BLK' is the data block in which items from both stacked and content exsist.
I dont understand why this is happening.
Thanks
Sandeep

Similar Messages

How to change the order of columns in a speadsheet?

It seems this would be completely straight-forward. However I can find nothing in help to tell me how to do this. I am using a spreadsheet for data so want to be able to rearrange in the order of the columns. How does one do this?
Thanks.
John

I don't want to move or sort the data. What I want
to do is change the order of the columns. I have
columns A through P. I want to move columns M, N,
O, and P to come after A and B so I can see the
information in these 6 columns in one glance.
How does one do that?
One doesn't, but there are altenatives.
1.
Select columns C..L by clicking and dragging across the column headers.
Go Format (menu) > Column width.
Set the width to 0 (zero) and click OK.
This hides columns C..L, showing A, B, M, N, O, P...
You can still enter data into cells in columns C..L by clicking on a cell in column B, then pressing tab to move through the hidden columns.
To restore the display, select columns B..M then reset the column width to a visible value (the current width of column B will be the default).
2.
Copy the values in columns A, B, M, N, O, and P into a set of contiguous columns. Set a New View to show these columns in a separate window.
Example:
Go Window > New View
Drag the new window that opens up and left to cover the initial window.
In AA1, enter =A1
Select AA1..AB1 then Fill right (command-R)
In AC1, enter =M1
Select AC1..AF1 then Fill right
Select AA1..AFn where n is the last row in which you have data then Fill down (command-D)
This copies the contents of the cells you want to view together into a set of cells that are together. You can view them by going to the Window menu and switching between the two views of the same spreadsheet. Or you can skip the step of creating a second View, and scroll from one location in the sheet to the other.
The usual caveat applies: Anytime you're making extensive changes to a document, work with a COPY and keep the original as a backup you can revert to should a misstep along the way result in data loss.
Regards,
Barry

Changing the order of columns in a table

Can anyone tell me how to change the order of column in a table.
I want a new column to be added in a table in 2nd position.
Is there any way out for it?

1) Does this have something to do with security? If not, it really ought to be posted in a more appropriate forum (Database - General for example).
2) Why? If you care about the order of columns in a table, you're almost certainly doing something wrong. You can control the order of columns in a view, however, so you can put a view layer on top of the table to present the columns in a friendly fashion.
3) Not without recreating the table. You can use the DBMS_REDEFINITION package to recreate the table with zero or minimal downtime but behind the scenes, you're really just creating a new table, copying the data over, dropping the old table, and renaming the new table to use the old table's name. DBMS_REDEFINITION does some extra work to track changes so that the original table can be available until the last possible moment.
Justin

How do I change the order of columns in the responses table?

How do i change the order of columns in the responses table in FormsCentral? The default setting puts them in reverse order!

Hi,
The issue with the default ordering of columns in the response table is something that we hope to address in the next update to FormsCentral. In the meantime, you can reorder the columns by selecting them then click/drag using the gray area above the column name. As shown below, an orange marker will show you where the columns will be placed when you release the mouse button.
Sorry for the inconvenience.
Regards,
Brian

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Change the order of columns in a report

hi all.
i can't change the order of columns in a report not just by altering the select statement. where can i change it?
thanks.

hi master
sir i use 6i report i see full report but i culd not found
report region and report attributes
sir please give me step or idea or tree where report region and report attrinutes"
thanking you
aamir

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

How to change the order of users in appearance of login screen?

Hello!
Because we often switch to a user,
which is listed last in login screen,
we want move them to the second place.
How to change the order of users in appearance of login screen?
Thank you for a tip
Erhy

The order users show up on the login screen is the way they are ordered under the
C:/Users directory. This is usually alphabetical, AFAIK there is no other way to change the order other than to change the username to something that starts with a letter that will be higher alphabetically.

How to change the order of the fields in the queryoutputnode in OVS.

How to change the order of the fields in the queryoutputnode in OVS.

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

How to change the name of column in ActionScript?

I possibly know how to change the name of the column in DataGrid using mxml but dont know how to change the name of column in DataGrid using ActionScript.
var newDataGrid:DataGrid=new DataGrid();
newDataGrid.dataProvider=arrayCollection():
It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
Please HELP!

Give your datacolumn and id. Then set the property for that column through the datacolumn id.
DataGridColumn id="nameDC"
Script:
nameDC.headerText = "Name";

How to change the number of mails displayed

I have two accounts on my iTouch..I know how to change the number of mails displayed for the exchanged account (being the second-added email account)...But I don't know how to change it on my account email... I only want the recent like 20 messages to be displayed... But after I was reading through my email (meaning that pretty much all my emails were downloaded).. I couldn't decrease the number of emails displayed on my account email anymore....

Settings>Mail, contacts, calendars>Mail>Show Recent Messages. The least amount that you can set it for is 50 messages.

How to change the order of the columns in the Message List in Mail?

In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc?
The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard.
Also, there is a column which has a black circle in it. What does it mean? I don't mean the smaller black circle, because that shows which emails been read and which are not yet read.
Thank you.
Lorna

To arrange columns, click on column title (To or From) and drag right or left.
The black dot column shows the type of message. There will be a counterclockwise arrow if the email is a response to a previous email or there will be an icon of a note if the message is a note

How to change the order of the columns in system matrix?

Hi all,
Is there any way to change the order of the columns in system matrix through SDK, without doing it from 'Form settings'??

Hi ,
is this true for the 'Active' property also , in CPRF table? I want to check whether the Item is active or not becuse, when I m trying to copy the value in item which is not active, I m given error. Is there any way to change or active the 'Active' flag in form settings at run-time?
Any clue?
Thanks in advance,......
Binita

How to change the order of download options as per our convience in obiee

hi frineds,
How can i change the order of the download options in obiee dashboard ?
like if you press download option you see
download to excel
download to excel 2000
download data
download webpage(mhtml)
how to change this order.????????

The download options are setup in OracleBI\web\msgdb\messages\viewscontrolmessages.xml
- Search for the tag *<WebMessage name="kmsgEVCDownloadLinks">* that contains the download links within the hyperlink tag
- Each hyperlink tag is a download option
- Reorder as you require
- The actual text that gets displayed as a link can also be customized by editing the entry for a message such as kmsgEVCLinkDownloadExcel in the OracleBI\web\msgdb\l_en\messages\viewmessages.xml [the customization is locale specific]
- Restart the presentation server

How to change the order of columns displayed in Stacked Canvas

Similar Messages

Maybe you are looking for