How to change the order of phone numbers in Contacts?

For the phone numbers for a specific contact on my iPhone, I may have: 1. work fax, 2. work, 3. home, 4. mobile. For the same contact synced on my Mac, I have, in Address Book: 1. home, 2. mobile, 3. work and 4. work fax. I obviously prefer to have Mobile first.
Is there a way to control and change the order of phone numbers for a contact on the iPhone?

Before you sync your iPhone the next time, activate the option "sync addressbook" and "replace all Contacts on iPhone". The next sync will replace your contact info on your phone. From that point on all contact infos will be the same on your mac and and your phone. And changes or new infos will also be seen on both systems.
Hope this helps

Similar Messages

How can I change the order of phone numbers in a contact?

I have contacts that have more than one phone number (I am sure we all have those in this day and age). The importance of the phone numbers varies over time and I want to have the most important one as first on the list. How can I change the order that phone numbers are displayed within a contact?
Thanks for any help.

Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

How do I change the order of phone numbers in a contact?

When I enter phone numbers for a contact on the iPhone, they seem to be stuck in the order they were entered. Is there any way to change the order using the phone interface? I sync with Yahoo Address Book. Will the order be preserved if I change the order there?

Ditto! I am having the same problem. Anyone?

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

How to change the order of users in appearance of login screen?

Hello!
Because we often switch to a user,
which is listed last in login screen,
we want move them to the second place.
How to change the order of users in appearance of login screen?
Thank you for a tip
Erhy

The order users show up on the login screen is the way they are ordered under the
C:/Users directory. This is usually alphabetical, AFAIK there is no other way to change the order other than to change the username to something that starts with a letter that will be higher alphabetically.

How to change the order of the fields in the queryoutputnode in OVS.

How to change the order of the fields in the queryoutputnode in OVS.

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

The order of phone numbers changes in iphone

I list phone numbers in Contacts in the order that I want them to appear, but the oder changes once they are in the iphone. The contacts show up correctly on my computer and in Mobile Me but different on the iphone. I have the current OS on my phone.
For example, each person with multiple phone numbers there is usually an order of which number is best to reach that person. For some people the first place to try and reach them would be their mobile number, for business associates I might want to call them at work first before trying them at a different number.
Another example is my husband. I want our home phone on top, his regular mobile number listed next, and he has a back up mobile phone for emergencies. Annoyingly, the back up mobile number is what shows up on the iphone as his first phone number.
I've asked about this in my "One to One" appointments and they told me to check with Mobile Me. I checked the mobile me support and they say it has to be a iphone issue. I have had two different 3G iphones and both did this. I've tried to work around this by deleting the entire address book and then importing all fresh info and this doesn't help. It is also random, it is not consistently putting any particular group on top.
I would really appreciate a solution.
thanks

Before you sync your iPhone the next time, activate the option "sync addressbook" and "replace all Contacts on iPhone". The next sync will replace your contact info on your phone. From that point on all contact infos will be the same on your mac and and your phone. And changes or new infos will also be seen on both systems.
Hope this helps

How to change the order of the buttons in MIDlet?

Hi everybody,
I need to put at the right side of my screen the button menu which includes �Save� and �Save Group� buttons and at the left side the button �Back�. I declared commends like these:
private Command backCommand = new Command("Back", Command.BACK, 1);
private Command saveCommand = new Command("Save", Command.OK, 3);
private Command saveGroupCommand = new Command("Save Group", Command.OK, 3);
and got the completely different order from what I need. I can�t change the order even if I try to change the priority of commends.
Does anyone know how to solve this?

You don't have any real control over the positioning of the Commands. The implementation decides where to put them. You can have some influence by using the command type and priority arguments. Usually type has more weight in that decision. For example, if a Command is of type BACK, then the implementation will usually do it's best to put it on the "negative" soft button (ie, the right soft button on Nokia handsets usually hold the negative commands).
So playing around with the Command types you'll probably manage to arrange those Commands how you want, but giving the appropiate type will ensure that they are mapped in a way that's closer to the phone's native UI.
shmoove

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to change the order of download options as per our convience in obiee

hi frineds,
How can i change the order of the download options in obiee dashboard ?
like if you press download option you see
download to excel
download to excel 2000
download data
download webpage(mhtml)
how to change this order.????????

The download options are setup in OracleBI\web\msgdb\messages\viewscontrolmessages.xml
- Search for the tag *<WebMessage name="kmsgEVCDownloadLinks">* that contains the download links within the hyperlink tag
- Each hyperlink tag is a download option
- Reorder as you require
- The actual text that gets displayed as a link can also be customized by editing the entry for a message such as kmsgEVCLinkDownloadExcel in the OracleBI\web\msgdb\l_en\messages\viewmessages.xml [the customization is locale specific]
- Restart the presentation server

How to change the order of the tabs in featured news?

Hi,
I use the 'Featured News' widget on my company website and it has 10 tabs. The newest item is at the top but when I add a new tab it goes to the bottom and I can find no way of changing the order of the tabs so that everytime I add new news I have to copy each tab and it's content down one place in order to get an empty tab at the top to put the new news item in. This takes an unneccesssarily long period of time. Can someone please let me know if there is an easy way to change the order of the tabs?
Thanks very much ;0)
Justine

Just click on the title tab until it is isolated (one click before the text is highlighted) and move the tab to the position you want.
Thanks for your reply. I've done this in the past but found that the position of the tab in terms of it's place in the hierachy doesn't change so if I move the top tab down one, the way you've described and then upload the page I find that the second tab down (which was the first previously) displays first. How can I change the 'position of the tabs interms of their hierachy in the widget?
Thanks again
J

How to change the order of columns in a speadsheet?

It seems this would be completely straight-forward. However I can find nothing in help to tell me how to do this. I am using a spreadsheet for data so want to be able to rearrange in the order of the columns. How does one do this?
Thanks.
John

I don't want to move or sort the data. What I want
to do is change the order of the columns. I have
columns A through P. I want to move columns M, N,
O, and P to come after A and B so I can see the
information in these 6 columns in one glance.
How does one do that?
One doesn't, but there are altenatives.
1.
Select columns C..L by clicking and dragging across the column headers.
Go Format (menu) > Column width.
Set the width to 0 (zero) and click OK.
This hides columns C..L, showing A, B, M, N, O, P...
You can still enter data into cells in columns C..L by clicking on a cell in column B, then pressing tab to move through the hidden columns.
To restore the display, select columns B..M then reset the column width to a visible value (the current width of column B will be the default).
2.
Copy the values in columns A, B, M, N, O, and P into a set of contiguous columns. Set a New View to show these columns in a separate window.
Example:
Go Window > New View
Drag the new window that opens up and left to cover the initial window.
In AA1, enter =A1
Select AA1..AB1 then Fill right (command-R)
In AC1, enter =M1
Select AC1..AF1 then Fill right
Select AA1..AFn where n is the last row in which you have data then Fill down (command-D)
This copies the contents of the cells you want to view together into a set of cells that are together. You can view them by going to the Window menu and switching between the two views of the same spreadsheet. Or you can skip the step of creating a second View, and scroll from one location in the sheet to the other.
The usual caveat applies: Anytime you're making extensive changes to a document, work with a COPY and keep the original as a backup you can revert to should a misstep along the way result in data loss.
Regards,
Barry

How to change the order of pictures on Apple TV

The pictures shown on the TV are not in date/time or file number order. How do you change the order of the pictures on the screen?

I have struggled with this last year. The sort order of pictures is different in iPhoto, iPad, Apple TV. There are some tricks to get the desired order, but I never managed to get this consistent. The Apple TV has no option for sorting unfortunately.
Maybe things are better now, but I have given up on showing photos using iTunes.
Nowadays I am streaming photos from my NAS and I can show them in any order I want.

How to change the order of entries on the podcast or blog pages?

Hi,
I tried to move entries in the entry area on the podcast page to change the existing order but it seems they stay in the way they were created. Is there any opportunity to change the order of entries after they were created?
Thank you,
Vlad

I'm having the same problem. How do I do this? I just
hit delete entries. So the blog doesn't show up on
iWeb, but it shows up on my website.
This is NOT the same problem.
Clear your browser cache.

How to change the order of cascading prompt?[The prompt at higher level appears at TOP]

Hi Guys,
I have one doubt in cascading prompt without Hierarchy view in UNIVERSE 3.1
While running a report with it.
The prompt at higher level appears below the prompt at lower level.How can we change the order,i.e, I want Level 2 Account Code as top and then Level 3 Account Code ?
It can achieve in hierarchy view,but i don't want to set it as hierarchy view,because there are huge number of Level 2 Account code[Search pattern is not available too]
Thanks in Advance
Shenbu

Hi Sathish,
Thanks for your reply.
I created Cascading list of value as you said only.please find below screenshot for your refefrence.
I think,its tool limitation as "The prompt at higher level appears below the prompt at lower level in report".Can any other way is there to achieve?

How to change the order of phone numbers in Contacts?

Similar Messages

Maybe you are looking for