How to change the order of target message? kindly help

Hi Experts,
I have a source message with fields EmpNo, EmpName, Dept and joining date. The target message has the same structure but fields are in different order. That is, EmpName, Dept, EmpNo and joiningdate.
How to achive the target message with message mapping and without using a different message type for target?
Kindly help
Thanks
Gopal

Hi Gopal,
Try this one.
1. Create Only one message type of target type.
2. Go to XSD tab and export the "XSD" of the message type.
3. Change the <xsd:sequence> element to <xsd:all>
4. Then import the "xsd" in external definitions.
5. Use the imported "xsd" and create Message mapping. Give both source and target the same message type from XSD.
6. just Map one to one.
Now you can get ur required target structure. Since it is <xsd:all> it will accept ur input file.
Regards,
P.Venkat

Similar Messages

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

How to change the order of users in appearance of login screen?

Hello!
Because we often switch to a user,
which is listed last in login screen,
we want move them to the second place.
How to change the order of users in appearance of login screen?
Thank you for a tip
Erhy

The order users show up on the login screen is the way they are ordered under the
C:/Users directory. This is usually alphabetical, AFAIK there is no other way to change the order other than to change the username to something that starts with a letter that will be higher alphabetically.

How to change the order of the fields in the queryoutputnode in OVS.

How to change the order of the fields in the queryoutputnode in OVS.

The actual requirment is to re-arrange the elements of the queryoutput node, to look more organised
say for ex.
Seq 1:
c code company name g/l ac g/l ac description
Seq2 :
g/l ac description c code g/l ac company name
Seq 1 way of representation is more organised that Seq2. How can we achieve this re-arranging of ordering in the queryoutputnode.

How to change the update servers target location?

Hi i just bought a used MacBook from a friend i have been having a problem when trying to use the software update. when i click on software update it says it can not connect to the update server and that i should use network diagnostics. when i click on it it says network seems to be fine but on the left side it shows a red light where server is and says failed i click on run diagnostics and it says "network diagnostics was able to connect to the internet but not to the server "(not showing the server for privacy reasons)" This could be caused by problems with the server, or an internet problem between this computer and the server."
The server name which i did not list was my friends old job server. i just want to know how to change the update servers target location so it will stop trying to connect to his jobs server so it will allow me to update my software from my home wifi thanks

Your friend has configured this computer in some way to prevent a user from accessing Apple's update servers. This was probably done for security purposes. You might check if the firewall has been activated - Open the Security preferences, click on the Firewall tab. If the firewall is turned on, then turn it off. This should fix the problem.
However, if your friend has made other modifications, then you will need to ask him/her what you will need to do to remove them.

How to change the order of the columns in the Message List in Mail?

In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc?
The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard.
Also, there is a column which has a black circle in it. What does it mean? I don't mean the smaller black circle, because that shows which emails been read and which are not yet read.
Thank you.
Lorna

To arrange columns, click on column title (To or From) and drag right or left.
The black dot column shows the type of message. There will be a counterclockwise arrow if the email is a response to a previous email or there will be an icon of a note if the message is a note

How to change the order of download options as per our convience in obiee

hi frineds,
How can i change the order of the download options in obiee dashboard ?
like if you press download option you see
download to excel
download to excel 2000
download data
download webpage(mhtml)
how to change this order.????????

The download options are setup in OracleBI\web\msgdb\messages\viewscontrolmessages.xml
- Search for the tag *<WebMessage name="kmsgEVCDownloadLinks">* that contains the download links within the hyperlink tag
- Each hyperlink tag is a download option
- Reorder as you require
- The actual text that gets displayed as a link can also be customized by editing the entry for a message such as kmsgEVCLinkDownloadExcel in the OracleBI\web\msgdb\l_en\messages\viewmessages.xml [the customization is locale specific]
- Restart the presentation server

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to change the order of the tabs in featured news?

Hi,
I use the 'Featured News' widget on my company website and it has 10 tabs. The newest item is at the top but when I add a new tab it goes to the bottom and I can find no way of changing the order of the tabs so that everytime I add new news I have to copy each tab and it's content down one place in order to get an empty tab at the top to put the new news item in. This takes an unneccesssarily long period of time. Can someone please let me know if there is an easy way to change the order of the tabs?
Thanks very much ;0)
Justine

Just click on the title tab until it is isolated (one click before the text is highlighted) and move the tab to the position you want.
Thanks for your reply. I've done this in the past but found that the position of the tab in terms of it's place in the hierachy doesn't change so if I move the top tab down one, the way you've described and then upload the page I find that the second tab down (which was the first previously) displays first. How can I change the 'position of the tabs interms of their hierachy in the widget?
Thanks again
J

How to change the order of columns in a speadsheet?

It seems this would be completely straight-forward. However I can find nothing in help to tell me how to do this. I am using a spreadsheet for data so want to be able to rearrange in the order of the columns. How does one do this?
Thanks.
John

I don't want to move or sort the data. What I want
to do is change the order of the columns. I have
columns A through P. I want to move columns M, N,
O, and P to come after A and B so I can see the
information in these 6 columns in one glance.
How does one do that?
One doesn't, but there are altenatives.
1.
Select columns C..L by clicking and dragging across the column headers.
Go Format (menu) > Column width.
Set the width to 0 (zero) and click OK.
This hides columns C..L, showing A, B, M, N, O, P...
You can still enter data into cells in columns C..L by clicking on a cell in column B, then pressing tab to move through the hidden columns.
To restore the display, select columns B..M then reset the column width to a visible value (the current width of column B will be the default).
2.
Copy the values in columns A, B, M, N, O, and P into a set of contiguous columns. Set a New View to show these columns in a separate window.
Example:
Go Window > New View
Drag the new window that opens up and left to cover the initial window.
In AA1, enter =A1
Select AA1..AB1 then Fill right (command-R)
In AC1, enter =M1
Select AC1..AF1 then Fill right
Select AA1..AFn where n is the last row in which you have data then Fill down (command-D)
This copies the contents of the cells you want to view together into a set of cells that are together. You can view them by going to the Window menu and switching between the two views of the same spreadsheet. Or you can skip the step of creating a second View, and scroll from one location in the sheet to the other.
The usual caveat applies: Anytime you're making extensive changes to a document, work with a COPY and keep the original as a backup you can revert to should a misstep along the way result in data loss.
Regards,
Barry

How to change the order of pictures on Apple TV

The pictures shown on the TV are not in date/time or file number order. How do you change the order of the pictures on the screen?

I have struggled with this last year. The sort order of pictures is different in iPhoto, iPad, Apple TV. There are some tricks to get the desired order, but I never managed to get this consistent. The Apple TV has no option for sorting unfortunately.
Maybe things are better now, but I have given up on showing photos using iTunes.
Nowadays I am streaming photos from my NAS and I can show them in any order I want.

How to change the order of entries on the podcast or blog pages?

Hi,
I tried to move entries in the entry area on the podcast page to change the existing order but it seems they stay in the way they were created. Is there any opportunity to change the order of entries after they were created?
Thank you,
Vlad

I'm having the same problem. How do I do this? I just
hit delete entries. So the blog doesn't show up on
iWeb, but it shows up on my website.
This is NOT the same problem.
Clear your browser cache.

How to change the priority level of message sent to market place.

Hi to all gurus,
I have rasied a query at market place. I raised the query with medium priority and now want to change it to high or very high priority as user is badly in need of the module for which the query is raised.
How can i changed the priority of this message while I have not yet got reply for the same from SAP and the status is under process.
Thanks and Regards

Hello
The hotline number of your local Support Customer Interaction can be found in SAP note 560499 - Global Support Customer Interaction.
Either phone call or email and they will raise the priority accordingly.
Regards
Michael

How to change the order of cascading prompt?[The prompt at higher level appears at TOP]

Hi Guys,
I have one doubt in cascading prompt without Hierarchy view in UNIVERSE 3.1
While running a report with it.
The prompt at higher level appears below the prompt at lower level.How can we change the order,i.e, I want Level 2 Account Code as top and then Level 3 Account Code ?
It can achieve in hierarchy view,but i don't want to set it as hierarchy view,because there are huge number of Level 2 Account code[Search pattern is not available too]
Thanks in Advance
Shenbu

Hi Sathish,
Thanks for your reply.
I created Cascading list of value as you said only.please find below screenshot for your refefrence.
I think,its tool limitation as "The prompt at higher level appears below the prompt at lower level in report".Can any other way is there to achieve?

How to Change The Order of Songs?

I have an album in my iTunes, and the tracks are in the wrong order. I edited the info for all of them so they all said __ of 11. I also made sure that they had the same exact spelling of the Album. I tried marking it as a gapless album and also as a compilation, and neither of those worked. What can I do?
And on a side note, the newest version of iTunes changed the order of my artists so that artists that start with a number (3 Doors Down, 2Pac, 311, etc) are at the end of the alphabet, after Z, rather than at the beginning, before A. Why did this happen, and how can I change it?

bump

How to change the order of target message? kindly help

Similar Messages

Maybe you are looking for