How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

Similar Messages

Org Management - How can I change the start date of all the org units

How can I change the start date of all the org unit objects and its relationships at one shot ? I have created some 100 Org units with the wrong start date. Please suggest.
Thanks in advance..
Cheers
Vijay

Hello Archana,
Thanks a lot... This has solved my issue...
Cheers
Vijay

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?

First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda

How to change the image dynamically depend upon the input parameter

Hi All
I have one report running depend upon the Organization specific, I have 15 operating unit and 15 different logo for each operating unit.
How to change the Logo dynamically depend upon the input passed by the user.
If I have three or four logo i can add in my layout using if else statement and its works fine but i have more that 10 logos so its no possible to keep these in My RTF Template.
Is it possible to change the logo according to the input without keeping this in Template.
I have seen this link but its not working fine
http://erpschools.com/articles/display-and-change-images-dynamically-in-xml-publisher
Regards
Srikkanth.M

Hi,
I have not completed fully,so sorry i cant able to share the files, could you please give me some tips and steps to do.
Without having the logo in RTF if it possible to bring the logo depends on the user input (Ie Operating unit).
Regards
Srikkanth

How to get PNP Org Structure to reflect the org structure as of key date?

I created a custom program using the PNP logical database. I defined a custom report category indicating the selection period = employee selection period and allowing org.structure. Im also using the standard SAP PNP_DEFAULT selection view.
Inside my ABAP I initialize the pnpbegda and pnpbegps to reflect 20060930. Upon Execution the key date reflects 09/30/2006. I click on the org.structure button. The org.structure displayed reflects the one as of today rather than as of Sept-30.
During run debug I see that the RP_PNP_ORGSTRUCTURE program, LRPPNU11, calls function 'RH_TYPE_STRUC_HELP' to get the org.structure. The call to this function passes 09/30/2006 for the begda and endda, but it still returns the latest org.structure. I did some playing with this function and found that if I also pass the ACT_SEARCH_WEGID as ORGEH it works.
Any idea on how I can get the LRPPNU11 program to pass the ACT_SEARCH_WEGID or the subsequent called functions to process for ORGEH?

thanks. but maybe I don't describe my problem well.
I use javascript to get some information such as position, sytle of each elements and then pass these to javafx. So the besides the dom tree, I can get more information about elements.
I need to pass them back to javafx.
if node support setUserData, I can associate them to each Node/Element. But webkit don't support this feature.
BTW, If javascript pass a object to javafx. it can only deal with primary types such as string, numeric. But I need pass back a complicated javascript object like:
{name:"parent", children:[{name:"child1"},{name:"child2"}]
I can use (String)JSObject.getMember("name"); and JSObject children=JSObject.getMember("children");
but I can't cast children to Object[] or JSObject[].
so I have to use some tricky to convert Javascript Object to json string and then in javafx convert it back to Object tree.
Edited by: user12956197 on 2013-3-11 上午4:27

How to configure the org data determination rule, resp,and profile

Hi ,
Iam doing an Roll out project. I this i need to do the org data determination for this new co code .with out disturbing the existing one , I had already replicated all the master datas like material, customer, pricing,equipment from ecc to crm.
Now i want to determine the org data determination for this new comapny code with out affecting the existing one .
Could any one can help me on this.
Your answer will be really appreciated.
Thanks in Advance.
Mustafa

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to get the query output depending on the current date

i created a region of type "query",inside it created region using wizard of type "table" . in the query i filter the data depending on the current date (taken from dual table) . but still it showing no output on the page. i run the same query in the toad and its showing the 2-3 rows.
If anybody know where the problem is then do inform me.
thanks in advance.

i got the answer by trying out in OAF

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to correctProcess Order confirmation data posted in the previous month

Hi All PP Gurus,
Can anybody tell me the answer of following
How we can correct the process order confirmation data posted in the previous month.

Dear Ashok/Brahmankar,
Actually i am facing the following problem:-
1) If you cancel the confirmation done in the previous month by the tcode CORS, the CO document is posted in the previous period because we cannot change the posting date in CORS. But the previous period is already closed.
Can we change the posting date in CORS manually? Or do you have any other idea?
2) When reading the master data in COR2, I face the error because the status of PO is already set as 'DLV'.
Do we need to read the master data even when the value is changed in KP26?
Thanks,
Narayan

How to change Topic's Icon and show the Print Button

Hi, currently i'm using robohelp html version 8. I have spent quite some time to figure out how to change topic's Icon and show the Print Button in my project. Anyone can help me on this? Btw, i using MX(template) to generate the output with FlashHelp Pro.
Below is the screenshot for clearer clarification:
Thanks.

We would have told you if there was.
Sorry but a downside of FlashHelp is that your customising options are limited.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

How to change keyword in many pictures at the same time?

I gave a big series of pictures the wrong keywords. Now, I can't figure out how to change them (besides one by one...).
If I select e.g. 10 pictures in Library-mode, how to change keywords on them all at the same time?

Make sure you are in Grid View, primary monitor (if you have two), select 10 pictures and type (or delete) the keywords in the Keywording panel in the left upper corner.
Make sure the Metadata->Show Metadata for Target Photo Only is unchecked in the menus. Otherwise your edits will only apply to the primary selected (most selected) image.

I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NL

Did you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go

How to find out which data control do the page layout components come from?

hi,
work in Jdev 11.1.2.3
After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
--i cannot find data control related information in the property pallete for the page layout component.
Regards.

This information can be found in the page definition file.
Select the field in the page and then click the binding tab.

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

How to change the Org Data depending on the Person Responsible?

Similar Messages

Maybe you are looking for