How to change the original system of a CR?

Dear gurus,
we have imported some workbench and customizing CRs into a system B mannually from system A,
there is no transport link between A and B.
But when we want to import those CRs into system C , which has transportation link with B, we can not found those CRs, i guess because those CRs is release on A ,not B.
Could you please help me how to import those CRs into system C, just like other 'normal' CRs?
do i need to modify the original system of the CRs? if so , could you pls tell me how to do that?
thanks and best regards.
Jun

Hi Nicole,
there are many system objects inside our CR, DDIC, FM ...
so we can not change them one by one.
what we are trying to do is to port a custom solution from one system to another,there is no link between them , and in the target system, those CRs can be transport to other systems normally using STMS.
we are trying to include those crs into a new cr in the target system , but failed.
could you please provide more informaiton on how to solve this?
thanks and best regards.
jun

Similar Messages

How to change to original system of an object

We have moved some sources from one system to another and now the
original system in the customers objects is obviously the old system.
How can I change the original system in these objects? Can anyone tell me
in which tables is this info kept and if there are any standard reports to do this?
Thanks
Martin

Thanks for your answer. No, we did not make a copy, but we have included
all objects in transports, which we imported into the new system.
SE06 sets general system setting. We need to change the information for single objects. Only those customer objects which carry the old system as original system need to be set to the new system. Not the SAP-Objects, obviously. I am talking about Z-Reports, subtypes of business objects, Z-Tables etc.
Bye bye
Martin

Not able to change the original system of the object

Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System          Q01   (grey)
Any solution for this ?
thanks

hi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system                                   Target source system
Technical name of R/3 client of test              Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind.

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

How to change the SystemID (system name) of the HP StoreOnce Virtual Storage Appliance (VSA)

I can't seem to find a darned way to post a question regarding the HP StoreOnce Virtual Storage Appliance. I want to change the name (SystemID) of a StoreOnce VSA that has already been deployed. The web interface has NO way of changing any value.
The command line interface (through ssh) doesn't seem to have any way to change the SystemID value in any way. I want to change this value so that when I have it join the Active Directory domain it is a meaningful name, and NOT the serial number of the VSA.
I KNOW that I am asking in the wrong place, but I don't know what the proper place is to ask this question.
Unless you have either of the below keep your comments to yourself:
1) a real suggestion on where to post this
2) an answer to my question

Bill, welcome to the forum.
I believe you will receive the help that you need if you start a thread here.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How to change the source system

Dear Experts,
I have Ecc1 as one of my source systems to BW Quality.Now the client wants to stop the present source system and wants to get the data from new source system i.e. Ecc2. To divert the present flow to new flow.I have looked the previous post regarding the same but are not clear to me. could some one let me understand steps to look into.
Thanks Regards,
Mannu

you need to maintain RFC to the new source system
delete old source system
create source system connection from RSA1
Run BDLS to point the data sources to new source system. This should be run on both BW and ECC.
See the below post
https://forums.sdn.sap.com/click.jspa?searchID=1255799&messageID=2880041
Re: R/3 to BW Connectivity
Re: RFC Connections

Set ZATTR_PROD may only be changed in the original system

Please,
Iu2019ve enhancement the PRODUCT_CUSTOMER2 BADI to change product attribute type when Iu2019m replicating products from ECC to CRM.
When I try to replicate the material from ECC to CRM thereu2019s the follow error:
"Set ZATTR_PROD may only be changed in the original system"
How can I solve it?
Thanks in advance
Edited by: Ronaldo Alvarenga on Oct 25, 2010 11:17 PM

Hello,
Maintain an entry for Z* settype in below path:
SPRO>IMG>CRM>Master Data>Products>Enhancements>Allow Changes to Product Data.
Hope this helps!
Best Regards,
Shanthala Kudva.

How to change the worklist in schedule manager in production system

we are using schedule manager (SCMA) to arrange the daily process in SAP system. but we have to config the worklist and transport it to the production system every time cause in production system if we press edit worklist there would be a message called " TK430 The system administrator has set your logon client to the 'not modifiable' status.Client-specific objects can not be changed in this client."
Is there any way that I can directly change the worklist in production system?
Thanks.
Jiajia

Hi SUN,
Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
and
http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
ps Stop the OMS first.
Eric

How to change the ECC Source system in SAP BI

Dear Experts,
In my BI development system instead of showing ECC development system as a source system it is showing ECC production system.
Now in my BI system I want to change the source system from ECC Production to ECC development.
Kindly explain me step by step to change the source system from ECC Production to ECC development.
Regards,
Suresh.

Hi,
Ask your basis team to change source system entries.
They knows how to assign logical mappings.
Tx - BDLS.
Tables - RSLOGSYSMAP.
Try this way.
Bw, Tx - RSA1-->source system, Menu Tools - Conversion of logical system name and Assignment of source system to source system ID.
Thanks

How to change the language of administrator system message in outlook

I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,

Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to change the sender name "workflow system" to Diff name

Hi ,,
How to change the mail sender name that is "workflow system" to different name. Whenever the mail is triggered it shows the sender name as "workflow system" . i want to change the name of the sender..Even i changed the name of the WF-Batch(name) user but no use.. Pls advice.
regards,
Roops.

Hi Roops,
Check if the following [link1|Re: How to change text of wf batch??] [link2|Update should not happen in the name of WF-BATCH] helps you.
Regards,
Saumya

My ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

my ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

Hierarchy R3PRODHIER may only be changed in the original system

Hi Experts
I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying : Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of DNL_CUST_PROD1 status was green.
And again i try to replicated the DNL_CUST_PROD1 by reguest load which has run successfully and 3 blocks are generated then i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
then i again created a Request load for Object Material and which is run success fully
but my problem is i did not see the new hierarchy and products too in Table COMM_PRODUCT
.and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
i would appreciate you help
thanking you
Regards
Swathi

Hi Swathi,
I'm assuming this development is copied from your production.
For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
After the client copy, basis needs to execute BDLS transaction. This transaction is used to convert the logical systems in all the Database Tables.
     Perform this conversion only for Client Dependent Tables.
     Execute below conversion in CRM Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
      In ECC Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
Regards,
Bhanu

Mass change of the Original System

Hello Experts!!!
We need to do a massive change of the original system to avoid repair tasks. I know that thru SE03 or SM30->TADIR is possible, but we need to do it to all objects in the system.... I think It might exist a standar tool for that... what do you think???
Thanks a lot!!!!
Frinee

Also interesting: transport of copies / relocation of objects
http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e1a94eb711d182bf0000e829fbfe/frameset.htm
Thomas

How to change the original system of a CR?

Similar Messages

Maybe you are looking for