How to change the ownership of a doc after a specific time in workflow ?

Hi
My objective is to create a workflow in ESO , that will change the ownership of a contract document from the current person to his supervisor ( supervisor's id will be in user id management page) after a specific time .
Please help me how to do it ?
I am using TWE editor for workflow design
Regards
Swastik

To prepare a computer for sale or donation, in addition to the steps mentioned in this support article, take these steps:
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you paid for an upgrade OS X 10.7 or later, you must reinstall the original OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.)
The new owner will have to repurchase the software, if need be, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer them either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Similar Messages

HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

Hi All,
Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of 5.   So can any body help me out from this how to change the Useful life in that Asset class. In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
       Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
Thanks in Advance,
Regards,
Siva.

Hi Ashok,
     Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
Thanks in Advance.

How to change the status of an incident, after it is "Confirmed"

Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank you

hi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi

How to change the IO status to CLOSE after it has been settled through ko8g

hi ,
I have the following scenario : An internal order is assigned to a PO and after setllement of such an order i need to CLOSE the order .
The PO has a GR done (no IR) . Currently Internal Order is in the status : TECO [technically complete] and setlement has ben doneusing Actual Settlemnet Run using KO8G.
Now i need to change the IO status to [ CLOSE ] : it is gving an error in KO02 : Balance is not zero .
How to change the Internal Order status to CLOSE or rather how to make teh balance in that Order toZero?
Is it reqd to process some GR's for teh same PO ?
Thansk
Trina

Hi,
Check the order balance in Ko02
Menu --> Extras --> Order Balance if balance exist it means that the order has not completely settled.
Regards,
Raj

How to change the Schema (DB2, Oracle) in CommandTable at run time

Dear all,
I have a problem as below:
I have created report with CommandTable, then I am using Java and CRJ 12 to export data. So how to change the SCHEMA in CommandTable?
Please help me on this.
Ex: CommandTable is SELECT * from SCHEMA.TableA, SCHEMA.TableB
Thanks,
Nha

Dear Ted,
I want to change DataSource, it means the report will be load and change connection at run time (using CRJ SDK) and i want to change the SCHEMA.Tablename in CommandTable in report.
I also use the parameter to do it, but it can not be at run time, just correct when designing.
Could you please help me on this. You can post the code if any.
Thanks,
Nha

Can't change the ownership of a drive after I mount it

Ok so I recently installed Arch on the laptop given to me by my college and it originally came as one hard drive partitioned into two. One was for the operating system which is Windows 7 and data and the other was for storage. I took space from the storage and made another partition for Arch. Nevertheless, I was able to mount the partition with Windows 7 on it but when I mounted the second partition this message came up and tried to change the ownership of it:
mount: warning: /media/Ddrive/ seems to be mounted read-only.
chown: changing ownership of `/media/Ddrive/': Read-only file system
I also tried to mount it with mount -o rw but that didn't help either. Any information will be appreciated.

From the sounds of things if that 2nd partition is ntfs you may need to install the ntfs-3g driver the in kernel ntfs driver tends to only allow read-only mounting.
More info about it can be found here
http://wiki.archlinux.org/index.php/NTFS-3G

HT4889 How do change the ownership of files after using the migration assistant?

After I copied all of my files across using the migration assistant, the tool is nice enough to assume that I want to use the same ID that I had on my PC. This is not my case as I am using a different name on the mac. How do I get the files from the other user name? I have already set the sharing permissions so that I can see them on both user ids, however the only way I can see to update is to copy them all. As I have about 1TB of files, this is a little inconvenient. Any thoughts?

Thanks. It got me on the right track. At the end, I copied the 1TB over and just deleted the other profile. I tried to set the ownership to my regular ID by removing the lock from "Get Info" but I still had to move them out of the other "user" folder.

HOW TO CHANGE THE FINANCIAL TRANSACTION IN FM AFTER POSTING HAS BEEN MADE.

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
HI
IN FM I HAS BEEN POSTED ONE TRANSACTION FOR A PARTICULAR G/L ACCOUNT.
AFTER THAT I WANT TO CHANGE THE FINANCIAL TRANSACTION FROM 30 TO 50.
SUGGEST ME IF ANY ALTERNATIVE WAY.
HOW IT POSSIBLE ?
THANKS & REGARDS
MALA

It's not possible with standard functionality. Create a new CI and use it instead of the one defined incorrectly.

How to change the short text in a model service specification??

Hi,
I've tried changing a model service specification using the transaction code ML11 but couldnt change the short text language from German to English.

Hi
One possibility is to Maintain the languages in the Additional data tab under description in the material master record for your Services . Please check wether both the languages are maintained or not . Please correct me if i am wrong .
regards
kp

How to change the application (MIDlet) input language at MIDlet run-time?

Hi,
I am working on a Messaging (SMS) J2ME MIDlet where it is required to change the input language for a TextField/Area at run-time.
For example if default handset language is set to Chinese, during MIDlet execution time the textfield language (locale) should be changed to Arabic/Spanish/French. Here I understand that provided the required languages are supported on handset, one can change them from handset settings.
Can anyone help me out with changing the microedition.locale to zh_CN from en_US?
Thanks

Dear Ted,
I want to change DataSource, it means the report will be load and change connection at run time (using CRJ SDK) and i want to change the SCHEMA.Tablename in CommandTable in report.
I also use the parameter to do it, but it can not be at run time, just correct when designing.
Could you please help me on this. You can post the code if any.
Thanks,
Nha

How to change the index page of tomcat to a specific page in a web app.

hi all
i am trying to figure out a way to change default application to a specific web application deployed in tomcat, so that when you type localhost:8080, it will start with the web app. basically i want to get ride of the context or map the context to the default page. i.e. map this http://localhost:8080/example/ to http://localhost:8080/. thanks.

maybe i didn't explain myself clearly as to what i needed to do.
i have created a web application and deployed into tomcat 5.5 with a context of "example". the path looks something like this: $catalina_home/webapps/example. in order to access the application, i need to type http://localhost:8080/example in the browser. is there any way to change it so that when i type http://localhost:8080, it will take me to my web application without accessing the tomcat index page.
thanks.

How to get the value of bill doc after creating it using tc VF01.

hi,
i want to get the bill doc no after creating it using BDC tc VF01.
with that no i have to update the ztable.

hi,
i tried with the above mentioned method to get the created delivery no.but i am unable to get the created billing doc no using bdc tc VF01.any idea about this...
REFRESH       tt_bdcdata.
PERFORM bdc_dynpro      USING text-005 text-006.
PERFORM bdc_field       USING text-008
                                text-017.
PERFORM bdc_field       USING text-009
                                text-011.
PERFORM bdc_field       USING text-017
                                wa_worklist-del_no . "wa_created-document_numb.
PERFORM bdc_dynpro      USING text-006 text-007.
PERFORM bdc_field       USING text-008
                                text-018.
PERFORM bdc_field       USING text-009
                                text-019.
CALL TRANSACTION c_t_bill USING tt_bdcdata
                                            MODE c_m
                                            UPDATE c_u
                                            MESSAGES INTO tt_bdcmsgcoll .
SORT tt_bdcmsgcoll BY msgtyp.
READ TABLE tt_bdcmsgcoll INTO wa_bdcmsgcoll WITH KEY msgtyp = c_e.
IF sy-subrc EQ 0.
    LOOP AT tt_bdcmsgcoll INTO wa_bdcmsgcoll WHERE msgtyp = c_e.
      CALL FUNCTION 'FORMAT_MESSAGE'
        EXPORTING
          id        = wa_bdcmsgcoll-msgid
          lang      = text-010
          no        = wa_bdcmsgcoll-msgnr
          v1        = wa_bdcmsgcoll-msgv1
          v2        = wa_bdcmsgcoll-msgv2
          v3        = wa_bdcmsgcoll-msgv3
          v4        = wa_bdcmsgcoll-msgv4
        IMPORTING
          msg       = v_msg
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
      IF sy-subrc <> 0.
      ENDIF.
      WRITE :/ v_msg.
    ENDLOOP.
ELSE.
    READ TABLE tt_bdcmsgcoll INTO wa_bdcmsgcoll WITH KEY msgtyp = c_s.
    IF sy-subrc EQ 0.
      CALL FUNCTION 'FORMAT_MESSAGE'
        EXPORTING
          id        = wa_bdcmsgcoll-msgid
          lang      = sy-langu
          no        = wa_bdcmsgcoll-msgnr
          v1        = wa_bdcmsgcoll-msgv1
          v2        = wa_bdcmsgcoll-msgv2
          v3        = wa_bdcmsgcoll-msgv3
          v4        = wa_bdcmsgcoll-msgv4
        IMPORTING
          msg       = v_msg
        EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      MOVE wa_bdcmsgcoll-msgv1 TO v_billno.
     wa_epit-bill_no = v_billno .
     MODIFY TABLE tt_epit FROM wa_epit TRANSPORTING bill_no.
     UPDATE zsd_dt_epit SET bill_no = v_billno where del_no = wa_created-document_numb .
     IF sy-subrc EQ 0.
     ENDIF.
      MOVE: v_billno TO wa_worklist-bill_no .
      READ TABLE tt_epit INTO wa_epit WITH KEY epi_id = wa_worklist-epi_id epi_sr = wa_worklist-epi_sr.
      IF sy-subrc EQ 0.
        MODIFY tt_epit FROM wa_worklist TRANSPORTING bill_no WHERE epi_id = wa_worklist-epi_id AND epi_sr = wa_worklist-epi_sr.
      ELSE.
        APPEND wa_worklist TO tt_epit.
      ENDIF.
    ENDIF.
ENDIF.
please suggest me..its urgent

I've bought an used macbook pro and want to change the ownership!

Basically i've purchased on ebay a pre-owned macbook pro that hasn't come with the original OS discs and I don't know how to change the ownership!
I've only have the ebay articule of the auction that I won and my credit card resume where I paid for the item that proofs my ownership on the macbook but nothing else!!
I just want to state somehow legally that this macbook is now mine in case i need apple care assistance or anything else (legal matters).
thanks on advance to the whole community!

pre-owned macbook pro that hasn't come with the original OS discs
Which OS was originally pre-installed? You need this information, in order to receive the proper instructions on how to wipe it clean.
Macs that came with the OS'es 10.6.8 & earlier are not suppose to be sold w/o the DVDs that originally came w/them per Apple's license agreement. If this is the case w/you, then you purchased a glorified door stop. The system DVDs have troubleshooting tools on them and they are machine specific.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

How to change the clusterware ownership?

Our initial 10g Clusterware install is currently owned by root. As we upgrade to 11g, I would like to change the ownership. The 11g cluster install guide states that ownership cannot be changed during the install, and I cannot find anything in the 10g documentation about changing the ownership. How does one change the clusterware ownership in a 10g installation?

Thanks. As to "why" I want to change the ownership, it is more of a matter of principle. Keep in mind that my cluster experience is rather low, but it seems problematic for a DBA to have so many root responsibilities in an organization (ie, ours) where those responsibilities are clearly delineated in two different groups. What I also found confusing is that the installation guides make reference to a "crs_user", but I was not able to find much supporting documentation for such a user. Is that the preferred way to go, or is that more of a band aid in the lines of a concession?

Accidently changed the "ownership & permissions" access admin setting to "read only"

In the "Get Info" window on my MacBook hard drive icon, I accidently changed the "ownership & permissions" access admin setting to "read only" & now it won't re-boot the operating system. Just displays the Apple logo & running wheel on a white screen . Any advice on how best to re-set/restore would be very much appreciated, thanks

This might help. Otherwise, it might be necessary to reinstall.
https://discussions.apple.com/docs/DOC-2240

How to change the ownership of a doc after a specific time in workflow ?

Similar Messages

Maybe you are looking for