How to change the Package of planning area and datasource to be transportab

Hi every body,
                   I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
Can any body help me out of this problem.
Can be rewarded.
Shashi

Hi alaxander,
                Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
Regards,
Shashik

Similar Messages

  • How to change the package name for a msg class

    Can anybody tell me how to change the package name for a message class.
    and how will it effect in the rerport?
    thanks in advance
    kp

    >>and how will it effect in the report?
    You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
    ~Suresh

  • How to change the Safety Intervals for standard Content datasources

    Go to RSA2->give your datasource name ->setting up GEN delta
    It shows you whts the safety interval setting.
    <b>
    How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
    Thanks
    Soniya Kapoor

    Hi Soniya,
    1) try  RSA6.....also  RSA8 for additional info.
    2) useful link:
        http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
    Good luck, BB

  • I just want to know that how to change the font color, font size, and forgr

    i just want to know that how to change the font color, font size, and forground color in JTextPane for the Selected text. i try diffrerent menthod like setFont and setColor, these methods change the fonts of the whole textpane. so please reply me as soon as possible, and thanks in advance.
    Moazzam

    Sell the Old one... Buy a New one...

  • How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

    Folks,
    How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
    Thank you.

    Hi,
    You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
    Regards,
    Priya

  • How to change the package in a tansport request?

    Hi Abapers,
                     How can I change the "package" of any TR without deleting the TR?

    Who said ? it is wrong.
    you can change package using SE03 ,it is central.
    Simple example ,you have ABAP Program
    Goto SE03 ->select change object direct entries -> click on execute button
    Select first check box -> enter program name -> execute -> now select Line called R3TR  PROG   Program name -> click on
    object directory  ,Now you are able to change Package.
    You can do other things like Function group,table ,data element ,form and so on
    Thanks
    Seshu

  • How to change the package for a report

    Hi can any body tell me the steps to change the package name of a report?
    thanks in advance
    kp

    If you are working on 4.6C,
    Go to SE03-> Object Directory -> Change Object Directory entries
    Execute
    Under Selection by objects give Program of report- click the check box which is there before the program name execute...u will get one more screen
    then place the cursor on the program name of hierarchy and then click the button 'Object directory' which is there in the application tool bar.
    then change the development class.
    I hope the above procedure will help you out.
    Regards,
    Sree
    <b>"Give rewards if this answer helps you out"</b>

  • How to change the field 'Current Planning Period' in xRPM portal?

    Hello All,
    In xRPM portal, under portfolio management --> financial planning, we have a field 'Current Planning Period'.
    Can anybody tell how to change the values of this field for all the projects/items at once?
    Also, when I am trying to change for individual projects. its opening the F4 help but not  selecting the date on which I double click.
    Thanks
    Niti.

    No, you cannot add another vPC peer-keepalive configuration.
    Taking down vPC peer-keepalive will not affect your vPC peer-link and vPC operation. It will be a problem if and only if vPC peer-link went down after the peer-keepalive is down first, this will cause dual active.
    Regards,
    jerry

  • How to change the package name of View or Window

    Hi all,
    i have created the Webdynpro Application.i have some Views and Windows in the WebDynpro Peoject.i want to change the package Names of Views.is it possible???
    thanks in advance
    regards
    Naidu

    Hi Naidu
        Though you rename the package name, the view in that package refers to the old package and hence that view can be used in other views by including the old package name only. Renaming doesn't have significance that you expect. You can create a new package and views in it and copy the implementation of views from the old package to the views in the new package.
    Regards
    Vijayakhanna Raman

  • How to change the default currency in CJ32 and CJ33

    Dear all,
    As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
    Could any one help me? Points will be awarded.
    Thank you.
    Christina.
    Edited by: Virendra Pal on May 5, 2010 8:34 AM

    Hi Christiana ,
    Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
    Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
    Regards
    Judy

  • How to change the font size of text and case in smartforms

    hi,
       could any one explain how to change the font size of text in smartforms. ex. previously i had taken P4 left aligned and C6 but now i want to decrease the font without making it bold. pl......... guide me
       secondly the value which are coming from tables are upper case but i need lower case. pl. guide
    thanking u

    check out the smart styles...create a font of ur size n use.
    Define the paragraphs & character formats using SMARTSTYLES & use them in your smartform.
    You have to give the smartstyle name in the Form attributes-->Output options for the formats to be used in your smartform.
    You can define font size in Smartform Style.
    Smartform Styles > Charcterformat> Font --> size.
    to load the font to SAP server chk this
    Re: Adding a new font for SAPscript/SMARTFORM output
    Regards
    Vasu

  • How to define the size of report area and its elements?

    How can I define the report area size and its elements? And how can I define that for each printed paper, the details area will repeat horizontally or vertically?
    Is there any way to change the measuring units?
    Are there any difference between Crystal Reports that is bundled with Visual Studio 2005 to the standalone version that don't allow me doing what I need?
    Thanks.

    Hi Juliano,
    I hope this is what you had in mind...
    1.  File / Page setup: set your paper size, portrait/landscape and margins.
    2.  Section Expert: the page header &footer sections are 'locked' in that each page will have the space indicated dedicated to these sections; report header & footer - this is the space dedicated on the first and last page of the document. The remaining space available will be used up by the Details section.
    I'm not sure how you can get the Details to print verticall vs horizontally - except maybe with cross-tab format.
    3.  Measuring units: is this for the ruler? This is pulled from your computer settings.
    The rest I'm not sure about but I hope this is enough to get you started!
    Heather

  • TS1702 How do change the old Apple ID username and password to the updated username and password for the apps store?

    How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?

    cbkitche wrote:
    How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
    Do you mean you kept the same account but you only updated your AppleID?
    Just log out and log back in with new ID.
    Note that the AppleID is embedded into the item at purchase and cannot be changed.
    However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID.

  • How to change the R/3 transac Look and feel in portals

    Hi Experts......
    How to change the look and feel of the R/3 transactions in portals.....
    I need to change the color of the screen display and nodes.
    Is there any easier way to do that....Kindly provide the inputs...
    Thanks in Advance,
    Jasmine

    Hi Jasmine,
    generally you have to "Theme Editor" in the portal which allows top level customization of design elements/ colours for the R/3 applicatins to be integrated into the portal.
    Changed designs on a deeper levels for ITS can be done with SAP@Web Studio. Kindly check the help for further information.
    Hth,
    Michael

  • How to restric the use of Business Area and Plant in PTC module

    Hi Expert,
    I am facing a problem with restricting the use of Business Area and Plant in PTC module.
    In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
    We have applied same authorisation in the PTF module.
    Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
    Note: We have already inserted two authorisations object manually -
    1) F_BKPF_GSB
    2) A_IMPR_GSB
    but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
    Regards,
    Venkatesh

    Hi,
    have you done OMJ7?
    Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
    Regards

Maybe you are looking for

  • Can't get airport extreme to configure as primary or secondary unit in net

    hi after my network of various bits & bobs went bottom up i decided to remove everything non-apple. i want to now try connecting my A/extreme to the cable modem and then use: The ethernet ports to wire in 2 PCs (wife's ) and a network HP Laser. The w

  • DVI video out to component

    Hello! I was recently looking for something to send DVI to video (and not have it be a $3000+ box) I found the following: http://www.gefen.com/kvm/product.jsp?prod_id=3176 Is this something that would work out of the stock ADC/DVI card that comes wit

  • Can I delete Receipts.pkg files? For Permissions repair, verify first?

    I recently read that all *.bom (/Library/Receipts/boms/*.bom) files should be preserved so Mac os x knows what files an installer put into which location. But what about those large .pkg files (/Library/Receipts/*.pkg)? Those take up more than half a

  • Freight condition type-With respect to Delivery Item (per PC)/Volume/Ship-to party 's region

    Hi Gurus, I am working on freight related condition type,my requirement is we have to calculate freight cost based on Delivery Item (per PC) / Volume of that Material (Per PC) and Destination Region of each Delivery Order. for example: If Material '1

  • Photos for Wallpapers

    I have a folder in my iPhoto that I use as my "Wallpaper Bank". I am regularly adding to it. I have it on my settings in System Prefs to change the photo for my desktop every time I log in. Both my laptop and my secondary display are set to do so, an