How to change the path of sysprep files that were copied to reference computer when i capture the image from reference.
Dears ,,
how to change the path that sysprep were copied to reference computer when i capture the image from reference.
Should i modify some codes in LTIAPPLY.wsf? how to modify it?
Thanks.
Sysprep and capture has *Three* steps.
1. Run sysprep on the local machine (easy).
2. Copy WinPE down to the local machine so we can reboot into winpe for capture.
3. Capture the drive in an *offline* state from within WinPE.
What is most likely happening is that you are having problems with step #2. 100MB is *WAY* too small to copy down WinPE. By default MDT will make this System partition much bigger, 499MB. IF you install Windows 7 from the default media. IT will only create
a 100MB partition.
By default MDT 2012 Update 1 and greater *should* recover to a fallback drive with the OS on it, however if you are running older versions that might not happen correctly.
If you are still having problems, copy your BDD.log file to a public share like OneDrive and copy the link here.
Keith Garner - keithga.wordpress.com
Similar Messages
-
When a song has Album Only where the price should be does that mean I'll get it when I purchase the entire album in iTunes?
yes
-
I have a lot of tapes that cut in the middle while recording more than 12 minutes. I would like to join/merge my files. What should I do? Which softwares should I use?
Because I don't have any of Sony's softwares, or softwares that they use, I can't help much on that side of things, but programs that I use are
Freemake Video Converter to convert it into a format that VirtualDub can read, then use VirtualDub to load up the first file, then use the Amend AVI to add the next file that you want to merge, and keep going until you're ready.
Then I check the video and audio compression, make sure they're on full compression, choose the codec and video bitrate, and audio bitrate that I want, and save.
I'm sure Sony's programs, or the ones they use, make it much easier. Try PlayMemories and Sony Vegas, they'll work with the AVCHD files without too much extra converting (and if it does convert, it's all in-program so should be much easier) -
How do I get back my downloaded files that were deleted through terminal?
After taking advice from another discussion which was supposed to help me change the 'Invisible' file to being visible my tv show downloads deleted.... how do I get them back?!?!
You can try something such as Data Rescue 3 to see if you can undelete the files - I've had good luck with it and can recommend it. You may or may not be able to recover your files, depending primarily on whether the files have been overwitten or not.
Good luck,
Clinton -
The difference of jar files that were generated from wsdl
hello there:
I used maven's jaxws plugin to generate jar files from two wsdl links. The links are pretty much the same except for one line:
<wsdlsoap:address location="http://<env>.XXXXXX"the <env> indicate the environment is a prod or uat. Other than that, the wsdl is the same.
The question is, can the jars generated from respective wsdl be used interchangably? I did notice there a few bytes different from the resultant two jars, and the test shows they CAN'T be used interchangably.
Can anyone explain why?
Thanks,
JohnnyYou may use them interchangeably if the code that uses the classes in the jar(s) does not depend on the default address of the web service but instead always passes the URL during initialization of such stub classes.
-
clean SC 2012 R2 RTM.
1. had problems with WSUS installation/post configuration
2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
I followed the suggestion: reinstalled WSUS using ps and wsusutil.
I canceled WSUS configuration at recommended step. Everything looked fine.
But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
Any suggestions for fixing this.
Thanks.
Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~ at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~ at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~ at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~ at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~ at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~ at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~ at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~ at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~ at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~ at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis>Any Errors in SUPSetup.log and WSUSCtrl.log log files?
No errors in these files. As I mentioned there is no Schema folder in Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~
Here are 3 repetitive errors in WCM.log:
1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~ at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~ at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~ at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~ at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~ at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~ at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~ at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~ at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~ at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
2. Failed to publish client with error = 0x80070003
3. HandleSMSClientPublication failed.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis -
How do I restore files that were backed up by Adobe?
How do I restore Files that were backed up by Adobe?
Where is the back-up e.g. on removable storage such as CD, DVD or external hard drive?
If the files are on Photoshop.com, then Elements can sync them back down, by following these steps:
Launch the Elements program.
Login to your photoshop.com account
Open Organizer
On the menu click Edit à Preferences à Backup/Synchronization
You should see all of your albums and media files on your photoshop.com account.
Mark those checkboxes that you want to restore to your computer.
Click OK.
N.B. Elements can only sync files back down to your hard drive which reside in albums on Photoshop.com -
Hi all,
when a create a SQL Server Project using "File > New ...", I find the following settings defaulted:
SQL Server is (local)\Version12.0 and
DefaultDataPath, DefaultFileprefix and the DefaultFilename(s) for MDFs and LDFs point to the Project directory.
Initial settings of file size and increments are also not settable but defaulted.
Because my projects have to verify performance by testing with large volume of data, we have to use a different SQL Server with files stored on that Server. The Project settings have a button to changes DB properties, but these are not part of that
dialog.
So I spent some fruitless hours in vain to find a way to change the project's connection to my development SQL Servers.
How to cope with that?
Thanks in advance.
Regards UweHi Caillen,
thanks for Your response. I have to apologize for being a little late with my answer. I'll try to clarify my case more precisely:
This is surely a topic related to VS2013 handling new "SQL Server Database Projects". When one clicks "OK" the following steps are executed by VS2013 (surely controlled by standard templates or the like):
VS2013 creates the new project in a selectable directory and uses the projectname as a subdirectory whre the directory elements (*.sqlproj, bin\, obj\) where later all the *.sql are placed, too. This is normal and expected.
VS2013 creates a new database with its DB-files
and attaches it to "(localdb)\ProjectsV12". The name of the database is the name of the project. The path to the DB-files (*.mdf and ldf) and their sizes are also defaulted to small values. The DB-server and the
path to the DB-files is taken from the registry (!) HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0\SSDT\LocalDbDatabaseFilePaths. I don't know when and by what tools these values are set.
The path to DB-Files is typically also the path to the projects. The (local)-server places all system database files in the User\<user-ID>\Appdata\.. tree. Which is OK for small databases. The templates extracts some data from the DB-file path and
places it in the deployment SQLs to populate the SQLCMD variables DefaultDataPath, DefaultFileprefix and the DefaultFilename(s) which are generated when pressing "Executed" or "Debug" the project.
My problem is that we have to test database performance with larger volumes of data (e.g. two million rows and more). These cannot be stored in the User-path but must be handled by some kind of professional DB-Manager on various storage devices. When everything
is tested, the publishing function of VS2013 will extract the structure and you are done incl. all the performance taming things.
The dialog from the project properties can change to a different Server, but that server does not know your project database. The server and the DB-Files should be specified by the developer before VS2013 creates the database.
So the right forum would be a forum, where people developing SQL Server solutions with VS2013 are reading the questions.
Thanks again for your patience.
Regards Uwe -
how 2 get the path of a file Using jsp
i have tried getPath...but i'm geting the error
The method getPath(String) is undefined for the type HttpServletRequest
any idea how 2 get the path of a fileYou need ServletContext#getRealPath().
API documentation: http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String) -
How 2 get the path of a file Using jsp
how 2 get the path of a file Using jsp
i have tried getPath...but i'm geting the error
The method getPath(String) is undefined for the type HttpServletRequest
any idea how 2 get the path of a fileYou need ServletContext#getRealPath().
API documentation: http://java.sun.com/javaee/5/docs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String) -
F4 Help to get the path for a File source directory
There are numerous function modules for browsing a particular file in desktop and getting the file path (including the fine name) , like F4_FILENAME , KD_GET_FILENAME_ON_F4 , WS_FILENAME_GET etc. But can anyone tell me how to fetch only the directory path to the field were the F4 help is given. Actually the filename has to come in some other field in the selection screen. Is there separate funtion modules for these OR will changing parameters in the above function modules work?
Pls Help....
Also are there function modules for providing F4 help for getting the path to a file in application directory?Try this method CL_GUI_FRONTEND_SERVICES.
It is a Global CLASS which is having different methods for different purposes
see the documentation of it and use the methods of it
see
CL CL_GUI_FRONTEND_SERVICES
Short Text
Frontend Services
Functionality
The class CL_GUI_FRONTEND_SERVICES contains static methods for the following areas:
File functions
Directory functions
Registry
Environment
Write to / read from clipboard
Upload / download files
Execute programs / open documents
Query functions, such as Windows directory, Windows version, and so on
Standard dialogs (open, save, directory selection)
Example
Determine the temp directory on your PC:
DATA: TEMP_DIR TYPE STRING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
CHANGING
TEMP_DIR = TEMP_DIR
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2.
IF SY-SUBRC 0.
Error handling
ENDIF.
flush to send previous call to frontend
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC 0.
Error handling
ENDIF.
WRITE: / 'Temporary directory is:', TEMP_DIR.
Notes
The class CL_GUI_FRONTEND_SERVICES is based on the Control Framework. See the documentation for more information, in particular on CL_GUI_CFW=>FLUSH which must be called after many CL_GUI_FRONTEND_SERVICES methods.
Migration Information
The old file transfer model was based on function modules of the function group GRAP. The old features have been replaced by the class CL_GUI_FRONTEND_SERVICES. The following list contains the old function modules (italic) and the new methods (bold) that replace them:
CLPB_EXPORT
CLIPBOARD_EXPORT
CLPB_IMPORT
CLIPBOARD_IMPORT
DOWNLOAD
GUI_DOWNLOAD, dialog replaced by FILE_SAVE_DIALOG
PROFILE_GET
No replacement, use REGISTRY_* methods instead
PROFILE_SET
No replacement, use REGISTRY_* methods instead
REGISTRY_GET
REGISTRY_GET_VALUE, REGISTRY_GET_DWORD_VALUE
REGISTRY_SET
REGISTRY_SET_VALUE, REGISTRY_SET_DWORD_VALUE
UPLOAD
GUI_UPLOAD, dialog replaced by FILE_OPEN_DIALOG
WS_DDE
Obsolete: This function is no longer supported.
SET_DOWNLOAD_AUTHORITY
Obsolete: This function is no longer supported.
WS_DOWNLOAD
GUI_DOWNLOAD
WS_DOWNLOAD_WAN
Obsolete: This function is no longer supported.
WS_EXCEL
Obsolete: This function is no longer supported.
WS_EXECUTE
EXECUTE
WS_FILENAME_GET
FILE_SAVE_DIALOG, FILE_OPEN_DIALOG
WS_FILE_ATTRIB
FILE_SET_ATTRIBUTES, FILE_GET_ATTRIBUTES
WS_FILE_COPY
FILE_COPY
WS_FILE_DELETE
FILE_DELETE
WS_MSG
Obsolete: This function is no longer supported.
WS_QUERY
CD (current directory)
DIRECTORY_GET_CURRENT
EN (read/write environment)
ENVIRONMENT_GET_VARIABLE
ENVIRONMENT_SET_VARIABLE
FL (determine file length)
FILE_GET_SIZE
FE (check if file exists)
FILE_EXIST
DE (check if directory exists)
DIRECTORY_EXIST
WS (determine Windows system)
GET_PLATFORM
OS (operating system)
GET_PLATFORM
WS_UPLDL_PATH
Obsolete: This function is no longer supported.
WS_UPLOAD
GUI_UPLOAD
WS_VOLUME_GET
Obsolete: This function is no longer supported.
Reward points if useful. -
How can I take the files that were migrated from my PC to my Mac and add all those files to my current user instead of having 2 users? Having to log out just to sign in on a different user to access the files is absurd.
Do I make all the files sharable to all the NOW users on the mac then just delete the files? Or can i erase my account that I made when starting up my new mac and then just use the one with the transferred files?
I just dont want to have to og in and out of 2 different accounts .. Help please.
-NinaSorry. /Users is a folder path. It would be similar to C:\Users (if that exists on Windows).
So, in the Finder, select Computer from the Go menu.
You'll see Macintosh HD, double-click that to open it.
In there you'll see several folders. One is Users. That is where all the user Home folders exist. Select the other account's home folder and go to step 3.
If you have any more confusion, please stop and ask. We'll get there.
If you feel more comfortable, you can just log into that other account and move the files into /Users/Shared.
Then, log into the account you wish to use and copy the files from the Shared folder and paste them into your Home folder, wherever they belong, Documents, Music, Pictures, etc. That just takes a little more work. Transferring them into Shared, and then copying into your home sets the permissions on the files so that you won't have a problem accessing them later. The steps I provided just prevent you from having to do the double move, since you are not going to use the old account once you are done.
Quick unix shorthand. If someone gives you a file path that begins with a /, that means the root of the hard drive, ie Macintosh HD (if you haven't renamed it). The path separator in unix is /, not \.
A path that starts with ~/ means your Home folder, the one inside /Users named with your account name. -
I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipodI reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.
-
Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.
I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.
-
I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?
Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!
Maybe you are looking for
-
MBP 2.4Ghz Penryn Magsafe LED light randomly on/off w/ sporadic charging
I have one of the February 2008 MacBook Pro's with 2.4Ghz C2D. I have had this thing for only 5 days and have noticed that the charging behavior has been sporadic. Sometimes i plug in my MBP and the amber light illuminates to indicate charging, and 1
-
How do I move my iTunes library to an external harddrive?
I recently purchased a new MacBook Pro and want to reload by CD collection into iTunes on an external drive. In the past, I had been using iTunes for PC and the library became corrupted. I would prefer to save the music to an external harddrive to
-
I just brought a movie from itunes on my iphone and im trying to sync them onto my mac so they can be in my itunes library, how do i do this?
-
Address book not syncing with Office 365
I use Office 365 as my primary work email. I have elected to sync my Office 365 address book with my MBA running 10.7. Most of the time it works OK, but I often get an error sign next to the Office 365 group in the Address Book. The error generally s
-
Installing new version 6 with version 5 on the machine
Can I install the new JDK version 6 and still leave my old version 5 on the machine? I would like to be able to use both of them for a short while. Thank you.