How to change the port in the URL of a BSP Iview

Hello,
we have several appraisal templates released in our R/3 system and we can access them by the portal.
We are changing our systems and we are implementing a load balanced in order to improve the connections with the portal. So we need to know how can we change the port of the server that appears in the URL when we go to MSS ->teamviewer and select one appraisal to see the information of the template.
We need to change it and indicate the port of the load balanced http://emsapl404pre.endesa.es:8000/sap/bc/bsp/sap/hap_document...) not the port of one of the WAS server as we have now http://emsapl404pre.endesa.es:8302/sap/bc/bsp/sap/hap_document...)
Thanks in advanced.
Best regards.
Seshen

Hi,
Just view any BSP Application in SE80 and the click on Utilities(M)->Settings.
This will fgive you option to change URL and port number of the URL..
It will be under the Business server Pages tab in the settings window.
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

Similar Messages

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

How to change a connection with the database in Runtime?

How to change a connection with the database in Runtime?
My connection was made using ADF Business component (ApplicationModule).
ADF Swing.
JDeveloper Studio 11.1.1.4.0.

When deploying ADF applications with database connection, you should be using JDBC data sources configured in the weblogic server.
You could change the JDBC data sources to a different DB instance or location - by changing the JDBC data source and restarting the weblogic server.
For more details, check
http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/
Thanks,
Navaneeth

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

How can I open the ports with the Airport Extreme?

I have an Airport Extreme Base Station connected to a cable modem and I want to open the ports for the two Playstation 3's I connected to the Airport Extreme via Cat 6 ethernet cable. The first Playstation 3 will be used to play Call of Duty Modern Warfare 2 and the other Playstation 3 will be used to watch streaming movie from Netflix. Does anyone know if this can be done?

It is documented on Page 54 of Apple's "Designing
AirPort Networks Using AirPort Utility Mac OS X v10.5 + Windows" (direct PDF download link).
The public port and private port would be set the same value.

How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
Mac os x 10.9.2. ; Garageband 10.0.2

There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

Specify the port in the client in a TCP connection

Hi,
I am programming an application using TCP sockets. I have programmed a server whith a SocketServer(port) and is waiting for client's requests (the server is a public host in the Internet). The client connect to the server by means of the method:
Socket s = new Socket(host, port);
That works correctly, but now I want to specify the port in the client. The client's PC in a machine on the Internet and it has a public IP. I tried to use the method:
Socket(String host, int port, InetAddress localAddr, int localPort)
where localAddr is the local IP of the client' PC (because I cannot know the public IP).
However, it doesn't work this method and the client cannot connect to the server. The problem is that I want to specify the port in the client in the socket TCP connection when I try to connect to the host.
How can I resolve this problem?
Thaks

I want to specify the port in the clientWhy?

FIND THE PORT OF THE ECC BI

Hello:
   Our company has installed a portal through which we can access ECC,BW,SRM and XI, now I have to find all the ports that enable the frontenduser to access the portal ,ECC,BW,SRM and XI, no matter though the SAPGUI,webgui,or thought the protal.
additional we have installed the web dispather.
here is my solution: for ECC -->   i can find the port though the LOGON DATA (SM51->SERVER NAME->INFORMATION-LOGON DATA). the same method can be used for the BW SRM AND XI. can i finish my job by doing this? if yes, is there some easy method? if no ,please give me some advice.
and about the portal, please give me some advice!!!!
THANKS A LOT!

thanks for your reply!
     as you said,the port is relative to my instance num,is that mean if my instance is 00, the Dispatcher port of that instance must be 3200,it can not be modified? i just to want to make sure, they are not changed.
     and i use transaction smms->logon data->display,there are a list of logon types,
logon type      hostname     port
dialog xxx.xxx.xxx 3200
rfc xxx.xxx.xxx 3301
http xxx.xxx.xxx 8001
does that mean i can only assess the system though those ports?
thanks a lot!

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. WHen we plugged it into the port on the keyboard, the device works. Why?

A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port. When we plugged it into the port on the keyboard, the device works. Why? Obviously the device is operational. Could the USB port have burned out from having too much power drawn? If so, is it reparable?

It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

What is the port on the very front of my Macbook Pro and also right next to DVD slot?

For some reason the description of external I/O ports on this website only details the ports on the left side of the Macbook?

1. If you have two small round ports at location 1, one is audio out, indicated by the headphone Icon.
The other is audio in/out, indicated by the two speakers superimposed on a circle icon.
2. If you have two ports at location 2, one is the Sleep/Wake indicator
The other is the IR receiver port.
3. In addition to the obvious huge DVD reader slot
The Security slot, compatible with the Kensington locking system.
These are all pictured and described in your Manual.

Can someone tell me how to change obj file in the applet

Thanks in advance.
I have try to use the ObjLoad example in the java3d demo to
change the obj file.But I fail to do this.
I had use twe applet,one to change name,and then refresh the other
frame to try to relod th obj file. but
java.lang.NullPointerException
at ObjLoad.init(ObjLoad.java:150)
at sun.applet.AppletPanel.run(AppletPanel.java:348)
at java.lang.Thread.run(Thread.java:536)
can you help me?
thanks

Sun's Java3d FlyThrough Demo & Java3d Scenegraph Editor
allow you to load mutiple 3d files (sequencially) including VRML
files with the Sun VRML Loaders at run-time
-- and the Java Source Code is free --- ( see below )
First, try a Web Demo of the "Appearance Explorer" :
"Appearance Explorer" Java3d Web Applet, Loads multiple ".obj"
http://web3dbooks.com/java3d/jumpstart/AppearanceExplorer.html
- click on "Data"
- click on "Obj File: Galleon" -- or -- "Obj File: Beethoven"
- rinse, rather, repeat.
|
http://web3dbooks.com/java3d/jumpstart/Java3DExplorer.html
http://web3dbooks.com/java3d/jumpstart/J3DJumpStart.zip
| ^-- free source code
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
| Sun's Java3d Scenegraph Editor showing a Nasa VRML model
| --------------------------------------------------------
|
| uses the Sun VRML Loaders, source code available and is free.
|
| [ at this url: ] http://java3d.netbeans.org/j3deditor_intro.html
|
http://www.frontiernet.net/~imaging/terrain_rendering.html#Scenegraph_Editor
http://www.frontiernet.net/~imaging/terrain_rendering.html
Selman wrote a Java3d book that was well received
and has a Swingtest.java applet and application that
allows you to load objects dynamically,
ie. "change" the viewed object when it is running by
allowing the user to select "sphere" or "cube" from
menu lists ( in this case it's not just displaying
Jav3d primative objects, but it has the core functionality
of deleteing and adding nodes in the scene graph that you
are seeking, and at that point the rest is left as
exercise to the student. The ObjLoad.java in Sun's Demos
directory has the code to load ".obj" files, so you have
all the tools you need.
| Picking of VRML objects with your mouse is demonstrated
| in a new book, Java 3D Programming, by Daniel Selman
| ( shown on the left ).
|
| The source code is avaible for free.
|
| [ here: ] http://www.manning.com/selman/selman_source.zip
|
| This new book uses the old, reliable Sun VRML Loaders for Java3d.
|
| The program reads a 3d scene as a simple VRML text file,
| and displays the Java3d Scene Graph ( which is interactive,
| you can expand and collapse the branches of the scenegraph
| and examine the contents of the nodes ), it renders the
| 3d scene, and when you click on an object it tells you
| what you clicked on.
|
| You can see ( and download ) the Java Source code of
| the operative file: VrmlPickingTest.java
|
| The publisher's site has more informatation on the book.
|
http://www.frontiernet.net/~imaging/games_with_java3d.html
http://www.frontiernet.net/~imaging/sourcecode/VrmlPickingTest.java
The Prentice-Hall books by Aaron Walsh are false & fraudulent
in their claims to present the most current methods, as a part
of the "Couch-Beiter Flame War" and fraud involving Sandy Ressler
at the NIST. Prentice-Hall, Yumetech.com and Aaron Walsh have
misrepresented and disparaged the old & reliable Sun VRML Loaders
in favor of the "new" Yumetech.com Loader, and the web demo above
__ DOES NOT __ load Web3d.org's __ VRML __ files, only the less
capable ".obj" files ... so the "Web3d" series of books from Prentice-Hall
does not show the loading of ___ Web3d.org 's ___ VRML __ files
because Sun's VRML Loaders were the best ones, and the Yumetech.com
folks didn't want anyone using those, and started the "Couch-Beitler Flame War"
to disparage, falsely & fraudulently misrepresent the facts and knowingly
published false and misleading "disinformation" in the
unreliable Prentice-Hall / Pearson Ed books, harming our community.
The Sun VRML Loaders are used by __ Nasa, __
the NSF supported Virtual Chemistry Lab ( "Lab3d" ),
me, and others simply choosing the "what works best",
and by people using Sun's Java3d FlyThrough & Java Scenegraph Editor.
symsan wrote:
|
| Thanks a lot,but can you give some code
| about to change the Obj file or vrml file,
| when the user in the browser to choose
| the file or input to the textField ?
|
I misunderstood the original question ( it was too terse ).
I interpreted the question has how to change the loaded
objects --- between successive runs of the program ---
and not as you intended -- dynamicall while running
the program program without quiting & restarting.
In a "Java3d" forum I'm not going to wander into
how basic ( non-Java3d) 2d commonents such as TextFields
are programmed.
The original Vrml97Player.java file that came with
Sun VRML Loaders also implemented the functionality
of loading mulitiple files ( sequentically during one run )
and I have worked with that and similar things with
the Shout3d.com engine and my own 3d Java engines.
-- Paul, Java Developer & Web Animator
Imaging the Imagined: Modeling with Math & a Keyboard

OEM Can't get to database after changing the port on the database

Hello OEM Gurus!
I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
I then clean started the Agent on the server but I get the same results.
OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
How do I tell OEM to update the port ?
Thanks for you help!
Edited by: sawright on Mar 29, 2012 10:33 AM

Success
The connection test was successful.
=============
Information from Review Screen:
Name Value
Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
Monitor Username dbsnmp
Monitor Password ******
Role NORMAL
Listener Machine Name urora2t.unioncentral.com
Port 1526
Database SID finapp1t
Preferred Connect String
Edited by: sawright on Mar 29, 2012 11:24 AM

How to change podcast settings in the Application options dialog

I have attempted to subscribe to an RSS feed for a podcast - URL is http://www.abc.net.au/triplej/kingsmill/rss/podcast.xml
I am being prompted to join using live bookmarks. As i use Google reader, there is no option available to change it to google. Hitting the dropdown arrow, my choices are live bookmarks or Microsoft Outlook - or browse for application. How do i change / remove the applications entry for RSS so i can start over and select Google as a default
The Options / Application / Podcast - has the RSS logo - says "preview in firefox"

Apple does not make what you are asking straightforward for a reason: the user usually sets the system language to the one they prefer anyway.
If you think you have a good reason for setting the language in the application itself, I would suggest using the pathForResource:ofType:inDirectory:forLocalization: method of the main bundle to get the applicable strings file and then deserialize it into a dictionary as if it were a plist (strings files actually are).

How to change Font Type of the Title Text of a JFrame?

Hi,
I want to set a different Font Type for the Title text of the titlebar of my JFrame.
Is it possible? Can anyone show me how if it is?
Thanks.
Niteen

Michael,
Thanks. It works!
But there was a problem. I was not using the :-
JFrame.setDefaultLookAndFeelDecorated(true);
so I have to use it now.
Is it possible to do it without the default decorated look and feel? Because the default LNF title bar has too much height and I am cramped for space.
I know that's no excuse. I tried but it doesn't work.. I am using a extended JFrame like this:-
class Testing extends JFrame
public Testing()
setSize(300,100);
setLocation(400,200);
Container container = getContentPane();
/* add components to this container here */
setVisible(true);
When I use getComponent() for the container, I get an ArrayIndexOutOfBound Exception.
When I set the argument to getComponent(0), the font in the title bar is not changed.
What else should I do?
Thanks.
Niteen.

How to change the port in the URL of a BSP Iview

Similar Messages

Maybe you are looking for