How to change the Portal Password using a link from Web dynpro application
Hello Everybody,
I have a requirement to change the user password from a web dynpro application which is available on a mobile device. Firstly User will log into the portal through a mobile device and after getting authenticated user will be redirected to the mobile application. Within this mobile application there will be a link to change the login password(Portal login). Can somebody tell me how can i change the portal login password from a link available within the mobile application. Looking forward for a suitable reply.
Thanks to all,
Regards,
Saby.
Hi Maksim,
Thanks for your reply..but i would also like to know can we directly use the Change Password Iview "persoUserPassword" from the portal. Can i directly Pass the URL of this iview from the portal to a "Change Password" link in the web dynpro application, so that when the user click this link he should be able to see this Iview on his/her mobile device and should be able to change the password from there. But i dont know whether this iview will appear properly on the mobile device or we have to have a custom web dynpro application for this purpose...Please reply with a suitable answer.
Thanks in advance.
Regards,
Sarabjeet Singh.
Similar Messages
-
How to change the background color of a view in Web Dynpro?
Has somebody an idea how to do that? Also is it possible to change the bg of a TransparenContainer?
i think you cannot do that with transparent container.
try with group. color option is also very limited. -
How to change the portal user id 's assigned employee in ESS configuration
Hello Gurus,
I now have a question related to ESS configuration. I want to know how to change the Portal user's pernr assignment in the ECC 6.0 system. Somebody had actually assigned my portal user ID a PERNR in the ECC 6.0 system. But now, for test purposes, I want to change the PERNR assignment to something else for my portal user id.
Could any of you please guide me in doing these steps?
Points will definitely be awarded for helpful answers.
Thanks gurus in advance for your help.
~~LBHi Leena,
You can create a new user name with the username and password assigned to it, with the transaction SU01.
Ex : ESS_USER1
Go to transaction code : PA30.
Enter the pernr you want to assign to the user ESS_USER1 that you have created earlier.
Enter infotype number : 105
Now go ahead and click on the change button.
And assign the user name as ESS_USER1.
Then the pernr number will be assigned to the ESS_USER1 that you have created.
You can check the same when you go to the HRUSER transaction code.
Please let me know if you still have any issues on the same.
Cheers.
Sandeep -
How to change the default password file's name and path when the database created?
how to change the default password file's name and path when the database created?
nullUsage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character. -
How to change the sysadmin password for maintenance wizard if you have forg
How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.
Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard -
How to change the number im using on my messages?
how to change the number im using on my messages?
If you are asking about the telephone number, Messages/Preferences/Accounts/Messages account - click add e-mail and enter it.
-
I got data from OTF in SAPSCRIPT and send by email.
How to change the paper format in SOST tcode from X_65_80 to X_65_255?
I need to change it automatically from abap.
Any suggestion?Hi,
change line size and line count in report.
By default report line size and line count is taken in printer
settings
REgards
amole -
How to change the Default Password on AP1131AG
Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
LINE The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuanHi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press> -
How to change the "root" password ?
How can i change the root password on solaris 11. i tried it with "sudo passwd root ". and everthing should be ok, but i can´t login over ssh with the user "root " and the new password .
Thank ChrisUnder Solaris 11 root is a role, not an account. This means that you cannot log into the machine as root. You have to log in using a different account and then gain privileges using su, sudo or pfexec. You can convert root to a normal account using the command:
rolemod -K type=normal root
however, root was made a role for legitimate security reasons. If you can avoid changing root to a normal account you should probably do so because it provides an additional layer of security for the rather overpowered root account.
If you want ssh access to the converted root account, you also need to configure the ssh server to allow root logins by enabling the PermitRootLogins statement in the /etc/ssh/sshd_config file. Again, remember that doing this is loosening security on the root account. -
How to Remove the "Analyze..." link from Discoverer Gauge Portlets
Is there a way (a hack, even?) to remove the "Analyze..." link from the Discoverer Gauge portlets? Or, can we redirect that link to point to a different Discoverer Worksheet?
As a work-around, we're using an HTML portlet below the gauge to link where we want to go, but the "Analyze..." link is still there, so it's confusing to the end user.
Thanks!One quick statement : These customizations are not supported by Oracle. These notes are purely for informational purposes. We cannot guarantee the ability to upgrade your Discoverer environment if you make these changes. Also note that if you want to log TARs and/or bugs against the Discoverer portlets after you have made any of the changes listed in the note shown above, Oracle Support can ask you to back out any changes and reproduce the problem.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/ -
Problems using remote debugging for Web Dynpro applications
Hello All,
Have anyone ever encounter the above mentioned problem ? I am not able to step through my codes nor break @ my breakpoints using the debugging features despite many attempts following the tutorial on "Debuggng Web Dynpro applications". The problem always occur when I click on the Run -> Debug -> "Click on Debug". The debug perspective will show the threads running but my application window dows not appear. Should attempts be made to "Terminate All" threads and relaunch my apllication again, I will get an error message saying "Deployment of archive file already running : XXX.ear" Then I will need to wait some 15 mnutes or so before I can try again. Any suggestions ? Thank you.
The status of my J2EE engine is as stated in the tutorial:
1) State = "Debugging"
2) Debug Mode = "On"
3) Restricted Load Balancing = "Yes"
4) Productive Use = "No"
I have posted similar queries under "JDI" and "Web AS General" but did not receive and sugestions.
from
Kwok WeiHi
You should Create and Deploy if you want to reflect the code changes that you just did. However if you just want debug to an existing code then you need not Create and Deploy.
This can also be done as a two step process where you first deploy from NDS and launch Debug without create and deploy.
Is the issue that after you launch debug that it does not launch the application window.
Regards
Pran -
Using IGS in Abap web dynpro application
Hi ,
I would like to develop an Abap web dynpro application with complex graphs.
There is an installation of IGS services.
In the layout screen I see only graphic basic options.
In thr internet I saw much more options in the graphic label. ( WD applic-> view-> layout ).
Does anyone know how to add this options to the view layout?
Thenks,עיחיחןלכלןעל
-
How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE
Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-base_uom = lw_lips-meins.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-pick_denial = 'X'.
lw_item_data_spl-stge_loc = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_lgort TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
READ TABLE li_lips INTO lw_lips
WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
IF sy-subrc EQ 0.
Passing the delivery details into Item level table
lw_item_data-deliv_numb = lw_lips-vbeln.
lw_item_data-deliv_item = lw_lips-posnr.
lw_item_data-material = lw_lips-matnr.
lw_item_data-batch = w_lqua-charg.
lw_item_data-dlv_qty = w_lqua-verme.
lw_item_data-dlv_qty_imunit = w_lqua-verme.
lw_item_data-base_uom = w_lqua-meins.
lw_item_data-hieraritem = lw_lips-posnr.
lw_item_data-usehieritm = 1.
lw_item_data-fact_unit_nom = lw_lips-umvkz.
lw_item_data-fact_unit_denom = lw_lips-umvkn.
lw_item_data-sales_unit = lw_lips-vrkme.
lw_item_control-deliv_numb = lw_lips-vbeln.
lw_item_control-deliv_item = lw_lips-posnr.
lw_item_control-chg_delqty = 'X'.
lw_item_data_spl-deliv_numb = lw_lips-vbeln.
lw_item_data_spl-deliv_item = lw_lips-posnr.
lw_item_data_spl-stge_loc = w_lqua-lgort.
lw_item_data_spl-pick_denial = 'X'
Appending work area into internal table to pass as parameter
APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
lw_vbpok, lw_lips.
ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb = v_delivery_no.
lw_header_control-deliv_numb = v_delivery_no.
lw_header_tech_control-upd_ind = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = lw_header_data
header_control = lw_header_control
delivery = v_delivery_no
techn_control = lw_header_tech_control
TABLES
item_data = li_item_data
item_control = li_item_control
return = li_return_change
item_data_spl = li_item_data_spl.
Calling BAPI to committ the task
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you. -
How to change the portal role presentation based on users BW authorization?
Hello,
I have created 3 BW Roles, each one contains an iView with a certain report.
For simplicity let's name the Roles A,B,C and assume that in order to see the proper report the user needs to be assigned to the matching group (A,B,C) at the BW side.
I have imported these 3 roles to the portal as worksets, created new pcd role, placed these 3 worksets inside the new role and assigned this role to a certain group of users in the portal (these users are ABAP users so they are the same at the BW side as well).
What I would like to do is this: I would like that each user that I have assigned this new role to will see only the worksets that he/she allowed to see based on it's BW authorization. Meaning, if I have been assigned roles A and B at the BW I will see only worksets A and B inside the role.
The problem is this: From the portal I cannot assign the users to the BW groups and from BW I cannot control pcd roles so this kind of change requires me to make two modifications: One for authorization from the BW and one for presentation from the portal. I would like to manage it just from one place, either from the BW or from the portal, I don't care.
How can I achieve this?I think I have found a solution: Export it as a role instead of a workset and do one to one assignments with the BW groups.
-
How to change the Portal Exception from the page
Hi Experts,
I want to remove the exception symbol in Portal.If no roles were assigned to a user you will get a page displaying that " No roles are assigned to the user please contact System Admin ".I have customizied this page ,changed the string (com.sap.
portal.navigation.portallauncher.par.).But now I want to remove the exception symbol (Red) from the page.Is it possible to remove the exception symbol only for the particular page?Can any one please guide me.
Thanks&Regards
AlexiTo redirect HTTP to HTTPS
http://help.sap.com/saphelp_nw04/helpdata/en/b8/437d46d4451e4c9ab756e272a1581d/frameset.htm
Please check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/197e6aec-0701-0010-4cbe-ad5ff6703c16
http://help.sap.com/saphelp_nw04/helpdata/en/e0/48e13a1522a441e10000000a11405a/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Cheers!!
SJ
Maybe you are looking for
-
Excite Pro AT10LE-A-108: After JB 4.3 upgrade external BT keyboard does not work
Hi all! After upgrade JB 4.2 to JB 4.3 does not work my bluetooth keyboard. Pair ok, tablet keyboard sees, but not responding. Please, make toshiba repair package or fix problem. On other my android device (LG phone with 4.1.2) working this keyboard
-
Lock Entries are having the false time
Hello! I've a problem in the lock table. When I look at the status screen there is standing the right time. But the lock entries are listed with a time which is 10 minutes in the future. Can somebody tell me where this field gets his values? The lock
-
Saving photos in iPhoto from an email
How do I save a photo from an email in iPhoto? The link no longer appears in the email.
-
Firefox 4.0.1 Plug-in PDF missing
I just upgraded my Firefox to 4.0.1 on my Mac. Now when I click on a link that should open a PDF, it instead downloads it to my desktop. I looked in PREFERENCES and PLUGINS but I don't see any PDF listed. Where is it? Thanks for your help. Rick Black
-
Hibernate / Standby question
Does anyone know why my computer snaps back to life all by itself from hibernate or standby, it has to be a bios setting, but what? 1-3 min. and boom its on. Jim