How to change the portal user id 's assigned employee in ESS configuration

Hello Gurus,
    I now have a question related to ESS configuration. I want to know how to change the Portal user's pernr assignment in the ECC 6.0 system. Somebody had actually assigned my portal user ID a PERNR in the ECC 6.0 system. But now, for test purposes, I want to change the PERNR assignment to something else for my portal user id.
Could any of you please guide me in doing these steps?
Points will definitely be awarded for helpful answers.
Thanks gurus in advance for your help.
~~LB

Hi Leena,
You can create a new user name with the username and password assigned to it, with the transaction SU01.
Ex : ESS_USER1
Go to transaction code : PA30.
Enter the pernr you want to assign to the user ESS_USER1 that you have created earlier.
Enter infotype number : 105
Now go ahead and click on the change button.
And assign the user name as ESS_USER1.
Then the pernr number will be assigned to the ESS_USER1 that you have created.
You can check the same when you go to the HRUSER transaction code.
Please let me know if you still have any issues on the same.
Cheers.
Sandeep

Similar Messages

  • How to change the default date in Person assignment tab?

    Hi experts,
    Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
    Thanks and rgs,
    Michelle

    Hi Michelle,
    Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
    Hope this is useful...
    Regards
    Aatish

  • How to change the Portal Password using a link from Web dynpro application

    Hello Everybody,
    I have a requirement to change the user password from a web dynpro application which is available on a mobile device. Firstly User will log into the portal through a mobile device and after getting authenticated user will be redirected to the mobile application. Within this mobile application there will be a link to change the login password(Portal login). Can somebody tell me how can i change the portal login password from a link available within the mobile application. Looking forward for a suitable reply.
    Thanks to all,
    Regards,
    Saby.

    Hi Maksim,
    Thanks for your reply..but i would also like to know can we directly use the Change Password Iview "persoUserPassword" from the portal. Can i directly Pass the URL of this iview from the portal to a "Change Password" link in the web dynpro application, so that when the user click this link he should be able to see this Iview on his/her mobile device and should be able to change the password from there. But i dont know whether this iview will appear properly on the mobile device or we have to have a custom web dynpro application for this purpose...Please reply with a suitable answer.
    Thanks in advance.
    Regards,
    Sarabjeet Singh.

  • How to change the portal role presentation based on users BW authorization?

    Hello,
    I have created 3 BW Roles, each one contains an iView with a certain report.
    For simplicity let's name the Roles A,B,C and assume that in order to see the proper report the user needs to be assigned to the matching group (A,B,C) at the BW side.
    I have imported these 3 roles to the portal as worksets, created new pcd role, placed these 3 worksets inside the new role and assigned this role to a certain group of users in the portal (these users are ABAP users so they are the same at the BW side as well).
    What I would like to do is this: I would like that each user that I have assigned this new role to will see only the worksets that he/she allowed to see based on it's BW authorization. Meaning, if I have been assigned roles A and B at the BW I will see only worksets A and B inside the role.
    The problem is this: From the portal I cannot assign the users to the BW groups and from BW I cannot control pcd roles so this kind of change requires me to make two modifications: One for authorization from the BW and one for presentation from the portal. I would like to manage it just from one place, either from the BW or from the portal, I don't care.
    How can I achieve this?

    I think I have found a solution: Export it as a role instead of a workset and do one to one assignments with the BW groups.

  • How to change the sender user id of workflow

    Hi,
    From our system workflow three mails are sending to different recipients. Two mails are sending through WF-BATCH user and another one mail is send through ADMINU user. Now we want send other two mails also should send through ADMINU user only not by WF-BATCH.
    We know that WF-BATCH is the standard user provided by SAP will send mail through workflow. but how to change this user.
    In ECC 6.0 we could see the transaction SWNCONFIG to make changes for sender. But in 4.7 that transaction is not there.
    So could you please tell me, how to change sender of workflow mail from WF-BATCH to ADMINU.
    Thanks in Advance.
    Regards,
    Ajay

    Hello,
    What email address do these emails come from? What's different about the case where it comes from ADMINU?
    If you search this forum for WF-BATCH you'll see many similar questions.
    My response is to have a dummy foreground step beforehand assigned to the user that you want sending out the mails ; the next background task is usually run under the same username.
    regards
    Rick Bakker
    Hanabi Technology

  • How to change the root user

    hi i just bought my computer yesterday but they configure the whole computer with my husbend name so the main file the one with the house icon is with his name and wat ever i need to make a change i need to use his name and also when ever imy computer its in the sleep mode and i want to use it i have to type his name how can i change that i mean how can i change the root name it doesn not appear in the user area just on the house folder with all the main menu thanks

    Király gave you the steps to create your own admin user account, log into it, and delete the one for your husband.
    Since you appear to be new to Macs, see these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    MacFixIt Tutorials,
    MacTips, and
    Switching to the Mac: The Missing Manual, Leopard Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist.
    Welcome to the Switch To A Mac Guides, and
    A guide for switching to a Mac.

  • How to  change the Portal Exception  from the page

    Hi Experts,
        I want to remove  the exception symbol in Portal.If no roles were assigned to a user you will get a page  displaying that " No roles are assigned to the user please contact System Admin ".I have customizied this page ,changed the string (com.sap.
    portal.navigation.portallauncher.par.).But now I want to remove the exception symbol (Red) from the page.Is it possible to remove  the exception symbol  only for the particular page?Can  any one please guide me.
    Thanks&Regards
    Alexi

    To redirect HTTP to HTTPS
    http://help.sap.com/saphelp_nw04/helpdata/en/b8/437d46d4451e4c9ab756e272a1581d/frameset.htm
    Please check this link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/197e6aec-0701-0010-4cbe-ad5ff6703c16
    http://help.sap.com/saphelp_nw04/helpdata/en/e0/48e13a1522a441e10000000a11405a/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
    Cheers!!
    SJ

  • How to get the portal user id into the web dynpro iview at runtime?

    Hi,
    Can any one let me know, How to display portal id and as well as backend SAP user id into Web Dynpro iview at runtime. I am using Adaptive RFC model in my web dynpro application.
    Raj.

    Raj:  check this thread. I think that will help you.
    Can i get Portal User's details in webdynpro??
    I had the same requirement and its works whit this solution.
    regards.

  • How to change the   Success Message  for Personal Data Screen in ESS

    Hi,
           While saving the Personal Data in the ESS  I want to chage the Success message.When I check the DC , Message Class  i am not able to find the  the particular string.Can any  one please  guide how to find the Success Message String   for this Personal Data Screen or Which BAPI  I  have to check .
    Regards
    Alexi

    Hi  iidhya ,
      Please find the code below
        public boolean onEvent( )
        //@@begin onEvent()
        String event = fpm.getEventData().getEventName();
              if (event.equals(IFPM.EVENT_ADD)){
                   wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
              }else if(event.equals(IFPM.EVENT_EDIT)){
                   wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));                              
              }else if(event.equals(IFPM.EVENT_REMOVE)){
                   wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));                              
              return true;
        //@@end
    Regards
    Alexi

  • How to change the UWL refresh rate for all portal users.

    Hi Portal Experts,
    How to change the UWL refresh rate for all portal users?
    Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
    It was defaultically set to 5 mins for all users.How to change this to 20 mins.
    Thanks
    Sony.

    1.      Launch the UWL iView configuration page.
    You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
          From the Universal Worklist Systems, choose the system for which you want to edit the properties.
        Choose Edit.
    may be you can get clear help from below help file
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    regards
    nagaraju

  • How to change the Default login script and the USER login script in Netware3.12

    I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
    please tell me
    how to change the Default login script and the USER login script in
    Netware3.12 ?
    Or is there any other ways to do this thing?
    Thanks a lot!

    On 4/6/2006 [email protected] wrote:
    > how to change the Default login script and the USER login script in
    > Netware3.12 ?
    Please repost in the discontinued.forums.
    Edison Ortiz
    Novell Product Support Forum SysOp
    (No Email Support, Thanks !)

  • How do I change the itunes user name on my iphone?

    How do I change the itunes user name on my iphone? When I attempt to purchase an app or update the existing ones, the previous owner of this iphone has their information displayed and asks for the password as their user name is automatically prompted?

    The apps are tied to the account from which they were purchased.  If the apps were purchased from the previous owners account, then they would have to be updated from that account.  you should not have these apps anyway.  You need to buy your own.
    Read the manual.  it will tell you how to sign into your account to buy apps.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    I would suggest restoring as new.

  • How to Change the Alias name for Internet user in SU01 tr code through cod?

    Hi Guys,
                 My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
                Is there any FM for tha changing Alias Name?
    Thanks,
    Gopi.

    Hello Gopi Anne ,
                                 You can use the following FM / BAPI :
    BAPI_USER_CHANGE
    MY_BAPI_USER_CHANGE
    For BAPI_USER_CHANGE :
    You need to make use of the IMPORT parameter :
    ALIAS     TYPE     BAPIALIAS                               User Name Alias
    ALIASX     LIKE     BAPIALIASX                               User alias change flag
    Thanks,
    Greetson

  • I have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?

    Greetings Lex,
    Kind of you to comment ... but you are also adding years to my signature!   I know I'm 76 but I don't want to think about it. 
    Regards  71.

  • How to change the text of a user defined field in dynamic selections?

    Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
    Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
    Found an OSS note - 86980 - that tells that this is not possible.
    But when we read the documentation on the user field (CJI3 - dynamic selections  - double click on user field - F1), it shows the following text:
    User-defined field in which you can enter general information with a length of up to 20 characters.
    Dependencies
    The names (key words) for  user-defined fields depend on the field key.
    Now the question is where to change the field key..
    Thanks,
    Ven

    Madhu - you did not get the question I think.
    Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
    Thanks,

Maybe you are looking for

  • Automatic version update - some problems

    Hi, on SQLD startup (1184) info about new updates has appeared. After dowloading and installing (check for updates dialog) I was prompted to restart SQLD. After restart I looked in About/extensions (see below), all components seem to be 1.3 and up. T

  • !csComponentDataNotFound, when enabling a custom compoent in UCM 11g.

    Hi, I am seeing following exception when enabling custom component in UCM 11g (through component manager). Any pointers on what could be the issue. intradoc.common.ServiceException: !csComponentDataNotFound, DV_Eloqua After enabling when i restart th

  • IPhoto file sizes and a Trash mystery

    I hope someone who knows more than I do about iPhoto file sizes can help solve a mystery for me. I'm not a Mac novice; I have been using them exclusively for more than 20 years, but I haven't come across this phenomenon before. For a few months now,

  • The most annoying "Ad" ever

    OK, I get it. You want me to pay. But I am not going to pay.  And I am not going to listen to a 3 minute, 30 second long ad disguised as music, from a genre I consider junk, in the middle of a classical music playlist. The Mates of State are not Bach

  • Cannot scan after 1/16/2008 OS updates

    Installed the four(?) Apple OS updates that appeared after Steve Job's keynote at Macworld 2008. Now, I cannot scan from Photoshop with my Epson Perfection 4870 flatbed scanner. Worked fine last week. Now, Photoshop says it cannot find the scanner on