How to change the posting date in UD stock posting for a HU managed item?

Hi,
We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
Thanks & Regards,
Madhavan Krishnamoorthy.

I don't think you can.
Craig

Similar Messages

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the capitalization date

Hi ,
I carried out WBS to AUC settlement on 31.12.2009, due to which AUC cap. date becomes 31.12.2009. Now i want to change the cap date to 01.12.2009. How do i do it? Reversing the settlement using CJ88 can only change the first Acq date but not the cap date. Also cap date is not an editable option in AS02.
Reason for all this is that i want the cap date of fixed asset to be 01.12.2009.
Regards,
DP

Hi Srinu,
Thanks for your reply. Are there any implications of changing the cap date manually? Is it an advisable option or is it better to keep asset value date as 31.12.2009 and then post an unplanned dep for the asset.
Regards,
DP

How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to change the standard data type in xi

Hi,
presently we have SCM.i want to change the standard data type i.e" Replinishment order notification ".i want to change the length of the field .
but there is no edit option for that data type.
i even modified Software component version( http//sap.com/xi/scmbasis/global)with objects are original objects and objects are modifible(tick the check box)
thanks in advance.
atmakur

Hi Atmakur,
i even modified Software component version( http//sap.com/xi/scmbasis/global)with objects are original objects and objects are modifible(tick the check box)
After doing this have you activated the change list? If not please do it and refresh it..and try to open..it will work..
Regards,
Prasanthi.

How to change the Discussion board view to facebook posting type view

hi friends..
i want to change the discussion board view to facebook posting type.Where multiple discussions and comments on single page as well as all the comments should be in a threaded view and also i want to find a new discussion
link in same page.
can any one help me...

Hi,
As I understand, you would like to improve discussion board to display all posts on a single page with comments.
There is no OOB option to customize discussion board. However, there are workarounds:
You could create a site with Blog site template, and it could meet your requirement. More information about Blog site:
http://office.microsoft.com/en-in/sharepoint-foundation-help/create-a-blog-HA010378201.aspx
You could use Note Board web part instead, and customize it to allow reply:
http://social.technet.microsoft.com/Forums/en-US/f7e466ee-ab53-47c5-9dd9-232e295bca6f/sharepoint-2010-note-board-web-part?forum=sharepointgeneralprevious
You could customize Discussion Board directly using Content Query Web Part and XSL:
http://sharepointsolutions.com/sharepoint-help/blog/2013/04/custom-discussion-board-rollup-using-content-query-web-part-and-xsl/
Regards,
Rebecca Tu
TechNet Community Support

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

How to Change the XML data that got stuck up in XI

Hi,
I am executing a scenario which sends the data from HTTP client>Xi->SAP(R/3 4.6).We are queuing the messages in XI, through QoS EOIO.Sender side we have configured the HTTP adapter and on receiver side we have configured RFC adapter.RFC at receiver side throws an exception, if I try to call rfc from XI by sending wrong data to it from HTTP client.The message which is failed gets stuck up in the queue , whose status will be shown as System Error.So, No messages will be further processed from that queue.
Our Requirement is, We need to manually change the xml file which is failed while trying to post data in to SAP.Could any one help me to find where the Failed xml file gets stored in XI and how can we change the file .
Regards,
Kiran kumar.

Mario,
This is possible from SP 19 onwards...
Have a look @
/people/gourav.khare2/blog/2007/02/28/sapxi--message-editing-150-responsibility-and-liability-150-sp19
Also, the comments in the blog. Really good
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
Regards,
Jai Shankar

How can change the created date on a photo?

Hi
I have imported photos that were originally taken in summer 2002 (and where dated as such), now they have been imported to iPhoto, the created and modified dated have changed to the date I imported them (14th Sept 06), therefore they are now sitting in the wrong years folders.
How can I move this pictures back to the correct folder i.e 2002/ I have tried amended the date in 'get info' however the date can't be changed.
thanks
mini mac Mac OS X (10.4.7)

I haven't tried moving photos among the 'years' folders, but you can alter a photo's date in the 'info' box that pops up at the lower left when you click on the "i" button down there. You can also change the date of an existing folder by the same means -- that will change the sort-order of the library.

How to change the calyearmonth data format in psa

Hi all,
my requirement is to load data to dso from csv file it contains 0calmonth characteristic and carparc keyfigure
and i have created a transactional datasource
and when i am loading the data in csv file my data format is 201101 but in psa it is taking 110120
can u tell me how to correct this one.
when i activate the request to active data table it is showing transfered records are 12 and added records are 1 can u tell me how to correct this.
Thanks & Regards,
Naveen

Hi Naveen,
You don't need to change the original infoobject but you can do this changes in DataSource. In your datasource goto field mapping tab and first of all you can map the date field to 0calmonth and on the same line you will have the option to choose the format.
There you can go for internal format or External format as per requirement at the same time you have the option to provide conversion EXIT name.
Regards,
Durgesh.

HOW TO CHANGE THE FINANCIAL TRANSACTION IN FM AFTER POSTING HAS BEEN MADE.

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
HI
IN FM I HAS BEEN POSTED ONE TRANSACTION FOR A PARTICULAR G/L ACCOUNT.
AFTER THAT I WANT TO CHANGE THE FINANCIAL TRANSACTION FROM 30 TO 50.
SUGGEST ME IF ANY ALTERNATIVE WAY.
HOW IT POSSIBLE ?
THANKS & REGARDS
MALA

It's not possible with standard functionality. Create a new CI and use it instead of the one defined incorrectly.

How to change the exchange rate filled in a posted Invoice?

Hi All,
an user has posted an invoice in foreign currency. He has forgotten filling in a particular exchange rate.
I wonder if is possible to change the document filling, in the exchange rate required, so to have the right amount in local currency.
Thanks
G.Rossi

Hi,
You can not change exchang rate in the already posted document.
You need to reverse that document and have to create a new one using correct exchange rate.
Regards,
Gaurav

How to change the created date for a file?

I searched and found someone had asked this question last month, and an answer given was to try the site:
http://danilo.ariadoss.com/howto-change-date-modified-date-created-mac/
which I had previously found. However, when I follow the instructions I get a message stating "-bash: -t: command not found"
I have gone through this numerous times, always with the same result. Is it possible that the direction given are not valid for Snow Leopard?
Thanks for any help.

First, thanks to both of you for helping - I hadn't realized that the 'touch' was part of the command itself. However, when I type in:
touch -t 0904131115/Users/RobertFately/Desktop/suttonallen/suttonallen.jpg
to test the procedure (there is a jpeg file I made today named suttonallen inside a directory of the same name) I get this error message:
touch: out of range or illegal time specification: [[CC]YY]MMDDhhmm[.SS]
This happens if I use the full year (2009) or just the last two digits (09) as seen above. My thinking is that I am attempting to redate the "create date" to April 13th of this year with an arbitrary time of 11:15AM.

How to change the jta-data-source for projects in EJB 3

Hi all,
Sorry my english! :)
I'm learning the EJB 3.0 and I'd like to change jta-data-source for projects in JDeveloper 10.1.3.1.
I explain:
In the same Application, I have a project with all Entitys and Session Beans. At the moment, the persistence.xml file is there with the jta-data-source tag.
I make a new project with JUnit (Cactus) for test the EJB's that I'd like jta-data-source reference the test database.
I make another project, with Servlet/JSP/JSF that use EJB's with interface and I'd like jta-data-source reference another database.
What kind of changes (workaround) I could make to solve this problem?
Thanks a lot!
Luciano

Hi,
There are COOM data source which may suits your needs.
please check data source
0CO_OM_WBS_6
0CO_OM_WBS_3
Base tables are COSP and COSS.
Check about coom data source, if not suitable then go for custom data source.
About table cross verify with your source team.
Thanks

How to change the pricing date inthe conditon record access details

Hi Team,
Please help to solve this issue.
When we create a sales order, pricing date will update as creation date and the same date will appear in the condition records access details for all the respective condition type.
In case of sales order is created with reference to Contract then pricing date will update same as from the contract pricing date.
for examaple contract created on 01.01.2014 for the same day if we create the sales order with reference contract then pricng date will update as 01.01.2014 in the sales order.
If we create the sales order example today 19.05.2015 but stil pricing date will update as 01.01.2014 (due to same date available in the contract)
Now my requirment is for one of the condition type ex ZXXX this pricing date should update as sales order creation date (Not all the condition types) in the condition record access.
Please check and let me know ho to solve this issue.
Thanks in Advance.
MK.

Hi MK,
When we define a price condition in customizing, we have field Pricing date, with the following entries available:
‘ ‘   Standard (KOMK-PRSDT; tax and rebate KOMK-FBUDA)
A    Date of services rendered (KOMK-FBUDA)
B    Price date (KOMK-PRSDT)
C    Billing date (KOMK-FKDAT)
D    Creation date (KOMK-ERDAT)
E    Order date (KOMK-AUDAT)
Use E.
Regards,
JM

How to change the posting date in UD stock posting for a HU managed item?

Similar Messages

Maybe you are looking for