How to change the print margins in Acrobat XI

I am trying to print two pages per sheet on an 8 1/2 X 11 cardstock in landscape mode. The problem I am having is that adobe's default margins are 1" and this leaves a lot of room around the edges and leaves the pages difficult to read. How do I change these default settings? I don't believe scaling will work because that doesn't change the margins. Please let me know something. Thank you ahead of time.
Bruce

Hi All,
Have you checked for "Product Updates" from the printer menu. In the ePrint website find out whether you can remove the app and add it again.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • How do I change the print margins in firefox 4.0 in ubuntu?

    When I upgraded to Natty (Ubuntu 11.4), I was automatically upgraded from firefox 3.6.x to 4.0.x
    I want to change the print margins, however when I go to File > Page Setup, it only gives me options for changing the paper size and orientation. There is no longer any sort of tab or option for margins, header & footer, etc.
    Am I missing something or is firefox?

    Try this:
    EDIT:
    * Goto about:config
    * Look for print.printer_<PRINTERNAME>.print_margin
    * change those to what you want :D
    * Restart the browser.
    ENDEDIT:
    Should help you out.
    Thanks to the-edmeister from this post: http://support.mozilla.com/en-US/questions/810599

  • HT4356 I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office?

    I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

    You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

  • Can't figure out how to change the bottom margins

    This is my 3rd day with a mac and I can't figure out how to change the margins in Pages '09 so that it doesn't include a .5 margin on the bottom.
    I'm using a HP OfficeJet J6450. In the page setup, I changed the "untitled" user defined margins to .1 for top and sides and 0 for the bottom and it still includes a .5 margin on the bottom. Changing the untitled seems to help side margins.
    I've used the inspector to see if there is a setting there that defines the bottom margin as .5 and that doesn't seem to do it.
    If I print borderless, the text boxes that I have a .3 border around don't print on the edges even though they show up on my workspace. It also throws off the top and bottom.
    This is a big assumption, but I assumed that if the workspace and rules show white space and now grayed out, it would print that way. It's not.
    Any ideas? Thanks! Ana
    P.S. I've downloaded & installed updates for everything - OS, iWorks, Printer

    Peggy,
    Maybe this is true of Macs? On my windows systems - I can specify more options on both my printers and can print beyond .5 inches at the bottom. One specific option on my J6450 that I can select is "minimize borders" and it will print about .1 or .2 from the edge. On my mac, I do not have that feature to select. If I print borderless, even though my layout shows it should not go off the paper, once printed it does.
    Thanks.

  • Cannot change the print margins when printing out my spreadsheet.  Tried clicking on format and then Document but when I enter a number I always get " invalid number".

         I cannot change the margins when printing out my spreadsheet.  I clicked on the format then on document and got a entry box.  But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response.  I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped.  Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper.  Want to change the margin so I don't get that message.

    Naming the spreadsheet app would do wonders for getting an answer.

  • How to change the print page setup in IE using javascript

    dear all,
    I want to take print out envelope paper size, so i want to chnage the page setup in IE
    i want to change the print page setup in IE using javascript

    I think, you can do this using CSS.
    http://support.sas.com/rnd/base/ods/templateFAQ/Template_csstyle.html

  • How to change the printer name in the User profile in the run time.

    Hi
    I am in need to change the printer name in the run time.
    Do any one hav idea about this?
    Thanks
    Karthik

    The user default settings can be changed using funtion module SUSR_USER_DEFAULTS_PUT.
    Import parameter USER_DEFAULTS-SPLD will hold the default printer name.

  • How to change the print queue name with Lexmark printer?

    Is it at all possible to change the print queue name from Lexmark_3500_4500_Series, to something shorter? I try to link printouts from an old Sun Unix system, thru my iMac to the Lexmark X4580 multifunction printer. However, the Sun/Unix will not accept this long print queue name...

    Apologies, I misread. The only way I know of changing the Print Queue Name is by readding the printer.
     > System Preferences > Print & Scan > Add
    Choose your printer, make sure you change the print queue name to something different (equates to the Printer Name).
    When you need to print, simply select the printer you just added.
    Once your happy it works, delete the old printer from the list in Print & Scan.
    Morgan

  • Report 3.0 : How to set the printer margin??

    Hi all,
    In report previewer, I am able to set the printer page margin
    mannally.
    Then, If, I've get some reports by RUN_PRODUCT in batch mode,
    how can I set the page margin??
    Regards,
    Andrew
    null

    Hi amole,
    one more doubt,
    Iam new to use BAPI_ENTRYSHEET_CREATE.
    What are the mandatory fields that should be passed to it to create SES ( Service Entry Sheet ).
    The data given to me is:
      Purchase Ord number,
      Activity Number,
      Rate,
      Quantity,
      External Number.
      Is the above data is enough to create SES.
      please clarify.

  • How to change the mailto address in Acrobat X Pro

    Have a pdf form that I need to put on a website so people can fill it out and submit it.
    Need to change the email address where it is to be sent to when they click on the Submit button.
    I have looked and looked, and can't figure out where to change this.
    Any and all help would be greatly appreciated.

    Once I have the pdf done, and then "distribute" it.....
    When I complete the pdf form, and click on submit, it is trying to send it to the wrong address.
    Need to change that address.
    Suggestions?
    Thanks,

  • How do you change the page margins?

    Hi There,
    Since upgrading to Yosemite, I can't figure out how to change the page margins. If you look at the image below, I am trying to extend all of the margins so I can fit more text in. Thank you so much for your help!

    Hi,
    Thank you for your reply.
    I do not see where I click "toolbar" or "Document", etc. I even typed "adjust document" and "header/Footer margins" into the help box and I couldn't find it. Are you able to tell me how to do it starting from "File", "Edit", "Insert", "Format", etc? Or do I need to click on something with the new inspector. The option are "Style", "Layout" and "More". Thank you so much!

  • How do you change the print zoom of a webpage for printing?

    I would like to know how to change the print zoom (the zoom of a page on the paper when it is printed) of a webpage for printing. I used to always do this when I had Mozilla Firefox on a Windows XP computer but ever since I got Mozilla Firefox on a Windows 7 computer, I could not do it. When I go to "File", there is no "Page setup" or "Print preview"; it just shows you the print preview and only allows you to alter the print, number of pages and copies, the layout, the colour and the zoom of the page (physical size of the whole page on the screen). I would be very grateful if anyone could solve this problem. Many thanks.

    orange Firefox button ''(or File, by hitting the Alt key to reveal the Menu Bar)'' > Print -> Print Preview ''(or Page Setup)''
    Adjust the '''Scale''' in the Print Preview window.

  • How can I set printing margins of report?

    Hello,
    I am trying to print programmatically a portrait of a JPEG image that has been created by a Front Panel.
    I print it by creating a Standard Report.
    While the JPEG image is fine, the printed image is compressed at the long edges. So, the printed image is a little bit distorted.
    I change the Printing:Margins Property of the vi at the First Call of the vi, but the result is the same.
    On the other hand, if I open the JPEG image with a program like Picasa and print it, the printing image is not compressed/distorted.
    I attach an image of the code that is used to print the JPEG and an image that shows the Printing:Margins Property.
    How can I print it correctly via LabVIEW?
    Solved!
    Go to Solution.
    Attachments:
    Print_code.JPG ‏31 KB
    PrintingMargins_code.JPG ‏22 KB

    Hello,
    I tried the solutions that you proposed and I have the following results:
    1. The solution to print the Front Panel through the invoke node of the vi's reference is not ideal, because the desirable printer cannot be chosen.
    2. I cannot use the Word Report because I have not the Report Generation Toolkit for Microsoft Office.
    3. I used the HTML Report and I change the print settigns by modifying the registry keys in the following folder:
    "HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup"
    I can change the margin_bottom, margin_left, margin_right, margin_top, Shrink_To_Fit and assign the values 0,0,0,0,no to them.
    The result in the printing image is obvious. It is no longer compressed and it is positioned almost according to the margins. Although all margins are set to 0, it has to be positioned 2cm more at left and about 2cm higher to be proper.
    But the footer and header registry keys even if they are deleted (I cannot assign empty string from command line), they are appeared in the printed page.
    I attach the new vi files that modify the registry keys of the above folder before printing and restore them after printing.
    Also, the Front Panel size of the Report.vi has been changed and set equal to the A4 paper size 21x29cm and a little bit bigger in order not to print the decoration border.
    So, the problem of proper printing of HTML report remains having only to remove the footer & header and understand why the printing image is not positioned at full left and full top even if the registry keys margin_left and margin_top are 0 and 0.
    On the other hand, if the vi's Front Panel JPEG image is printed from a Photo-program, it is printed correctly given that the margins are set to 0 and the "Scale" option has been disabled.
    Thank you very much for your help.
    I am looking forward to hearing from you if it is possible.
    Attachments:
    PrintReport.vi ‏336 KB
    Report.vi ‏6 KB

  • Change the print program from the Transaction F150

    Hi all.
    Does somebody can help how to change the print program in the transaction F150?.
    I have copied the F150_dunn_01 (form) and the SAPLF150 (printprogram)
    This transaction calls the form F150_dunn_01 I want to know how to assign to this transaction my print program ZSAPLF150
    Thanks and regards.

    Hi Srinivas Adavi.
    Ok, I have taken this path...
    IMG-->Financial Accounting
         -->Accounts Receivable and Accounts Payable
           -->Business Transactions
             -->Dunning
               -->Printout
    In this, appears:
    Define Dunning Forms (with SAPScript)
    Define Dunning Forms (with SAP Smart Forms)
    Assign Dunning Forms
    Define Sender Details for Dunning Forms
    Develop Enhancements for the Dunning Print Program
    Attached Payment Media
       -->And So On.
    What are then next steps to make the configutation; sorry I'm newbe jeje

  • To change the printer name

    Hi,
    I have a requirement to change the printer name when the user tries to send the invoice with the same o/p type second time also.How to change the printer name?

    We have a field in NAST table which tells us whether the copy is printed for the first time or more then once. Read the value basing on the output type (i.e., Message type in nast table)
    Now in your driver program & modify the parameter OPTIONS that are passed to function module OPEN_FORM, goto Option and pass your printer name according to your requirement.
    Ex: if <print> = 1.
      <printer name> = 'XXX'.
        if <print> GT 1.
      <printer name> = 'YYY'
    Close the thread once your question is answered.
    Rgds,
    SaiRam

Maybe you are looking for