How to change the range in numbers?

how to change the range on graph from .0000 to .0 or .00 and ther range on thr graph from 2's to .5

Hi,
Click on Graph Properties icon->Scale Tab -> Click on Vertical axis and specify your range.
Regards,
Dpka

Similar Messages

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
Respectfully,
Jon

My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
Select C2 and D2 and Command-C to copy them to the Clipboard.
Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
Jerry

How can I rearrange the pages in a PDF without changing the assigned paged numbers.

How can I rearrange the pages in a PDF without changing the assigned paged numbers? These correspond to the original document folio numbers.

In theory it would be possible to 'record and play back' the page numbers using a folder-level script, but it's far from trivial. You would have to use the doc.movePage() function - presumably driven by a dialog box - to do the page shuffling so there was a way to track what was being done, then swap the page 'labels' of the two affected pages. That's where it gets messy.
We have functions in the JSAPI which can read and write the page label, but they don't do things in a logical way. The 'getPageLabel()' function simply returns a string, but the 'setPageLabel()' method expects to be told the numbering scheme, prefix, etc. You'd have to parse the string and work out what scheme it was implementing.

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

How to change the default view of published iCal's URL

I am publishing an iCal for a nonprofit group and link to the calendar from the group's website. The default URL given (in the send publish email option) leads to the week view of the current week. I would prefer the link to take site visitors to the month view of the calendar. If I go to the month view and copy the URL for it, and use that for the link, I have to change the URL each month, because the URL that comes from the month view will only show the month it was at the time I copied the URL -- it will not change with the new month. Does anyone have any idea of how I can change the URL so that it leads to the month view of whatever the current month is?
I should note that I know how to change the default view in the my browser, but I would rather not have to explain how to do this to all the people viewing the calendar -- just wanting the correct month view to show up when they click the link, without having to change it each month.
I would be so grateful if anyone has some insight on this!
Thanks.

Carlo,
The fact that this question has been left unanswered for over 2 months seems a little negligent on the part of Apple Support.
This Forum is unfortunately not Apple Support. According to Apple:
What is Apple Discussions and how can it help me?  "Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. You'll find a wealth of information about your favorite Apple hardware and software products that will help you get the most out of your purchase. You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages."
In direct response to your questions, I would say that (as observed by the OP) anyone who subscribes to a published calendar can make a change to their desired view using the "Preferences" icon which is displayed underneath the mini-month calendars.
There is no way that I know of to directly or conveniently change the time-range. There may be workarounds, but I could not find a suitable solution for you.
I would recommend that you provide iCal Feedback, if you are interested in informing Apple of your desires.
;~)

How to change the default servcie port number to be checked for the IPS sig

Dear
i have an AIP-SSM (IPS) installed in a an ASA firewall.
i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
but the case is that the services have to be checked is not the default services port numbers.
http port is 8081
oracle port is 2006
and many other services.
the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
Thanks

You would set those as part of the signature variables.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to change the Timestamp In a program

Hi,
We faced a problem today, Some of the critical jobs from a source system are going to short Dump. Unfortunately we couldn't find any lockwaits, deadlocks and any delay in SM37. After analyzing, we came to know that, SAP trace indicates failure occured during program /GLB/RGTCSR_RC_INV execution :
B *** ERROR => DISTRIBUTED_TA_FAILED:
The timestamp for the execution of the program has been set as "20.070.801.000.000", that does mean it will try to retrieve all values after the date 01.08.2007 and the time 00:00:00. Now checking on the code we can see there is a logic written which retrieves the values from the table /GLB/RGTT_CS_RC, checking on the Goods Movement status (wbsta) , timestamp and document number (VBELN_SO) if any. For this case VBELN_SO is blank and vbsta is equal to space (Not Relevant). This retrieval helped to logic to retrieve 706706 document and items from the table. This amount of data is huge and we would like to request BW team to run the program with a smaller timestamp to avoid any inconsistencies and also to avoid the dumps which can occur when we try to play with this huge entries.
Checking on the code, two similar selects have been written on the same table /GLB/RGTT_CS_RC, firstly to select all the document numbers relevant to the timestamp and wbsta value and secondly to check "Get records that may have already been used", depending on the document number and item numbers. But as we are doing a select * it will automatically select VBELN_SO as well as POSNR_SO. Hence, the second select from the same table is irrelevant and it will only effect the performance of the system, in the worst case it will terminate the program with this huge amount of entries. Hence, this logic has to be combined to one single select for which the first select statement is enough. Playing with a huge amount of data 706706, and retrieving from the same table twice can surely result in a short dump. Also there are couple of loops has been done on the same table which reduces the performance too.
Possible solution looks like we need to reduce the time stamp and run it,
can some one tell me how to change the time stamp in a program???

First check the connection with the source system. If its ok then replicate the datasource and activate. Then try with running job.
Time stamp error usually happens when source system in BI and r/3 side differs.

How to change the order of albums iOS 8?

I recently upgraded from an iPhone 5 to a 6 Plus. Everything is fine except for the fact that some of my music is in the wrong order. There are some groups that released multiple albums in the same year, and I would like them to be in the order of when they were released. On my 5 I was able to put them in the right order by going on a computer, changing the sorting, then update iTunes Match to have it change on my phone as well. (example; group came out with album "1" and "2" same year and it defaults to "2" first, then "1." I was able to change it on the iPhone 5 to be in the right order by changing how they are sorted from my computer but that doesn't work on the 6 Plus.) I would like to order it where it goes top to bottom, with the newest on top going down. How would I do this?
Thanks

Hi Jason,
How to change the order of tables within sheets
Make a table active by clicking in it once to select that table, then drag it by the 'bullseye' (top left, I have placed a red circle to show the bullseye):
After dragging the table down:
Table 1 is now below Table 2.
The blue line is an Alignment Guide
Two types of Guide:
1. Menu > View >Show Rulers. Drag Alignment Guides from a ruler to where you want them.
2. Menu > Numbers > Preferences > Rulers > Alignment Guides. Turn on (tick) both guides. That allows you to align objects with *each other* (as well as with the ruler guides). These guides help to align objects left, middle, right, top, bottom.
Alignment Guides do not show unless you are moving an object.
to drag/move table to another sheet in the one file
Not possible in Numbers 3. The Sheets Pane has gone. Instead, select the entire table (click once in the table to make it active, then click on the bullseye). Copy (or Cut if you are brave). Go to another Sheet and Paste.
Also can you change the size of sheet tab width on tab toolbar, so I can see more sheets at once??
No. Let's hope this will be added in future updates. However, you can drag a Sheet tab left or right to reorder them.
Another tip: each Sheet tab shows the contents of that Sheet, with some options such as Duplicate and Delete:
Regards,
Ian.

How to change the status of Serial number

Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
Sri

Hi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

How to change the paragraph style of every paragraph that only contains an anchored object?

Hi,
I have a document in word that needs to be converted into indesign. The document containts instructions, each step followed by an image.
I've managed to import the document into Indesign, and applied a paragraph style with numbering to everything (text an image).
Now, how to change the the paragraph style of every paragraph that only contains a image? I need to get rid of the numbering.
Thanks in advance.

Create two Paragraph Styles and name them Image and Non-Image. Apply the paragraph styles manually to the text containing image and not containing images.

How to change the "content created" date/time in FCPX?

Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

I had a bunch of DV files that imported stamped with the file modification date and time. I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

How to change the range in numbers?

Similar Messages

Maybe you are looking for