How to change the requested delivery date when approval has been done

Hi
We use SRM5.0 and we want to implement SC, now we want to make it possible to change the delivery date in the shopping cart when we approve.
This is needed if we request today but the approver didn't approve same day, therefore the requested day has to move the same number of days, that the approver has spend. Or else the deliver date will not be correct.
Do any of you know how to do this??
Best regards
Jakob

Hi Jakob,
What scenario do you use? Classic, Extended Classic, Standalone?
So depending on your scenario you can have differente types of follow-on documents (PR/PO only in ERP in case of Classic, or PO in SRMand ERP in case of Extended Classic).
Do you use Sourcing Cockpit?
I've tested this scenario in SRM 7.0 Standalone and if the follow-on document (in my case, a PO) is not "Ordered" yet then I can change the SC. But if it is already "Ordered", I can't change the SC. This is standard behavior.
You could use Sourcing Cocking to solve this issue, in this you don't use it yet.
Best regards,
Christian Zeuch

Similar Messages

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Schedule lines are not modified when i change the requested delivery date

Hi
i have a issue when i am created sales order with requested delivery date 10.11.2011
and the same is copied in to item schedule lines as a 10.11.2011
before saving the order i change the requested derlivery date to 11.11.2011
this new requested delivery date is not dopied to schedule lines at item level (still is having 10.11.2011)
can any one tell me this is system standard behaviour or can we correct this
Thanks and Regards
Kishore

Hi DevarapalliKK,
I tried this solution & problem is solved.
--Go to VA01 & enter the material & qty
--Select the line item in VA01 & click on Edit
--Select Fast Change of & click on Delivery date & mention the Delivery date as 11.11.2011. & click on copy.
--Check the request delivery date in header level in sales tab it will change to 11.11.2011 & also check the Schedule lines in Item level the date will be 11.11.2011 & Save it.
Please let me know if your problem is solved
Regards
Pradeep

How to change the default delivery day when i create a shopping cart?

hi,dear
i got some trouble when i was creating a shopping cart.
i want to change the default delivery day when i reference an old template.
pls see the pictures and take the details.
it seems that this forum dont support the [img][/img],so pls clike the link to open the picture.
if you cant see the picture ,pls tell me,thank you
step1:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119338649_0.jpg
step2:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119432170_0.jpg
step3:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119557507_0.jpg
step4:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111120079773_0.jpg
Edited by: ming yu on Sep 11, 2009 5:22 AM

Hello Ming,
Have a look at following thread concerning BAdI BBP_CHANGE_DEFAULT:
[Change the delivery date (Required on) of SC|Change the delivery date (Required on) of SC;
You will have to check in which SC transaction you are in order to distinguish creation from reference to old template.
Regards.
Laurent.

IDOCS - Finding the first error message when reprocess has been done 17000 times

I was hoping for some assistance. We have an automated reprocessing of our iDocs in one interface. I would like to find the first error message at status 51 in order to see the failure messge. Since the idocs have been reprocessed so many times, it cannot be found in the iDoc handler. Please advise if you have tips.

This message looks like homemade. And the message will not change, no matter how often you repost the same IDOC without having changed anything.
So you should at least see the message number to this message in the EDIDS table
You can search SCN using this number, you can search for OSS notes with this number, or you get active yourself in SAP and check the where used list from SE91 transaction to know in which program this error is triggered and under what circumstances

Mass Change to Requested Delivery Date

Hallo Everyone,
We have a scenario where we want to change the Requested Delivery Date to all Line Items when it is changed in Header Level.The reason is we might have 80-120 Line items in a Order.It is difficult for a person to change the req. delivery date for each line item.
Can any one tell me is there any standard way or FM to do ?
Thank You in advance.
Regards
RR

Hi Stephen ,
Thank You for your quick response , i did exactly as you have guided .I havnt see anything that does match .
And forgot to mention in my first message ,but some times i need to able to change one or two items manually . If i use BADI is it possible ? to change a one or two line items manually ?? as i am concerned when i save it again the BADI will trigger back line item requested delivery date to header level ?? Please guide me .
Thanks
RR

Output the requested delivery date for each different line item

Hello Experts
I have program called ZFSFSF(following), in the output Its showing multiple requested delvery dates per line item.
But We need to show the requested delivery date for each different line item.
Any code is highly appreciated. I wud appreacite if you cud bold the added code.
Thanks
SP
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
vbeln LIKE vbak-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
erdat LIKE vbap-erdat,
mvgr1 LIKE mvke-mvgr1,
wadat_ist LIKE likp-wadat_ist,
days TYPE i,
werks LIKE vbap-werks,
lgort LIKE vbap-lgort,
kwmeng LIKE vbap-kwmeng," CH01+
lfimg LIKE lips-lfimg," CH01+
pstyv LIKE vbap-pstyv," CH01+
obd LIKE lips-vbeln," CH01+
obd_pos LIKE lips-posnr," CH01+
soldto LIKE vbaK-kunnr," JR+
shipto LIKE vbpa-kunnr," JR+
edatu like vbep-edatu," PR+
END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
prognm LIKE sy-repid,
gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
gt_events TYPE slis_t_event,
is_layout TYPE slis_layout_alv,
is_variant LIKE disvariant,
it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
s_matnr FOR vbap-matnr," obligatory,
s_mvgr1 FOR mvke-mvgr1,
s_erdat FOR vbap-erdat OBLIGATORY,
s_werks FOR vbap-werks,
s_lgort FOR vbap-lgort,
s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
g_default(1) TYPE c,
g_exit(1) TYPE c,
gx_variant LIKE disvariant,
g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
LOOP AT i_list.
SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
WHERE matnr = i_list-matnr.
MODIFY i_list.
CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-mvgr1 IN s_mvgr1.
CONTINUE.
ELSE.
DELETE i_list.
COMMIT WORK AND WAIT.
ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
select single vbeln into lips-vbeln from lips
where vgbel = i_list-vbeln
and vgpos = i_list-posnr.
select single wadat_ist into i_list-wadat_ist from likp
where vbeln = lips-vbeln.
SELECT b~wadat_ist INTO i_list-wadat_ist
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr.
MODIFY i_list.
CLEAR: i_list, lips-vbeln.
ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
SELECT avbeln sum( alfimg ) b~wadat_ist
INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
FROM lips AS a INNER JOIN
likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
AND a~vgpos = i_list-posnr
AND a~pstyv = i_list-pstyv
group by avbeln bwadat_ist.
i_list2 = i_list.
APPEND i_list2.
ENDSELECT.
IF sy-subrc <> 0.
i_list2 = i_list.
APPEND i_list2.
ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-wadat_ist IS INITIAL.
CONTINUE.
ELSE.
i_list-days = i_list-wadat_ist - i_list-erdat.
ENDIF.
MODIFY i_list.
CLEAR: i_list.
COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
IF i_list-vbeln IS INITIAL.
DELETE i_list.
ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
WHERE vbeln = i_list-vbeln
AND parvw = 'WE'.
MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_user_command = 'USER_COMMAND'
i_callback_program = g_repid
it_fieldcat = gt_fieldcat[]
it_events = gt_events[] "+ESC
it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
is_variant = g_variant
i_save = g_save
+EC1
End Addition +EC1
+EC1
TABLES
t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = g_variant
i_save = g_save
it_default_fieldcat =
IMPORTING
e_exit = g_exit
es_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF g_exit = space.
p_vari = gx_variant-variant.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
MOVE g_variant TO gx_variant.
MOVE p_vari TO gx_variant-variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant.
g_variant = gx_variant.
ELSE.
PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
ENDFORM.
FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
PERFORM display_so_order USING r_ucomm
rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
text
-->P_R_UCOMM text
-->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
WHEN '1-VBELN'.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '1-MATNR'.
SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
WHEN '1-OBD'.
SET PARAMETER ID 'VL' FIELD rs_selfield-value.
CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
EXIT.
ENDCASE.
ENDFORM. " display_sales_order
FORM EDit_table *

> TYPE-POOLS: slis.
>
> TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1,
> bkpf, bsad, bkpf_bsad,
> knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
>
> DATA: BEGIN OF i_list OCCURS 0,
> vbeln LIKE vbak-vbeln,
> posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
> matnr LIKE vbap-matnr,
> erdat LIKE vbap-erdat,
> mvgr1 LIKE mvke-mvgr1,
> wadat_ist LIKE likp-wadat_ist,
> days TYPE i,
> werks LIKE vbap-werks,
> lgort LIKE vbap-lgort,
> kwmeng LIKE vbap-kwmeng," CH01+
> lfimg LIKE lips-lfimg," CH01+
> pstyv LIKE vbap-pstyv," CH01+
> obd LIKE lips-vbeln," CH01+
> obd_pos LIKE lips-posnr," CH01+
> soldto LIKE vbaK-kunnr," JR+
> shipto LIKE vbpa-kunnr," JR+
> edatu like vbep-edatu," PR+
> END OF i_list.
>
> DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
> i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
>
> DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
>
>
> *ALV Output Header
> DATA: gt_list_top_of_page TYPE slis_t_listheader,
> prognm LIKE sy-repid,
> gc_formname_top_of_page TYPE slis_formname VALUE
> 'TOP_OF_PAGE',
> gt_events TYPE slis_t_event,
> is_layout TYPE slis_layout_alv,
> is_variant LIKE disvariant,
> it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
>
> DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
> DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER
> LINE.
>
> DATA: g_repid LIKE sy-repid,
> g_count LIKE sy-tabix.
>
> SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME
> TITLE text-t01.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t10.
>
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t11.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN: BEGIN OF LINE.
> SELECTION-SCREEN COMMENT 1(79) text-t12.
> SELECTION-SCREEN: END OF LINE.
>
> SELECTION-SCREEN END OF BLOCK block0.
>
> */ Selection and Input Parameters
> SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME
> TITLE text-001.
>
>
>
> SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
> s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
> s_matnr FOR vbap-matnr," obligatory,
> s_mvgr1 FOR mvke-mvgr1,
> s_erdat FOR vbap-erdat OBLIGATORY,
> s_werks FOR vbap-werks,
> s_lgort FOR vbap-lgort,
> s_edatu FOR vbep-edatu.
>
> PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
>
>
>
> SELECTION-SCREEN SKIP 2.
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> PARAMETERS: p_vari LIKE disvariant-variant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> SELECTION-SCREEN END OF BLOCK blocko.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> DATA: g_save(1) TYPE c,
> * g_default(1) TYPE c,
> g_exit(1) TYPE c,
> gx_variant LIKE disvariant,
> g_variant LIKE disvariant.
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
> * Initialization fieldcatalog
> INITIALIZATION.
>
> * PERFORM clear_tables.
>
> g_repid = sy-repid.
> PERFORM fieldcat_init USING gt_fieldcat[].
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> g_save = 'A'.
> PERFORM variant_init.
> * Get default variant
> gx_variant = g_variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 0.
> p_vari = gx_variant-variant.
> ENDIF.
>
> AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
> PERFORM f4_for_variant.
>
> AT SELECTION-SCREEN.
> PERFORM auth_check. "+ESC
> PERFORM pai_of_selection_screen.
>
>
>
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> START-OF-SELECTION.
>
> PERFORM get_data.
>
> PERFORM alv.
>
> END-OF-SELECTION.
>
> *----
> -
> * FORM get_data *
> *----
> -
> * ........ *
> *----
> -
> FORM get_data.
> *CH01 - Added kwmeng(order qty) to selection,
> excluded rejects
> *JR -added soldto and shipto code
SELECT a~vbeln a~posnr a~matnr a~erdat a~werks a~lgort
a~kwmeng a~pstyv b~kunnr c~edatu
CH01+
INTO corresponding fields of table i_list
FROM vbap AS a INNER JOIN vbak AS b ON a~vbeln = b~vbeln
INNER JOIN vbep AS c ON a~vbeln = c~vbeln
and a~posnr = c~posnr
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
> WHERE matnr = i_list-matnr.
> MODIFY i_list.
> CLEAR: i_list.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-mvgr1 IN s_mvgr1.
> CONTINUE.
> ELSE.
> DELETE i_list.
> COMMIT WORK AND WAIT.
> ENDIF.
> ENDLOOP.
> * CH01 - commented these lines out and redid logic
> below
> * LOOP AT i_list.
> ** select single vbeln into lips-vbeln from lips
> ** where vgbel = i_list-vbeln
> ** and vgpos = i_list-posnr.
> **
> ** select single wadat_ist into i_list-wadat_ist from
> likp
> ** where vbeln = lips-vbeln.
> *
> * SELECT b~wadat_ist INTO i_list-wadat_ist
> * FROM lips AS a INNER JOIN
> * likp AS b ON a~vbeln = b~vbeln WHERE a~vgbel =
> i_list-vbeln
> * AND a~vgpos = i_list-posnr.
> * MODIFY i_list.
> * CLEAR: i_list, lips-vbeln.
> * ENDSELECT.
> * ENDLOOP.
>
> * CH01 - Changed to select multiple delivery lines &
> del qty
> * summing the total deliveries per OBD# and date
> LOOP AT i_list.
> SELECT avbeln sum( alfimg ) b~wadat_ist
> INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
> FROM lips AS a INNER JOIN
> likp AS b ON avbeln = bvbeln WHERE a~vgbel =
> i_list-vbeln
> AND a~vgpos = i_list-posnr
> AND a~pstyv = i_list-pstyv
> group by avbeln bwadat_ist.
> i_list2 = i_list.
> APPEND i_list2.
> ENDSELECT.
> IF sy-subrc <> 0.
> i_list2 = i_list.
> APPEND i_list2.
> ENDIF.
> ENDLOOP.
> i_list[] = i_list2[].
> *End CH01
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-wadat_ist IS INITIAL.
> CONTINUE.
> ELSE.
> i_list-days = i_list-wadat_ist - i_list-erdat.
> ENDIF.
> MODIFY i_list.
> CLEAR: i_list.
> COMMIT WORK AND WAIT.
> ENDLOOP.
>
> COMMIT WORK AND WAIT.
>
> LOOP AT i_list.
> IF i_list-vbeln IS INITIAL.
> DELETE i_list.
> ENDIF.
> ENDLOOP.
> COMMIT WORK AND WAIT.
>
> *JR
> LOOP AT i_list.
> SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
> WHERE vbeln = i_list-vbeln
> AND parvw = 'WE'.
> MODIFY i_list.
> ENDLOOP.
> *END JR
>
> gt_outtab[] = i_list[].
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
> *----
> -
> * FORM alv *
> *----
> -
> * ........ *
> *----
> -
> FORM alv.
>
> PERFORM e03_eventtab_build USING gt_events[]. "+EC1
> PERFORM e04_comment_build USING
> gt_list_top_of_page[]. "+EC1
> prognm = sy-repid. "+EC1
>
>
> CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
> EXPORTING
> i_callback_user_command = 'USER_COMMAND'
> i_callback_program = g_repid
> it_fieldcat = gt_fieldcat[]
> it_events = gt_events[] "+ESC
> it_sort = it_sort[]
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> is_variant = g_variant
> i_save = g_save
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
> TABLES
> t_outtab = gt_outtab.
>
> COMMIT WORK AND WAIT.
>
>
> ENDFORM.
>
>
> *----
> -
> * FORM fieldcat_init *
> *----
> -
> * ........ *
> *----
> -
> * --> I_FIELDCAT *
> *----
> -
> FORM fieldcat_init
> USING i_fieldcat TYPE slis_t_fieldcat_alv.
> DATA: ls_fieldcat TYPE slis_fieldcat_alv.
> DATA: pos TYPE i VALUE 1.
> CLEAR ls_fieldcat.
Please note to keep on incrementing pos variable for column position.
 pos = pos + 1.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'VBELN'.
> ls_fieldcat-ref_tabname = 'VBAK'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
 pos = pos + 1. ===> after every append to field catalog.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'POSNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ETERN'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MATNR'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'MVGR1'.
> ls_fieldcat-ref_tabname = 'MVKE'.
> ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WERKS'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LGORT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'ERDAT'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'WADAT_IST'.
> ls_fieldcat-ref_tabname = 'LIKP'.
> * ls_fieldcat-key = 'X'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'DAYS'.
> ls_fieldcat-ref_fieldname = 'DAYS'.
> ls_fieldcat-seltext_s = '# Of Days'.
> ls_fieldcat-seltext_m = '# Of Days'.
> ls_fieldcat-seltext_l = '# Of Days'.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> *Begin CH01
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'KWMENG'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'LFIMG'.
> ls_fieldcat-ref_tabname = 'LIPS'.
> ls_fieldcat-outputlen = 7.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'OBD'.
> ls_fieldcat-seltext_s = 'OBD'.
> ls_fieldcat-seltext_m = 'Outbound Del'.
> ls_fieldcat-seltext_l = 'Outbound Delivery'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> * ls_fieldcat-col_pos = pos.
> * ls_fieldcat-fieldname = 'OBD_POS'.
> * ls_fieldcat-seltext_s = 'OBD Ln'.
> * ls_fieldcat-seltext_m = 'Outbound Del Ln'.
> * ls_fieldcat-seltext_l = 'Outbound Del Line'.
> * ls_fieldcat-outputlen = 10.
> * APPEND ls_fieldcat TO i_fieldcat.
> * CLEAR ls_fieldcat.
> *
> *End CH01
>
> *JR
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SOLDTO'.
> ls_fieldcat-ref_tabname = 'VBAP'.
> ls_fieldcat-seltext_m = 'Sold To'.
> ls_fieldcat-seltext_l = 'Sold To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'SHIPTO'.
> ls_fieldcat-ref_tabname = 'VBPA'.
> ls_fieldcat-seltext_m = 'Ship To'.
> ls_fieldcat-seltext_l = 'Ship To'.
> ls_fieldcat-outputlen = 10.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
> *END JR
>
> ls_fieldcat-col_pos = pos.
> ls_fieldcat-fieldname = 'EDATU'.
> ls_fieldcat-ref_tabname = 'VBEP'.
> ls_fieldcat-seltext_m = 'Requested Delivery date'.
> ls_fieldcat-seltext_l = 'Requested Delivery date'.
> ls_fieldcat-outputlen = 20.
> APPEND ls_fieldcat TO i_fieldcat.
> CLEAR ls_fieldcat.
>
>
> *FOR ALV SORT & SUBTOTAL
> CLEAR it_sort.
> it_sort-spos = '0'.
> it_sort-fieldname = 'VBELN'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '1'.
> it_sort-fieldname = 'POSNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> it_sort-subtot = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '2'.
> it_sort-fieldname = 'MATNR'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> CLEAR it_sort.
> it_sort-spos = '3'.
> it_sort-fieldname = 'MVGR1'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
> *
> CLEAR it_sort.
> it_sort-spos = '4'.
> it_sort-fieldname = 'ERDAT'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-up = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
>
> CLEAR it_sort.
> it_sort-spos = '5'.
> it_sort-fieldname = 'WADAT_IST'.
> it_sort-tabname = 'GT_OUTTAB'.
> it_sort-down = 'X'.
> * it_sort-subtot = 'X'.
> APPEND it_sort.
>
> *
> * CLEAR it_sort.
> * it_sort-spos = '6'.
> * it_sort-fieldname = 'PERNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> *
> * CLEAR it_sort.
> * it_sort-spos = '7'.
> * it_sort-fieldname = 'VORNA'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '8'.
> * it_sort-fieldname = 'NACHN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '9'.
> * it_sort-fieldname = 'VKGRP'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '10'.
> * it_sort-fieldname = 'VBELN'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '11'.
> * it_sort-fieldname = 'ERDAT'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
> * CLEAR it_sort.
> * it_sort-spos = '12'.
> * it_sort-fieldname = 'BEZEI'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> ** it_sort-subtot = 'X'.
> * APPEND it_sort.
> *
>
> * clear it_sort.
> * it_sort-spos = '1'.
> * it_sort-fieldname = 'BELNR'.
> * it_sort-tabname = 'GT_OUTTAB'.
> * it_sort-up = 'X'.
> * append it_sort.
>
>
> ENDFORM.
>
> *----
> -
+EC1
> * Addition +EC1
> *----
> -
+EC1
> *&----
> -
> *& Form VARIANT_INIT
> *&----
> -
> * text
> *----
> -
> * --> p1 text
> * <-- p2 text
> *----
> -
> FORM variant_init.
> *
> CLEAR g_variant.
> g_variant-report = g_repid.
> ENDFORM. " VARIANT_INIT
>
>
>
> *----
> -
> * FORM f4_for_variant *
> *----
> -
> * ........ *
> *----
> -
> FORM f4_for_variant.
> *
> CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
> EXPORTING
> is_variant = g_variant
> i_save = g_save
> * it_default_fieldcat =
> IMPORTING
> e_exit = g_exit
> es_variant = gx_variant
> EXCEPTIONS
> not_found = 2.
> IF sy-subrc = 2.
> MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
> WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
> ELSE.
> IF g_exit = space.
> p_vari = gx_variant-variant.
> ENDIF.
> ENDIF.
> ENDFORM.
> *&----
> -
> *& Form PAI_OF_SELECTION_SCREEN
> *&----
> -
> * text
> *----
> -
> FORM pai_of_selection_screen.
> *
> IF NOT p_vari IS INITIAL.
> MOVE g_variant TO gx_variant.
> MOVE p_vari TO gx_variant-variant.
> CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
> EXPORTING
> i_save = g_save
> CHANGING
> cs_variant = gx_variant.
> g_variant = gx_variant.
> ELSE.
> PERFORM variant_init.
> ENDIF.
> ENDFORM. " PAI_OF_SELECTION_SCREEN
> *----
> -
+EC1
> * End Addition +EC1
> *----
> -
+EC1
>
>
> *----
> -
> * FORM e03_eventtab_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E03_LT_EVENTS *
> *----
> -
> FORM e03_eventtab_build USING e03_lt_events TYPE
> slis_t_event.
> DATA: ls_event TYPE slis_alv_event.
>
> CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
> EXPORTING
> i_list_type = 0
> IMPORTING
> et_events = e03_lt_events.
> READ TABLE e03_lt_events WITH KEY name =
> slis_ev_top_of_page
> INTO ls_event.
> IF sy-subrc = 0.
> MOVE gc_formname_top_of_page TO ls_event-form.
> APPEND ls_event TO e03_lt_events.
> ENDIF.
> ENDFORM.
>
> *----
> -
> * FORM e04_comment_build *
> *----
> -
> * ........ *
> *----
> -
> * --> E04_LT_TOP_OF_PAGE *
> *----
> -
> FORM e04_comment_build USING e04_lt_top_of_page TYPE
> slis_t_listheader.
> DATA: ls_line TYPE slis_listheader.
>
> *Report Title
> CLEAR ls_line.
> ls_line-typ = 'H'.
> ls_line-info = text-007.
> APPEND ls_line TO e04_lt_top_of_page.
> *
> *
> **Doc Type Desc.
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-008.
> ** ls_line-info = p_matnr.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-009.
> ** ls_line-info = p_werks.
> * append ls_line to e04_lt_top_of_page.
> *
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-010.
> ** ls_line-info = p_stlan.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-011.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
> *
> * clear ls_line.
> * ls_line-typ = 'S'.
> * ls_line-key = text-012.
> ** ls_line-info = p_stlal.
> * append ls_line to e04_lt_top_of_page.
>
>
>
> ENDFORM.
>
> *----
> -
> * FORM top_of_page *
> *----
> -
> * ........ *
> *----
> -
> FORM top_of_page.
>
> CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
> EXPORTING
> it_list_commentary = gt_list_top_of_page.
>
>
> ENDFORM.
>
> *----
> -
> * FORM auth_check *
> *----
> -
> * ........ *
> *----
> -
> FORM auth_check.
>
> AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
> ID 'VKORG' FIELD p_vkorg.
> IF sy-subrc NE 0.
> MESSAGE e054 WITH p_vkorg.
> ENDIF.
>
>
> ENDFORM. " auth_check
>
>
> *&----
> -
> *& Form USER_COMMAND
> *&----
> -
> FORM user_command USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE r_ucomm.
> WHEN '&IC1'.
> PERFORM display_so_order USING r_ucomm
> rs_selfield.
>
> ENDCASE.
>
> ENDFORM.
>
> *&----
> -
> *& Form display_sales_order
> *&----
> -
> * text
> *----
> -
> * -->P_R_UCOMM text
> * -->P_RS_SELFIELD text
> *----
> -
> FORM display_so_order USING r_ucomm LIKE sy-ucomm
> rs_selfield TYPE slis_selfield.
>
> CASE rs_selfield-sel_tab_field.
> WHEN '1-VBELN'.
> SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
> CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
> WHEN '1-MATNR'.
> SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
> CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
> WHEN '1-OBD'.
> SET PARAMETER ID 'VL' FIELD rs_selfield-value.
> CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
> WHEN OTHERS.
> MESSAGE i000(z1) WITH 'Please Click on the Valid
> Selection'.
> EXIT.
> ENDCASE.
>
>
> ENDFORM. " display_sales_order
>
> *----
> -
> * FORM EDit_table *
> *----
> -
> * ........ *
> *----
> -
Message was edited by: Anurag Bankley

HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

hi
HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
i want to display this field in my report. what is the fieldname and in which table it is ?

Hi Jyothsna,
There are 2 dates when you say Requested Delivery Date
1. Header level in VBAK-VDATU is the field
2. At item level it is in the schedule line. VBEP-EDATU.
The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
regards,
Advait Gode.

How to block the Statistical delivery date in purchase order from updation

Hello All,
We have the following requirement from our client.
The client wants to track the delay in delivery of purchase orders raised to vendors. Currently the users, change the delivery date and then process the PO if there are any delays. The client wants to STOP this and track any changes being made.
We created a new screen layout for purchase orders and checked the Statistics relevant delivery date as DISPLAY
However, when we tested the same, the statistical delivery date was changed along with delivery date, when the delivery date was changed in the Purchase order, though the option for statistical delivery date was seen a DISPLAY field only.
Please provide us your suggestions on any other options available.
R's
Manoj.

if your client wants to track the delay of a delivery from your vendor, then he has to give the vendor a chance that he can deliver on time. And the usual way to do this is by sending the PO to the vendor.
if you cange the delivery date before output of messagem then your vendor could not even know the original delivery date, so it is not the vendors fault if he cannot meet this date.
if you change the delivery date after output of message , then the statistical delivery date will stay with the old date.
the field is always open to maintain because it is not always the vendor who is reponsible for a delivery date change.
if you want to change the delivery date because you can take the quantity at that date, then it is not the vendors fault, in this case you have to change the statistical delviery date to evaluate the vendors delivery performance against the new date.
And often forgotten in this evaluation process is the warehouse personell that finally posts the goods receipt. if they post it with delay and do not change the goods reeipt date, then the vendor is as well evaluated to bad.

To Blank out system default requested delivery date when create Sales Order

Hi Experts,
I am facing a problem when create Sales Order doc copy with reference to a contract.
The create with reference screen under the Contract tab, SAP default with current date as the Requested delivery date.
Is there any way to blank out this default as I need to use the requested delivery data in the contract doc ?
Many Thanks.
Regards,
Xavier

Hi,
Try this--
While defining the Contract sales docment type in VOV8, uncheck the proposed delivery date field in the tab Requested delivery date/ reqested pricing date/reqested prchase order date
I will not propose the system date and leaves the field blank
you can enter the required delivery date.
Hope this will work
regards,
santosh

How do I unlock my iPod touch when it has been disabled?

How do I unlock my iPod touch when it has been disabled? My children can't remember the four digit pass code they entered and it is now disabled.

Recovery mode...
http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Twitter app - 'The request is understood, but it has been refused'

I'm having an issue with the Twitter app for my Blackberry Curve 8520.
Basically I've been having problems with the app for a while now (various things not working/loading), but yesterday I received a message saying 'The request is understood, but it has been refused' when I tried to refresh my Twitter timeline. I kept getting this message, and the timeline never loaded.
I then signed out of my Twitter account and attempted to log in again. I received the same message again and am now unable to sign into my account at all.
I've re-installed the app at least three times and have done numerous restarts on my Blackberry (removing the battery so that it restarts itself), which has not fixed the issue.
This is really irritating because I use the Twitter app for my Blackberry on a regular basis. If anyone else has experienced this issue or better yet knows of a way to fix it I would be very pleased.
Thanks guys.
Solved!
Go to Solution.

I deleted the app and started over and it now seems to work.

How to change the schedule line date in SO with reference to value contract

Hi SD Guru's,
I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
I can not add to user exit MV45AFZZ , because order that was created with reference to the value contract, does not go through this user exit.
Do you have some ideas where i can add it?
Thanks and Regards
Viky
Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

Hello Viky
How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
Does the program go through these exits when an order is created with ref to a value contract??
Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

How to change the default "no data found"

Hi,
Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
Thanks

Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
Scott

User Exit/Badi to change the billing plan date when create sale order

Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.

Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh.

How to change the requested delivery date when approval has been done

Similar Messages

Maybe you are looking for