How to change the resolution on my Boot & Login Screen, There low resolution ?

Hi guys, Ok the situation I have is my Boot & Login Screen are at a Low resolution something like a 640 X 480, were my Desktop resolution is at 1280 X 1024, at 75 Hz, both of these were right until I updated from OSX 10.5.6 to OSX 10.5.8; from there on I have been getting this low resolution screen, an they are driving me crazy, is there any way to put them back as they were? Any assistance will be greatly appreciated. 73's

Hi, no idea how to cure it, but have noticed that it sometimes corrects itself, or after doing I don't know what... perhaps toggling the Display res a few ties until it "feels" safe about a certain rez???

Similar Messages

Is there a way to hide users from the FileVault 2 ''main boot'' login screen?

After your entire disk is encrypted with FileVault 2, there is a now a ''main'' boot login screen with users displayed--after a full shutdown/restart--as opposed to a ''normal'' login screen when logging users in and out after booting into FileVault 2.
If that made any sense...there was a way to hide users from the ''normal'' login screen before by running this Terminal command:
sudo defaults write /Library/Preferences/com.apple.loginwindow \ HiddenUsersList -array-add xxxx
(xxxx being a short user's name)
How do I do this now for the login screen that comes up on a full/shutdown restart?

Not really, but you can move them from the home screen to, say, the 4th, or 10th screens. But you do need to have at least one app in every screen on the phone. My idea was to have several blanks before the screen with her apps, but the phone doesn't allow this.
Sounds like time for the Iron Fist. ::grin:: Putting your foot down. Funny how those two descriptions don't quite match up. Our 5 year old son loves to use the iPhone, and with consistent training we have minimal trouble when he doesn't want to quit.
Have a great trip. Joel.

Startup login screen at low resolution

-Problem: low resolution of login screen after power on.
-Additional info: If I log into the computer and log out, the login screen is back at high resolution
-Cause: I connected the mac pro via mini dvi to a low resolution beamer
Then I turned off the computer and now I'm stuck with this problem
- Helppp

Etienne TSS wrote:
Thanks for the advise. I was about to follow your instructions. Then came along another advise which seems to be less risky.
glad you fixed it but FYI resetting PRAM is NOT a risky operation. it's quite on par with just turning the computer off/on. it's an absolutely standard troubleshooting procedure which carries zero risk.
That solved the problem
However, I'm thankful for your effort in trying to help me. And I'll remember that the dvd-region setting will remain after a reset.
Thanks again

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to change the caption in data entry selection screen??

using cats0009 i populated the data into wbs desc and a/a desc but
but i am not able to change the name(caption of additioanl field) as 'wbs description'. and A/A desciption.
can anyone please help me out how to do this...

You don't mean selection text do you? Can you be more specific?

How to change the   Success Message for Personal Data Screen in ESS

Hi,
       While saving the Personal Data in the ESS I want to chage the Success message.When I check the DC , Message Class i am not able to find the the particular string.Can any one please guide how to find the Success Message String   for this Personal Data Screen or Which BAPI I have to check .
Regards
Alexi

Hi iidhya ,
Please find the code below
    public boolean onEvent( )
    //@@begin onEvent()
    String event = fpm.getEventData().getEventName();
          if (event.equals(IFPM.EVENT_ADD)){
               wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
          }else if(event.equals(IFPM.EVENT_EDIT)){
               wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          }else if(event.equals(IFPM.EVENT_REMOVE)){
               wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          return true;
    //@@end
Regards
Alexi

Why is the resolution of my Lion login screen so low?

I just turned on my MacBook Air, and I found that the login screen was enlarged, in which it seemed to me that the resolution of the login screen was very low. But after logging in, the resolution went back to normal. How can I fix this?

So the pictures hardly show a difference, but both my friend and I agree that there is a clear differene the picture quality of my laptop and the monitor.
Also, the photos are too large to be uploaded here.
Laptop:
http://i1131.photobucket.com/albums/m559/AaronAAA/laptop.jpg
Monitor:
http://i1131.photobucket.com/albums/m559/AaronAAA/original.jpg

[Solved] -Change the background image of gdm login screen.

When I first installed Arch I found that the default background image of gdm login screen ( or lock screen ) didn't look good with the desktop image that I had, so when I installed I looked for a way to change this. Sadly I could not find any direct and easy way, I looked in forums, I looked in gconf-editor and I could not find any relevant information about it. So I decided to look for the file and change it.
This was not the best option, clearly since now that I installed Gnome 2.30 it replaced the image with the old one and I had to change the file again. Since maybe some other people are having similar problems I thought I could just post the place where gdm is looking for the file, and if somebody has any suggestions about how to change it with a better way, I would welcome it .
After the longest intro to a directory, here it is: /usr/share/pixmaps/backgrounds/gnome/background-default.jpg
Thank you .
Last edited by agomezh (2010-04-11 18:53:09)

Not to belabour the point, but after much hair pulling, I stumbled upon the following method, and it works perfectly. It sets the default background (for GDM login, Lock, desktop...etc.) for Gnome to whatever you want--even new users get the new default background on their desktop, although they can obviously change it, this is only the default. The page also shows a method of doing the same as gnome-appearance-properties method with just gconftool-2. I hope this doesn't just cause confusion.
[Note: It still has to be run as root of course. I used sudo.]
http://library.gnome.org/admin/system-a … n#gconf-20
gconftool-2 --direct \
--config-source xml:readwrite:/etc/gconf/gconf.xml.defaults \
--type string \
--set /desktop/gnome/background/picture_filename some_picture_filename.png

MBP Retina Filevault login screen is low resolution all of sudden

Hey guys, so I did the few software updates today to get ready for Mountain Lion and I started to notice that all of a sudden now my filevault enabled login screen (the one that's all grey and you see before even booting up the operating system) is in low resolution! Since i've had my MBPr it's always been in glorious retina resolution, and now it's all low res.
Anybody else encountered this problem or know of any fix? I'd appreciate it!
Best,
Oliver

I've got the same problem on mine after changing the resolution several times. I've just applied 10.8.2 but still have the same issue.
Havent found anybody else seeing the same thing apart from here. I'm going to try de-crypting the Mac and encrypting again to see if that fixes it. There must be some way to change it though.

Report Painter-How to change the order of fields on selectn screen.

I have a custom Report Painter report that has 2 fiscal years 1 current FY and 1 Comparison FY. This also includes 2 sets of periods. I want the period fields to group together by Fiscal Year and Comparison Year. As shown below.
Fiscal Year From Period___
Fiscal Year To Period____
Comparison Year From Period____
Comparison Year To Period____
Instead it displays as follows:
Fiscal Year From Period___
Comparison Year From Period____
Fiscal Year To Period____
Comparison Year To Period____
Any assistance would be greatly appreciated.

I have a custom Report Painter report that has 2 fiscal years 1 current FY and 1 Comparison FY. This also includes 2 sets of periods. I want the period fields to group together by Fiscal Year and Comparison Year. As shown below.
Fiscal Year From Period___
Fiscal Year To Period____
Comparison Year From Period____
Comparison Year To Period____
Instead it displays as follows:
Fiscal Year From Period___
Comparison Year From Period____
Fiscal Year To Period____
Comparison Year To Period____
Any assistance would be greatly appreciated.

Cisco ASA 5505: How to change the default OS

Hello,
I'm learning how to work on the Cisco ASA 5505. My machine has two OS images: the old 7. whatever image and a more recent 8.2 image. The 8.2 image is lower in the index on disk0 so whenever I reboot the machine, the start up points it towards the older image and I have to go into ROMMON to boot the newer OS. Could someone please guide me on how to change the position of the newer OS so that it's the default image? I'd like to do this without deleting the older image so that I can have a proof of concept.
Thank you!

Hi Colin,
You could use the 'boot system' global command to force the ASA to the pointed image file.
boot system flash:/image.bin
Sent from Cisco Technical Support iPhone App

How to change the title of an object in the build order window?

In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
I'm running the following:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5

Custom names can't be applied to objects in the build list.
They are labeled as either; text, shape, table, chart or the filename of an image

How to change the tempo in ultrabeat

I simply want to know how to change the tempo of a beat to the desired speed... all i can see thus far is under resolution, 1/12, 1/16, etc. But I want to match the tempo with a sample I am using which I have pasted onto an audio track.. and those increments obviously are insufficient in getting me the desired speed...
some assistance would be greatly appreciated.. thanks

Check your metronome settings first. Either click hold, or right (command) click on the record button.
If everything checks out there, go to your mixer. Check the all (single, arrange, all) button. You should now be able to see instrument track #256 Klopfgeist (sp?). Maybe you deleted it? Add it. Also check it's output is set to the correct channel.

How to change the mac address of thunderbolt to ethernet adapter?

Hello everyone,
I am using Macbook pro retina display 2013 version. I have bought a thunderbolt to ethernet adapter in order to connect my Macbook to LAN. But in my area there is a shared line and I have to clone their mac address to my Macbolok. I could not change the mac address of my thunderbot to ethernet adapter. Can anyone please tell me how to change the mac address of thunderbot to ethernet adapter step by step??
Thanks in advance.

Open terminal and type the followings;
1) sudo ifconfig bridge0 ether xx:xx:xx:xx:xx:xx(it will be your new mac address)
2) Type your password to confirm
3) ifconfig bridge0 |grep ether (to see if change is successful)
PS: *This should with your thunderbolt adapter, but its not working usb to ethernet adapters without installing required drivers.
** You may need to do these steps every time you boot your mac.

How to change the pixel dimension height?

I need to fix the pixel dimension height "768" for tiff images via scripting. Kindly advise me how to change the height for the images.

i am using vb.net i can't able to fix exact width and heigth for my below code
appref.Preferences.RulerUnits = Photoshop.PsUnits.psInches
docref = appref.Open(CheckerPath.Path & \" & InputFile_From_Illust)
TiffSv.ImageCompression = Photoshop.PsTiffEncodingType.psTiffLZW
docref.SaveAs(IllustFolder + "\" + IllustFile.Name, TiffSv)
docref.ChangeMode(DestinationMode:=Photoshop.PsChangeMode.psConvertToRGB)
TiffSv.EmbedColorProfile = False
Dim heg, wid As Double
heg = 768 / 300
wid = 576 / 300
docref.ResizeImage(wid, heg, Resolution:=300)
But its fixing width as 0.46 and height as 0.613 why its happen i don't.
please advise me.

How to change the resolution on my Boot & Login Screen, There low resolution ?

Similar Messages

Maybe you are looking for