How to change the sound configuration.

I am really no good at computers and just recently accidentally changed the audio speaker setting making everything that I listen to higher in pitch. My MSI box says K8N Neo4 (whatever that means) if that helps, please tell me how I open the audio speaker setting so I can change it back!
Please help!

Run Realtek manager and configure speakers configuration from there.

Similar Messages

How do change the sound level input at the premiere cs6

Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel Conde

The input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html

Portege S100: How to change the RAID in the BIOS

Changing the BIOS setting for Portege S100 from JBOD to RAID0, I hit space on Exectute Creation and enter the string key in the manual and press "enter".
The settings then return to existing settings and not the new RAID0 setting I selected.
I have been at this most of the day / evening looking at various posts, but I can see nothing wrong with the details entered.
It is the same as recorded in this link:-
[How to Change the RAID configuration|http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]
I am now at the end of my tether, I only wanted to install new WD HDD and do fresh install of XP Pro, is that too much to ask?

Maybe its a silly question but; did you install the second HDD in the Ultra Slim Bay?
The RAID feature is ONLY available when a second HDDD is installed in the Ultra Slim Bay.
If the second HDD has been inserted then you could change the RAID in Windows OS.
There should be a Toshiba RAID Console.
You can use this console to create or manage a RAID array.
To start the utility click Start, point to All Programs, point to Toshiba, point to RIAD and click RAID console.
Its possible to change RAID1 (mirroring) from a non-RAID configuration (default).
But note; when RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.

How can I change the sound of push notifications on an iPhone 4 running with iOS5?

How can I change the sound of push notifications?
In settings > sounds there are various options but not the a possibility to change the general sound (!!!) of push notifications.
Example: How can I change for instance the sound of the push notification of for example the New York Times notifications.
Thanks for the help!
Product: iPhone 4 running with iOS5

What you see - what is available for this is what you get.

How to change the connection pool configuration on OC4J?

Hi everybody,
I am developing an application with JDeveloper which is running on an OC4J standalone server, we have 2 enviroments, the develop server and the server of the client, and the data base connection configurations are differents.
The problem is that if we try to deploy the application (we have deploy on the develop server) on the client server and try to change the connection pool configuration the application cannot connect to the data base, we need to re-build the project with the client connection pool configuration.
We tried to change the configuration on the enterprise manager of the OC4J, on "JDBC Resources" panel, and the test the connection is ok, but when try to access to the application we get an Exception. After that we try to do that changing the parameters from the datasources.xml file on the application, but the result is the same.
How can we change the DataBase configuration without re-build the project?
Thanks very much
Tony

Meaning you have created just the empty data-sources.xml and not configured any Connection Pool and DataSource in JDev?
In Oracle AS 10.1.3 you have two ways to do this:
1. Use JDev and configure the data-sources.xml (Context Menu -> Properties)
2. In Oracle AS: Select application -> Administration -> Services -> JDBC Resources -> Create Pool and Create DataSource
--olaf

How do I change the sound that is played when you iI use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

How do I change the sound that is played when you I use the Find my IPhone feature to make it alot louder? The current sound is very faint, difficult to find as I am hard of hearing.

Hi,
Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
Make sure the iPad speakers are selected, not your wireless.
Carolyn

How to change the portal user id 's assigned employee in ESS configuration

Hello Gurus,
I now have a question related to ESS configuration. I want to know how to change the Portal user's pernr assignment in the ECC 6.0 system. Somebody had actually assigned my portal user ID a PERNR in the ECC 6.0 system. But now, for test purposes, I want to change the PERNR assignment to something else for my portal user id.
Could any of you please guide me in doing these steps?
Points will definitely be awarded for helpful answers.
Thanks gurus in advance for your help.
~~LB

Hi Leena,
You can create a new user name with the username and password assigned to it, with the transaction SU01.
Ex : ESS_USER1
Go to transaction code : PA30.
Enter the pernr you want to assign to the user ESS_USER1 that you have created earlier.
Enter infotype number : 105
Now go ahead and click on the change button.
And assign the user name as ESS_USER1.
Then the pernr number will be assigned to the ESS_USER1 that you have created.
You can check the same when you go to the HRUSER transaction code.
Please let me know if you still have any issues on the same.
Cheers.
Sandeep

I have an IPhone 5 with 2 email accounts and I can't seem to change the sound for my primary account. When I change the sound it is for my secondary email account which I hardly use. How do I change the sound for my primary account?

I have 2 email accounts on an IPhone 5 and can't seem to change the sound for my primary email account.

Try going to Settings>Notifications>Mail, tap your primary account, then tap New Mail Sound and set as desired.

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the default servcie port number to be checked for the IPS sig

Dear
i have an AIP-SSM (IPS) installed in a an ASA firewall.
i have configured an access-list in the firewall to forward the traffic coming from the internet toward the internal server to be checked by the IPS module.
but the case is that the services have to be checked is not the default services port numbers.
http port is 8081
oracle port is 2006
and many other services.
the question now, is how to change the default service number in the IPS in order to be checked by the corresponding service signatures?
Thanks

You would set those as part of the signature variables.
http://www.cisco.com/en/US/docs/security/ips/6.1/configuration/guide/cli/cli_signature_definitions.html#wp1040009

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How to change the midp version in ktoolbar of wireless toolkit 2.1

Hi
How to change the version of midp in ktoolbar of wireless tool kit 2.1
though i tried to change the platform by selecting midp1.0 from settings
dialog box iam geeting alert:BadVersion Error
and the application is terminated abruptly
do i need to change any configuration files
please suggest me
as it is very urgent

The version of Java inside the database? If so - Not recommended at all ... the environment is NOT the same as your grandfathers JRE and there are a few noteworthy conditions.
How much of the Oracle Java Developer's Guide have you reviewed? http://www.oracle.com/pls/db102/to_toc?pathname=java.102%2Fb14187%2Ftoc.htm&remark=portal+%28Books%29

How to change the characteristics of a Batch

Dear All,
We have maintained a batch sort sequence based on Batch Manufacturing date.
But now customer wants the batch to be sorted out based on Batch Number.
How to change the Characteristics from Batch Manufacturing date and Batch Number?
Please do suggest.
For example, we have two characteristics assigned to the Class One is Manufacturing date and another is Batch Number.
How system will sort out a batch based on these two logic.
Kindly explain.
Regards,
Mullairaja

Hi Mullai,
I hope you know what do you mean by "Dependencies" in variant configuration. These are created for automatic update of characteristic values. If you want to delete the characteristic from the class, please do teh following.
1. Find out that there are any dependencies assigned to this characteristic. If so remove the assignment
2. Then you have to check if this characteristic is used in any dependency in the code. If so, find the implications of the same.
In case, you dont know what is dependency, may be they are not used in your project. In this case, you can just remove the characteristic from the class.
It has got one effect.
At present, a configured batch will have this characteristic. If you go to the batch master in change mode, then the old classification will be replaced by the new classification. So the deleted characteristics will not be available to you anymore. I hope that is fine with you. If this is fine, then you dont need to worry about removing the characteristic from the class.

How to change the sound configuration.

Similar Messages

Maybe you are looking for