How to change the source type for a primary key on a form?

Hi,
At the time of creating a form, I had set the source type for the primary key to an existing sequence.
Now I want to change the source to a trigger.
Can anyone suggest how to do it?
Thanks in advance,
Annie

Annie:
Define the trigger and then delete the page process named 'Get PK'
Varad

Similar Messages

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

How to Change the Font Type for Printing Pocket Address Book?

I am new to the Mac and was entering in my contact info into the Address Book in hope of creating a Pocket Address Book (PAB). When I attempt to print out the PAB the default font is courier. When I click on "set" and access other font types, sizes, etc., I can't seem to find a way to apply or save the font type that I choose. In short, it stays as courier. I found an archived thread in a forum that suggests to validate the font I want - which I did and it was already validated - and otherwise I cannot seem to change it from courier. Any help on how to get the font I select to be applied instead of courier would be GREATLY appreciated!

You can also change it using the UIManager:
UIManager.put("OptionPane.foreground", Color.red);
UIManager.put("OptionPane.messageForeground", Color.red);
For a complete list of all properties you can change for each component check out this program:
http://www.discoverteenergy.com/files/ShowUIDefaults.java

How to change the NAT type for 2 on the ps3

hey, i have a airport extreme and I'm playing ps3 and my NET type is 3 and i want to change for Nat type 2 , do you guys know how can i do it. thanks

VPI / VCI
Protocol
PPPoE
Bridged Ethernet
User ID
Example: [email protected]
Password
Confirm Password
Static IP Address
Primary DNS Server
IP Gateway
Secondary DNS Server
Domain Name
this is what appears what should I do?

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

How can we change the valuation type for a material created.

How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guide

Hi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba

How to change the file type from IMOVIE PROJECT to other types of file

how to change the file type from IMOVIE PROJECT to other types of file??
thank you very much for your help=]

I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

How to change the paper type in printer settings?

Does anyone know how to change the paper type in printer settings? I'm trying to have the ability to change it to photo paper from Photoshop Elements. I can't find the option in printer settings or through Elements. I'm assuming I could save an additional printer setting for photo printing, but can't find how to even select a different paper type.
thanks!

It would help to know which OS you are running as the answer will be different if it's Lion or the previous OS's. You are not running iOS 5.0.1 on your MacBook Pro so provide the correct information.

How to change the source level in java Studio creator

Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.

Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman.

How to change the project type of inprogress project

How to change the project type of in-progress project, The project type is Testing and need to change it to basic project plan.

Another way is to click on the top right button of the project center ribbon, after selecting the project. Note that this way works for one project at a time whereas toon's reply works for bulk edit.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

How to change the billing type Rv to DG

Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethan

Hi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to change the source ip address

hi all,
i got the problem that how to change the source ip address when i
get a website's page!
i mean i want to change the source ip address when i access the
remote website, sure i know when change the source ip, i can not get
the result correctly when changing the source ip address, but it is not
important to get the result i just want to send out a "click" event to the website by calling a post method in the site!
does anybody have some ideas?
Best Regards,
Eric Gau

Here's some code that connects to google and does a get:
import java.io.*;
import java.net.*;
public class HTTPTest {
    private Socket sock;
    private BufferedReader in;
    private BufferedWriter out;
    private boolean running = false;
    HTTPTest() {
    private void go(String site) {
        try {
            sock = new Socket(site, 80);
            in = new BufferedReader(new InputStreamReader(sock.getInputStream()));
            out = new BufferedWriter(new OutputStreamWriter(sock.getOutputStream()));
            System.out.println("Connected");
            out.write("GET / HTTP/1.1\r\n\r\n");
            out.flush();
            doRead();
        } catch (IOException e) {
            e.printStackTrace();
    private void doRead() {
        running = true;
        String line;
        System.out.println("Read started");
        while (running) {
            try {
                line = in.readLine();
            } catch (IOException e) {
                e.printStackTrace();
                line = null;
            if (line == null) {
                running = false;
            } else {
                System.out.println(line);
        System.out.println("Socket closed");
    public static void main(String [] args) {
        String site;
        if (args.length > 0) {
            site = args[0];
        } else {
            site = "google.ca";
        new HTTPTest().go(site);
}

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

How to change the source type for a primary key on a form?

Similar Messages

Maybe you are looking for