How to change the standard time in ical

Hi!
When I create a new date in iCal, which is after 4 pm, iCal alway wants to set the ending of this date automatically on the next day. ( 8 hours standard)
how can I change the preferrences for creating a new date less than 8 hours, for example 4 hours? Do I have to change it in the terminal?
Many, many Thanx in advance!!!

Hi!
When I create a new date in iCal, which is after 4 pm, iCal alway wants to set the ending of this date automatically on the next day. ( 8 hours standard)
how can I change the preferrences for creating a new date less than 8 hours, for example 4 hours? Do I have to change it in the terminal?
Many, many Thanx in advance!!!

Similar Messages

  • How to change the default time?

    when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

    Please see the following link for information on configuring the interdigit timeout.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
    Hope this helps. If so, please rate the post.
    Brandon

  • How to change the standard layout sets in ALV List

    Hi Gurus,
    How to change the standard layout sets in ALV list.
    Is there any standard program ? or specific way to acheive this?
    Kindly drop some clues?Every valuable clues rewarded more points........
    Thanks in Advance,
    Dharani

    Hello Dharani
    All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
    LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
    LVC_VARIANT_EXISTENCE_CHECK
    LVC_VARIANT_F4 (Display variant selection dialog box)
    LVC_VARIANT_SELECT (Read a display variant)
    For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
    Regards,
      Uwe

  • On iCal,how to change the travel time mode from car to foot?

    on iCal (Mavericks), how to change the traveltime mode before an event ? i only have the "time" choice with "5 min, 15 min, 30 min, 1 hour, 2 hours". I would like to choose  "foot/walking" , "car" or "Train/bus".

    America is only one of 197 countries in the world. So if you do not use a bike, your feet or public services to travel so, maybe 196 other countries do it :-)

  • How to change The Standard JOptionPane Icon?

    in this simple code
    i want to change the Standard JOptionPane icon to a different icon
    how could it be?
    thank you
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.WindowListener;
    import java.awt.event.WindowEvent;
    import javax.sound.sampled.*;
    import javax.swing.JPanel;
    import javax.swing.JFrame;
    import javax.swing.ImageIcon;
    import javax.swing.Icon;
    import java.awt.event.*;
      public class MyFrame extends JFrame 
    JLabel label=new JLabel("Hello");
      MyInner inner;
          MyFrame ()
            setupGUI();
        private void setupGUI()
           JFrame f =new JFrame();
        //   f.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
           f.setTitle("Window Event");
            f.setSize(550,350);
            f.setResizable(false);
            f.setLayout(new BorderLayout());
            f.add("Center",label);
            f.show(true);
             inner=new  MyInner();
             f.addWindowListener(inner);
                   class MyInner extends WindowAdapter
           public void windowClosing(WindowEvent ee)
                         Toolkit tool = Toolkit.getDefaultToolkit();
                  tool.beep();
                      JOptionPane.showMessageDialog(null, "Nice Work! " );
                      System.exit(0);
          public  static void main(String[]args)
             MyFrame frame=new MyFrame ();
    }

    For instance:
        class MyInner extends WindowAdapter
            public void windowClosing(WindowEvent ee)
                Toolkit tool = Toolkit.getDefaultToolkit();
                tool.beep();
                JOptionPane.showMessageDialog(null, "Nice Work! ");
                ImageIcon myImageIcon = new ImageIcon("myPic.jpg"); // needs proper path here
                JOptionPane.showMessageDialog(null, "Better Work!", "Dang, I'm smart!", JOptionPane.ERROR_MESSAGE, myImageIcon);
                System.exit(0);
        }

  • How to change the system time in (E-Business Suite)

    Hi,
    I need to change the system timings in E-Business Suite.
    My Database & Application is on different nodes..
    How could i change system timings on both...
    Thanks,
    Alig

    Alig,
    Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
    The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
    Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
    The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
    Thanks,
    Hussein

  • How to change the standard data type in xi

    Hi,
    presently we have SCM.i want to change the standard data type i.e" Replinishment order notification ".i want to change the length of the field .
    but there is no edit option for that data type.
    i even modified Software component version( http//sap.com/xi/scmbasis/global)with objects are original objects and objects are modifible(tick the check box)
    thanks in advance.
    atmakur

    Hi Atmakur,
      <i>i even modified Software component version( http//sap.com/xi/scmbasis/global)with objects are original objects and objects are modifible(tick the check box)</i>
        After doing this have you activated the change list? If not please do it and refresh it..and try to open..it will work..
    Regards,
    Prasanthi.

  • How to change the screen time on 2330c.....

    is there any option to change the screen time from center to a top end.....?
    Solved!
    Go to Solution.

    Date and timeSelect Menu > Settings > Date and time.To set the date and time, select Date and time settings.To set the formats for date and time, select Date and time format settings.To set the phone to update the time and date automatically according to the current
    time zone, select Auto-update of date & time (network service). 
    here is online guide which may contain more info
    http://nds1.nokia.com/phones/files/guides/Nokia_2330_classic_en.pdf
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to change the defrag times

    Can you change the defragmentation times because i dont want to leave my laptop on all night?

    MartyFromTauranga wrote:
    Can you change the defragmentation times because i dont want to leave my laptop on all night?
    There is no need to leave the MBook on over night. There are a couple of clean-up-scripts starting if the system is idle (cpu usage is under a specific value) and if system starts up / shoot down.
    If you (like I do) let the system run for weeks, by only putting the Mac to sleep state, it could be necesary to let the Mac run to idle state (first close all unneeded applications) every two weeks or so for a while.
    The HFS+ filesystem needs no "defrag" as HFS+ optimizes the filestructure "on the fly" when deleting or adding files to the drive.
    HFS+ uses a number of optimizations to the allocation algorithms in an attempt to defragment files while they are being accessed without a separate defragmenter.
    If (very unlikely in normal operations) the filesystem does become fragmented, the only way to defragment it is to use a 3rd Party tool; or to wipe the hard drive completely and install the system from scratch.
    Cheers - Lupunus

  • How to change the standard category thumbnails?

    This month I upgraded to PE6. I don't like the dark gray background and miss some of the features I got used to, but I can live with that. On the other hand, I extremely disliked the standard category thumbnails for places, people, events and other. Why on earth did Adobe change the appealing thumbnails for those categories in PE4? The present ones are dull and because I can't make anything of the fine details in the new thumbnails I keep forgetting what they stand for.
    So far I have made several attempts to revert to the old thumbnails. I replaced the *.png picture files in the shared_assets\bitmaps\tag_palette with the old picture files (which are, by the way, present in the same directory, as "legacy" files). Didn't make any difference.
    The second attempt was to add the old picture files to the shared_assets\caticons directory. They then appeared in PE6 as possible alternate choices for the thumbnails. I changed all four categories. Took some time, but it worked. However, next time I started PE6, everything was back to the original situation. Heavy sigh... Where does PE6 hide the new stupid thumbnails??

    There's something about those legacy icons that's built-in to PSE 6. Here's a recipe that worked for me:
    - Copy shared_assets\bitmaps\LegacyCatIcon_People.png to shared_assets\caticons\MyPeople.png.
    - Invoke the full editor on MyPeople.png and change one pixel to a slightly different color.
    - Save MyPeople.png.
    - Edit the People category and select the icon for MyPeople.png.
    - Restart PSE 6 Organizer.

  • How to change the standard query "Create a Master Agreement" by a custom one

    Hello Sourcing CLM experts,
    I would need to replace the standard query displayed when the user tries to create a Master Agreement by a custom query to filter the MA types according to some criteria:
    According to this post: Re: Create security profile for a document template in SAP Sourcing, I've tried to achieve it by doing the following steps:
    Create a new query as a copy of exsiting query FCI-ContractTypes
    Modify query group FCI-ContractTypesBP to include my custom query instead of the standard one to only list the MAType "Standard Master Agreement"
    Following you can see the change done into the query group FCI-ContractTypesBP:
    However, standard query has not been replaced and same set of MA Types are listed.
    Therefore, I would like to ask you:
    Is it possible to do this kind of modifications? If so, which query group need to be modified?
    If it is not possible, is there any other way to achieve that requirement?
    Thanks in advance for your time and support!
    Best regards,
    Isaac

    Hello again experts,
    If this query cannot be modified, is there any option to disable button below? Or at lease, to disable the query group to avoid the listing of MA Types when it is pressed?
    The reason is because we are going to set up the system in the way that only it will be possible to create Master Agreements from Template. However, if user keep on using that button he will be able to create MA from document types.
    Any ideas?
    Thanks again and best regards,
    Isaac

  • How to change the standard Fields short description in KNVV table

    Hi All,
    Our system is recently upgraded from 4.7 to ECC 6. When we compared both versions we found the KNVV table fields descriptions are changed in 4.7(customer modifications done in 4.7) and same these customer modifications are not copied to ECC 6 from 4.7 version.
    So I tried to change the short description at domain level with the help of access key. But the description is not changed. Can you please let me know is there any procedure that how can we change the fields description for standard tables.
    KNVV table in 4.7                                                        ECC 6
    Fields                       Short Description                     Short Description
    1. KVGR1               Gen.Bus.Terms print                Customer group 1
    2. KVGR2               VAT on FOC                            Customer group 2
    3. KVGR3               Confirmation status                 Customer group 3
    4. KVGR4               Collect Billing                           Customer group 4
    5. KVGR5               SC Surchge Excl                    Customer group 5
    Regards,
    Jyothi CH.

    You need not use access key to change field labels
    Transaction CMOD -> Go to -> Text Enhancements -> Keyword -> Change.
    Here you can change all data element KNVGR1 to KVGR5

  • How to change the standard purchase order ???

    Hi,
       i am trying to change the output form of standard purchase order.for that i copied the standard script/form to my own created script/smart form.i modified it as per user requirement and i have given the same name in NACE>EF>output type>NEU>processing routine..in place of the standard one.and i have also activated the standard program i.e. SAPFM06P.but when i am going to me22n and print preview the previous form format is coming...
    if i will create my own smartform then it is difficult for mapping all the fields to me22n...user can not input other fields in me21n if i am giving my print program name in NACE...
    can anybody please help me...????
    pls reply soon,....
    Regards
    Amayika

    Hi,
    Are you sure you have set it for medium 1 (print output) and specify the program, FORM routine, and the Form/Script correctly?
    Another reason is the output type is not set up yet at the PO. Go to ME22N and click Messages button (next to Print preview button) and check whether your output type is already there. If it is not, then create one.
    Please also check that you have copy client the form/script from development client to test client (SAPScript need this but no need for Smartform) using T-Code SCC1. And the config is configured properly in test client.
    Regards,
    Teddy

  • How to change the date time format in jsp

    Hello Sir,
    I am trying to convert the date from one format into another format.
    In SQLServer one fields type as datetime.
    when i tried to display it in jsp with String variable it shown like below,
    2006-08-16 09:11:23.0
    how to format this value as
    Wed, Aug 16, 2006 09:11 AM
    my code is
    java.text.SimpleDateFormat fmt= new java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a ");
    fmt.format(string value fetch from dtabase field);
    Plz provide me the solution asap. very urgent request.
    Regards
    venki.

    Hello Sir,
    I am trying to convert the date from one format into
    another format.
    In SQLServer one fields type as datetime.
    when i tried to display it in jsp with String
    variable it shown like below,
    2006-08-16 09:11:23.0
    how to format this value as
    Wed, Aug 16, 2006 09:11 AM
    my code is
    java.text.SimpleDateFormat fmt= new
    java.text.SimpleDateFormat("EEE, MMM d, yyyy K:mm a
    fmt.format(string value fetch from dtabase field);
    Plz provide me the solution asap. very urgent
    request.
    Regards
    venki.Have a look in to the below code
    import java.text.SimpleDateFormat;
    import java.util.Date;
    public class DateFormatTest
    public static void main( String[] cmdArgs )
    throws Exception
    SimpleDateFormat sdfInput =
    new SimpleDateFormat( "yyyy-MM-dd" );
    SimpleDateFormat sdfOutput =
    new SimpleDateFormat ( "EEE, d MMM yyyy hh:mm aaa" ); //Change the patterns in to what ever u need
    String textDate = "2001-01-04";
    Date date = sdfInput.parse( textDate );
    System.out.println( sdfOutput.format( date ) );
    i will suggest u to look in to the API doc you will come to know lot many things.

  • How to change the date/time

    Now I chang the CMLocal date/time group and apply it to Device pool for phone, but I find the date/time displayed on phone is wrong ?why?

    I have the same problem with CCM 4.1(3)SR3 and Cisco IP Phone 7970.
    Can you help me please?

Maybe you are looking for