How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

Similar Messages

  • How to I switch off / on the Status Time in the Airport Status menu

    Good Day
    I was wondering if anyone knows how to switch on / off the time that show in the Status menu of the Airport. I have a MacBook Pro with Mountain Lion that shows a connection time next to the Wifi, and this time is different to the system time which is correct.
    The time doesn't make sense as the airport was disconnected at the time. Only Ethernet was used. But now connection the WiFi to a network doesn't change this time.
    I just need to shed some light and I have tried System Preferences, going through the network, Time & Date, and various menus but I am not sure where to change this and the searches on the community seems to only bring "time" Capsule results..
    Many thanks and looking forward to to see what you have
    Waldo

    sepefrancis wrote:
    How to i change the language, is it possible?
    No, it's not possible.  You will have to acquire another copy of the book in your native language.  If you can't find it in the iBookstore, try one of the other stores that also provide free ereader apps, like Kindle, Nook, Kobo, Googlebooks, or Sony.

  • Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

    To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
    I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
    Are there any settings in about:config that will allow me to make these changes?
    EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

    This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    .urlbar-textbox-container {color: inherit !important;}
    .urlbar-textbox-container-children {opacity: 1 !important;}
    .urlbar-over-link-box {opacity: 0 !important;}
    </nowiki></pre>
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  • How to change datasource name based on the partition in configplan

    Hi
    Can any one please give me some solutions regarding how to change datasource name based on the partition in
    configplan.
    can't we do this in configuration plan?

    If you want to change template based on parameter. you have to use below syntax
    v_layout boolean
    V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
    ,template_code => 'HUBAPAPN' -- template name
    ,template_language => 'en'
    ,template_territory => '00'
    ,output_format => 'PDF');
    Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
    Thanks
    Kamalakar

  • Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi! I'd like to purchase PS and LR, when I processing the payment, I find that my Adobe ID registered under US, However, I living in HK, how to change? can't process the payment being I did not have any ZIP code

    Hi Ivanlaiwh,
    I have been doing the modification regarding your account.
    You should now be able to proceed to a new purchase.
    Thanks.
    Arnaud.

  • How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

    How I change my Apple store to the Brazilian store. It is Canadian store now but I want it to be Brazilian.

    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

  • How can I put information in the status line at the bottom of the window

    Hi, I need to put some information on the status line, like username and database name. How can I do this?
    If someone know how to do this and could show some sample code, please, put in this.
    Thank you,
    San

    Thanks, but this put a message in the message line, and I need to put this in the status line below the message line, where are displayed messages like "enter query", "execute query", "list of values" and etc...
    Is this possible?
    Thanks

  • When I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other".  What is that about and how can I free up that space?

    when I view the summary of content on my iphone5, the status bar at the bottom to the iTunes window shows I have 3.90 Gb's of "other".  What is that about and how can I free up that space? 

    I simply restored my iPhone from most recent  iCloud  backup.  Poof. Good to go!!!

  • Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

    Hey briannagrace96,
    Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/ts1363
    You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
    Try the iPod troubleshooting assistant:
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
    If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
    Restart the iPod Service
    Restart the Apple Mobile Device Service
    Empty your Temp directory and restart
    Verify that the Apple Mobile Device USB Driver is installed
    Change your iPod's drive letter
    Remove and reinstall iTunes
    Disable conflicting System Services and Startup Items
    Update, Reconfigure, Disable, or Remove Security Software
    Deleting damaged or incorrect registry keys
    Take care,
    David

  • HT1386 When I try to sync my iphone with itunes, it tells me in a warning that I don't have enough memory and yet the status bar on the bottom says I do and I know that I have enough memory.What's as

    When I try to sync my iphone with itunes, it tells me a warning that I don't have enough memory and yet the status bar at the bottom says that I do and I know that I have enough memory. What's the problem? It happens with the ipods and ipad as well!!!

    The new iTunes has a somewhat different look from the previous version.  You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes.  Or you can adapt to the new look.

  • I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

    I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

    something other is dowloading somewhere on ipad

  • Usage decision thru QA11 for forcibly give the UD code on a inspection lot

    All,
    I am trying to do an usage decision through QA11.Where in Batch for respective Inspection Lot we have to find the PD,SLED and NID there .
    when i forcibly give the UD code  on a inspection lot  and save this it will calculate the NEXT inspection Date.But some times the NID value is greater than SLED value after the UD.
    My requirment if NID is greater than SLED after UD then give a waring message.
    Any suggestions would be appreciated.
    Regards,
    Sanjit

    Hi Sanjit,
    You can just try the BAPI: BAPI_INSPLOT_SETUSAGEDECISION
    for more help, check the following helpful link:
    Re: Stock posting through mb1b
    Hope this will help you.

  • How to change massively in some folders the permissions owner ?

    Hi:
    We have some folders in SAP Portals 2004s (7.0) with a user which is the ACL permission owner and the Services permission owner of these folders.
    We need to change that owner massively in these folders to a group without using the user of that owner.
    How can we do that ?
    Thanks in advance,
    Felipe Mendivil Ortiz

    Hi Felipe,
    it seems that you have missed one thing (in terms of understanding).
    The System Principal is a special permission. It is like defining a super admin user who is able to do a lot of administrative things in the Knowledge Management platform. This special permission can be applied to every existing portal user (independent of the other permissions the user has) but also to a group or a role. All users assigned in that group or with that role will become a system principal and have the defined permissions.
    As you've mentioned above, when you create a new system principal definition you can type the following:
    1) Name - To be on the safe side I would use here the same UserId/RoleID/GroupID as in the User Name /Role Name /Group Name field.
    2) Change Resource Permissions - If you check this box, as mentioned in SAP Help, the defined user/role/group is able to change resource permission for every resource (document or folder).
    3) Service ACLs - Yes, here you define if the user/role/group should also be able to change service permissions for every resource (document or folder), or not.
    4) Set System Properties - This is for properties that are not set over the UI (Details screen) but can only be set via API. Sometimes you want to have a system user, which you define as system principal and give him this permission to user this user to set system properties.
    5) Unlock Permission - As mentioned in the SAP Help link, with this permission a system principal could remove document locks set by other users.
    6) Resource Permissions - Here you define what the system principal (user/group/role) is allowed to do in KM (besides the above defined status of changing permissions). If you selected only READ, the system principal will only be able to read ALL resources (files/folders) in KM. It should be clear what happens if you define READ, WRITE, DELETE.
    7) User Name - Type here the User ID of the user(s) that you want to give this system principal status. You can have here a comma separated list.
    8) Audit Actions - By checking this box, every time the mentioned user changes permission / unlocks objects / etc. this action will logged. You will be able to see it in the [KM audit|http://help.sap.com/saphelp_nw04/helpdata/en/44/a9b4e2f9677455e10000000a11466f/frameset.htm].
    You will not find a initial path definition, because you can not restrict a system principal on a special path. The system principal is defined global for ALL KM repositories.
    Hope this clarifies all your questions,
    Robert

  • How can I monitor Status word From the other side of the GPIB bus

    I develop Thermal system control that should be operate thru the GPIB IEE 488.2 bus , my instrument application already written in Visual Basic ,The system knowes to do basic operation such as SETPOINT ,AIRDUT , BEGIN , STOP and more but I have do a problem , any time that I capture command from the controller the status word stuck at listener mode and I can not send another command again because my loop is waiting for the other side (the controller ) to tallk by monitor the IBSTA word .
    There is anyway to reset ,clear ,initialize STATUS word again to his default value ?
    Note : I am using VB 6 , the Samples that you have here for Non-controller is good so far if I want to send and recive data manualy (c
    omputer to computer)
    What if I have A system that work and always waiting for capture command and do somthing ?
    I will be very greatful if anyone can help me , send me sample code for Status checking loop.
    MIKI-AVI

    Hello Miki-Avi,
    I'm having a little bit of trouble understanding what you're trying to do. It seems that you have an instrument application that you have written and works in some instances but gets into an infinite loop in other cases. I think that your loop is waiting for something in the Status byte to change, and you're wondering how you can get it to change.
    I'm not sure what bit you're waiting for, but I would assume that it is the LACS bit 2. You do not want to simply reset the IBSTA byte because this byte tells you what is happening on the GPIB interface. So, if you're waiting for the LACS bit to change, then you are waiting for the board to be addressed as a listener. Your controller would address the non-controller as a listener once you sent it da
    ta with an IBDEV and an IBWRT call.
    If you are looking for code for a status checking loop, check the following resources. Remember that you must call ibwait 0 to update your IBSTA byte. The 488.2 Function Reference is very useful in figuring out what you need to do.
    http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3EF8D56A4E034080020E74861&p_node=DZ52353&p_submitted=N&p_rank=&p_answer=&p_source=Internal
    http://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/9cc0939663f1c5de862565d70082e89e?OpenDocument
    Please let me know if you need more assistance.
    Scott B.
    National Instruments
    Applications Engineer

  • How to change Default Web Templete in the BI System

    Hi Experts,
      Currently user access queries using WEB BEx Analyzer and the templete is 0Analyzer.
       When we develop a query in Query Designer will publish the query in the relevant roles and user can access that query through  WEB BEx Analyzer and the templete is 0Analyzer --Open Query option.
      Now we want to change the Default templete from 0Analyzer to 0Analysis_Pattern
    Could you please update me on how/where to
    1) First check what is the default templete defined in the system and
    2) How to change the default templete from  0Analyzer to 0Analysis_Pattern.
    Thanks

    Hi,
    I am using BI 7.0
    When i go to RSCUSTV27
    'Change View  "Set Standard Web templetes"
    Customizing ID : Business Information Warehouse
    Set Standard Web Templetes
    Broadcasting
    Query precalcilation
    Report Precalculation
    Enterp report
    Ad Hoc Analysis
    Every thing is Blank
    But currently we are using 0ANALYZER web templete
    Please update
    Thanks

Maybe you are looking for

  • Follow-up: beasys.User vs. theory.Customer

    Hi, In one of the previous postings there was mentioned that Personalization server and Commerce Server do have user management functionality overlap. Indeed it would have been nice to have a single point of user info persistence and management. The

  • Copying of data to combobox from clipboard

    How to copy data to a clipboard and paste it in a combobox, so that the combobox needs to match the copied data with the data it has.

  • Text appears slower than typing

    Hello, not sure how to describe this so an initial search did not yield any answers. For a couple of days now whenever I type in a document the letters appear slowly, and not almost immediately as they usually do. There seems to be a time lag between

  • Do I need Adobe Professional to use Adobe LiveCycle?

    I need Adobe LiveCycle Designer for form development. Do I need to purchase both Adobe Acrobat Professional and Adobe LiveCycle Designer ES4? In the past LiveCycle was part of Acrobat Pro. They are seperate now.

  • Runtime error! - contact application support team for info

    m using hp pavillon dv6 for last 2 years never before encounter such problem .. 1st i cannot access n e of files it say access denied though m the adminstrator and only user, so i decided to restore it to factory default setting but cant do it, in sy