How to change the status profile of equipment?
Hi Experts,
Is it possible to change the user status profile for already created equipment? I tried to change the assignment of status profile to equipment category and found it works only for new equipments. It is not applicable to already created equipments. The status of the status profile is already used in equipments.
Please suggest and do the neeful.
Thanks and best regards,
Praveen.
No you can not change status profile assigned with already created equipment.
Eg. You assigned status profile 00000003 to equipment category M of equipment. so whnever any new equipment created will get status profile 00000003 only.
For your case, dont make any change status profile no .00000003--> make whatever changes you have to made about status naming,sequence keeping same status profile.
After that goto equipment change master edit>change category>selet same category for assignment. so equipment will get same status profile with status changed.
Hope this will help you.
Similar Messages
-
How to change a status profile from existing in CRM 7.0?
Hi,
This is the scenario for which I need to change the existing status profile :
We are using categories such as Maintenance , Approvals etc.
There is a huge list of options which comes when we choose the category. We have assigned a status profile to each of these categories.
So for e,g when I choose Maintenance, it also displays other options not related to Maintenance.
Q 1) how to I change the status profile on this??
I tried using CRM_STATUS_PROFILE_CHANGE but it doesnot work
CALL FUNCTION 'CRM_STATUS_PROFILE_CHANGE'
EXPORTING
OBJNR = iv_guid
STSMA = 'ZV001'
XNOAUTO =
X_NOACTIVITY = ' '
EXCEPTIONS
OBJECT_NOT_FOUND = 1
NO_STSMA_CHANGE_POSSIBLE = 2
STSMA_NOT_FOUND = 3
ERROR_OCCURRED = 4
OTHERS = 5
Q 2) If the above is not the right way is there a possibilty to hide the statuses ??
Thanks and Regards,
NarayaniHi,
I am not so clear about your requirement, would you please try to make it clearer.
Which transactions are you assigning the status profile to?
And what is the "categories" do you mean? As I could guess it is the item within the status profile, isn't it?
For example you have a status profile defined as
10 xx01
20 xx02
30 Maintenance
40 xx03
50 Approvals
60 xx04
Is it like the above? Or else, please clarify.
Thanks,
Hongyan -
How to assign the status profile to that particular user..?*
Hello Everyone..
I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
Now My problem is ,How to assign the status profile to that particular user..?
so that only the user is allowed to change the order.
ThanksHi,
Maintain authorization key (authorization code) in status profile.
We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
We assign T.codes to role and assign role to user.
Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
Click on authorization data .
Expand the Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
Click on Authorization key button, assign Authorization key.
Click on status profile. assign status profile.
Regards,
Chandra -
Changing the Status profile in QM
Hi,
The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
This has set the User Status as IMAT: Material is not correct.
Due to this, unable to do any of the further processing.
In QA02, the Status Profile cannot be changed/deleted.
So how to remove the Status Profile from the Quality Inspection Lot?
Request your help.
Regards,
Sankar.NHi
An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
Leon.
Regards. -
How to change the status of a production order
Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun SiddharthDear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar -
How to change the Status CRTD of the Inspection Lot?
Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
YodaHi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit -
How to change the status in the table kssk
Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat. -
How to change the status of Serial number
Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
SriHi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar -
How to change the status of updated record?
Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari -
How to change the status of IDOCS from 29 status to 53
Guys
how to change the status of IDOCS from 29 status to 53
Thanks in advanceHi Krishna
IDOC_STATUS_CONVERT Use this FM and reward me -
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA
HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBAThanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
L_STATUS TYPE SWR_WISTAT-STATUS,
L_NEW_STATUS TYPE SWR_WISTAT,
L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
RECEIVING
RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
EXPORTING
WORKITEM_ID = LCL_L_WID
STATUS = L_STATUS
USER = SY-UNAME
LANGUAGE = SY-LANGU
DO_COMMIT = 'X'
IMPORTING
NEW_STATUS = L_NEW_STATUS
RETURN_CODE = SY-SUBRC
TABLES
MESSAGE_LINES = L_SWR_MESSAG
MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa -
Change the status profile assigned to the line item from PROFA TO PROFB
Hi Experts,
The issue we are having relates more to the fact that the code we have written is changing the item category, however the status profile has already been retrieved from configuration based on the original item category and therefore the status selection that we are getting is incorrect.
Item Category A -> Status Profile PROFA
Item Category B -> Status Profile PROFB
For example we have a line item and item category A is determined through config, this then retrieves its associated status profile PROFA. However we have then coded the system to change item category A to item category B. However the status profile still remains PROFA.
We need to find a way to change the status profile assigned to the line item from PROFA to PROFB.
any quick inputs from any one please......
Thanks in advance
hemanthHi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR -
User exit in VA01 for changing the status profile
Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
SantoshHi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
OBJNR = XVBAK-OBJNR
STSMA = G_STATUS
NO_CHECK =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
NO_STSMA_CHANGE_POSSIBLE = 2
STSMA_NOT_FOUND = 3
OTHERS = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u. -
How to change the status of an incident, after it is "Confirmed"
Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank youhi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi -
How to change the status value?
Hi Experts
We landed in the starnge situation. We defined a multi task EE Monitor activity to change the status attribute to past due when particular internal event code is overdue. We forgot to assign the correct EE monitor Activity to EE Profile and the report /SAPTRX/EE_MONITOR converted the internal event code to overdue but did not change the status to past due for lakhs of records.
Now we assigned the correct EE Monitor activity to the EE profile. How do we change the status to past due for already processed records? Is there any standard program available for this purpose or shall we need to write any custom program for it?
Your quick response is much appreciated.
Thanks
RaviHi Ravi,
the coding in the EE Mon activity SET_STATUS can be used as template. The method is unfortunately protected.
It depends if you use EE History (Setting in EH Type Customizing). If yes it is importatnt to update also EE History table and the counter in the EH header for the History.
Maybe the easiest way would be to send with a report messages to the EH and do the update in the rule set with the standard activity.
You could use a new event code and react on it in the rule set.
Best regards,
Steffen
Maybe you are looking for
-
My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.
-
Can I do the following with sharing.
Hi everyone. I'm a new switcher and i've bought 2 macbook pro's. I'm thinking of buying a mac mini to through over by the TV... One of the things we are looking into is can we use the mini as a main photo depot. I've played around with the sharing ab
-
Icloud does not work on the pc
took photo but does not come to pc. went through setup, outlook went through a backup then showed some old reminders. not sure where those came from. but still no photos
-
Passing value to internal parameter of subreport
I have a report which contains a subreport. That subreport has 2 regular parameters and 1 internal parameter (which has default value). From what I've read ( http://msdn.microsoft.com/en-us/library/aa337490(v=sql.90).aspx ) I understand that there's
-
Hello, I have written this rec statement *WHEN REC(EXPRESSION=%VALUE%LOOKUP) *ENDWHEN the only thing is I need to multiply it by -1. How do I add the reverse sign of this result to the REC statement. or how do i add that in the statement? Thanks.