How to change the storage location while create delivery?

Hi all:
I have to question to trouble you,when I create a delivery with reference to a sales order,however every time it set storage location 'FG10' to the delivery automatically.I can modify it, but how to modify this default value?the sales order haven't information about storage location.
thanks.
Best regards
lance

Hi Lance
Please try this:
In SPRO, go to Logistics Execution - Shipping - Picking- Determine Picking location - assign picking locations
here, for the reqmt plant and shipping point and storage conditions, define the applicable storage location. If you are not assigning any storage conditions in you material master, you may leave it blank. Storage conditions can be defined in the Material master in General Plant Data / Storage view.
After maintaining this, try creating a delivery and see if the delivery gets created in the required storage location.
Please reward points if this helps you
Rgds
Nageshwar

Similar Messages

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.

Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
   Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
    lw_item_data-deliv_numb           = lw_lips-vbeln.
    lw_item_data-deliv_item             = lw_lips-posnr.
    lw_item_data-material                = lw_lips-matnr.
    lw_item_data-fact_unit_nom      = lw_lips-umvkz.
    lw_item_data-fact_unit_denom = lw_lips-umvkn.
    lw_item_data-base_uom            = lw_lips-meins.
    lw_item_data-sales_unit            = lw_lips-vrkme.
    lw_item_control-deliv_numb      = lw_lips-vbeln.
    lw_item_control-deliv_item        = lw_lips-posnr.
    lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
    lw_item_data_spl-deliv_item     = lw_lips-posnr.
    lw_item_data_spl-pick_denial   = 'X'.
    lw_item_data_spl-stge_loc       = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_lgort     TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
    APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data       = lw_header_data
      header_control   = lw_header_control
      delivery               = v_delivery_no
      techn_control     = lw_header_tech_control
    TABLES
      item_data           = li_item_data
      item_control       = li_item_control
      return                 = li_return_change
      item_data_spl    = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
    CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
    READ TABLE li_lips INTO lw_lips
    WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
    IF sy-subrc EQ 0.
Passing the delivery details into Item level table
      lw_item_data-deliv_numb              = lw_lips-vbeln.
      lw_item_data-deliv_item                = lw_lips-posnr.
      lw_item_data-material                   = lw_lips-matnr.
      lw_item_data-batch                       = w_lqua-charg.
      lw_item_data-dlv_qty                    = w_lqua-verme.
      lw_item_data-dlv_qty_imunit         = w_lqua-verme.
      lw_item_data-base_uom               = w_lqua-meins.
      lw_item_data-hieraritem                = lw_lips-posnr.
      lw_item_data-usehieritm                = 1.
      lw_item_data-fact_unit_nom          = lw_lips-umvkz.
      lw_item_data-fact_unit_denom      = lw_lips-umvkn.
      lw_item_data-sales_unit                 = lw_lips-vrkme.
      lw_item_control-deliv_numb           = lw_lips-vbeln.
      lw_item_control-deliv_item             = lw_lips-posnr.
      lw_item_control-chg_delqty           = 'X'.
      lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
      lw_item_data_spl-deliv_item          = lw_lips-posnr.
      lw_item_data_spl-stge_loc            = w_lqua-lgort.
      lw_item_data_spl-pick_denial        = 'X'
Appending work area into internal table to pass as parameter
      APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
      APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
      APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
      CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                    lw_vbpok, lw_lips.
    ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data           = lw_header_data
      header_control       = lw_header_control
      delivery                   = v_delivery_no
      techn_control         = lw_header_tech_control
    TABLES
      item_data                = li_item_data
      item_control            = li_item_control
      return                     = li_return_change
      item_data_spl         = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to change the ORACLE_HOME location in listener

Hi,
I have 2 instances under one oracle_home.
I am planning to install new oracle home in another location and move one instance to that new oracle home.
My doubt is, how to change the listner.ora such that one of the instances should point to new oracle home.
1) Do I need to copy the listener.ora from old oracle home to new home and put only the new instance details in that?
I am not understanding how to deal with listener.ora without disturbing the old instance listener.
Thanks,
Mahi

if we bounce the listener the connections to other might be lost.NO!
The listener contacts the DB to establish the initial connection between client & DB.
After the connection between DB & client has started, the listener has NO involvement between DB & client.
Stopping the listener has NO impact on existing sessions.
Edited by: sb92075 on Jul 28, 2009 4:37 PM

How to change the library location because i don't have enough memory in my internal hard disk

can i change the library location because i don't have enough memory in my internal hard disk

Hi ahmedmagdyelrasheedy,
It is not clear what library you are trying to move, but if you are running out of space on your internal hard drive the most likely culprits are your iTunes music and your iPhoto library. Either of these can be moved to an external hard drive making room on the internal.
For the iPhoto library see this article -
iPhoto: How to move the Library folder to a new location
To move the iTunes music see this article -
iTunes for Mac: Moving your iTunes Media folder
Thanks for using Apple Support Communities.
Best,
Brett L

How to validate the storage location in me21n?

Hi,
I am having the requirement to validate the storage location in me21n transaction
whether the entered material is belongs to that storage location or not.
is there any exit to this requirement?
Helpful information is rewarded.
Regards,
Riaz.

Hello Riaz,
The BADI <b>ME_PROCESS_PO_CUST</b> would be very useful here. If you want to trigger your validation message after user entered the data then use method <b>PROCESS_ITEM</b>.
I hope this helps.
Best regards,

How to change the CACHE location to a different drive

My Bridge's cache is located on my C drive, which is almost full. I would like to change the cache location to drive D, which is also an internal drive, but with lots of available space. Unfortunately, when I go to Preferences and click the "Choose" button for the cache location, it only shows me my C drive. I am 99% sure I originally installed all of the creative cloud on my C drive, but then uninstalled it and reinstalled it on my D drive(because of space reasons). It appears as if the application resides on the D drive, but all the app data remains on the C drive.
Is there anyway to access the D drive for the cache?
Is there anyway to move the app data files to my D drive?
Thanks,
Paul

Hi Ronald,
Thanks for your response. Here is what I see when I click the button to choose a cache location:
I have explored the file structure and can't see anything outside of these folders, which are on the C drive.

How to change the default location of 'Music', 'Pictures' in my home folder

IMAGINE I have 2 hard disk partitions on the SAME hard disk,
one is called 'Macintosh HD' and the other is called 'My Data'.
The Plan:
In the 'Macintosh HD', there are (1) system files & (2) users' settings.
In the 'My Data', there are all the music, pictures, etc.
For example, the 'Macintosh HD' has 40GB and the 'My Data' has 120GB.
All I want to do is to *separate the SYSTEM and my DATA* _without migrating my home folder_ inside 'Macintosh HD' which contains folders called 'Music', 'Pictures'... to the partition 'My Data'.
_+*I want to separate the system files and my data incase I need to reinstall the Mac OS X while leaving all my data untouched.*+_
So the way I should do (I guess) is to leave my home folder inside 'Macintosh HD' empty,
and create files called, for example, 'My Music', 'My Pictures', etc. in the 'My Data' partition.
Then _redirect the files 'Music', 'Pictures', etc. in my home folder inside 'Macintosh HD'_ to _'My Music', 'My Pictures', etc. in the 'My Data' partition_.
In Windows XP or Windows 7, you can redirect those as using the methods below:
(1) http://i41.tinypic.com/2rorkhx.jpg
(2) http://www.sevenforums.com/tutorials/18629-user-folders-change-default-location. html
But I just don't know how to do that in Mac OS X, it seems that Mac OS X doesn't even provide a way for users to do so:
http://forums.macrumors.com/showthread.php?t=336192
I saw a reply in macrumors forum and tried to move the 'Music', 'Pictures', etc. folders,
but it turned out that those files were being copied, not moved.
So I can't move the 'Music', 'Pictures', etc. to the partition 'My Data' and make aliases of them which can be put in my home folder inside 'Macintosh HD'.
So, are there only 3 options for me too choose?
(1) stop trying to fight Apple and Mac OS X on where it puts things, just put all the things in my home folder inside 'Macintosh HD', using only 1 partition
(2) move my home folder to the other disk partition, in this case, the partition 'My Data'
(3) can't redirect the location of Music', 'Pictures', etc. folders in my home folder in the 'Macintosh HD', but just simply put things in the 'My Data'.
Thanks in advance!
Message was edited by: MicBook

Here's the easy solution:
1. Copy the folders you want on the My Data partition.
2. Verify all files copied OK, then delete the same folders on Macintosh HD.
3. Make an alias for each of the folders you have moved.
4. Copy the aliases to your Macintosh HD/Users/Home folder.
5. Delete the space and "alias" from each of the aliases so the have the exact same names as the originals.
DO NOT do this with the /Home/Library/ folder as the above will not work with that folder.
When you attempt to delete the folders you have moved the OS will complain that it cannot delete them because they are needed by OS X. This is normal. In order to delete the original folders and rename the aliases you will need to boot the computer from another drive or from the OS X installer disc. But for the latter you will need to run the Terminal (from the installer's Utilities menu) and use Unix commands to delete the folders and rename the aliases. If you know how to use the Terminal then the entire operation can be done from the command line. See the following:
1. Boot the computer into single-user mode.
2. At the prompt enter:
/sbin/mount -uw /
cd /Users/yourusername
mv /Documents "/Volumes/My Data/rest of path/Documents"
Repeat the above line replacing "Documents" with the names of the other folders you are moving. The "mv" command actually moves the folders rather than copying them.
ln -s "/Volumes/My Data/rest of path/Documents" /Users/Documents
Repeat this line for the other folders replacing "Documents" with the names of the other folders.
You may find printing out the command line routine using a large mono-spaced font useful in assuring you spot the spaces in each command line. Note that the quotes used in the command lines above are required.
Enter "reboot" without quotes to restart the computer.
Message was edited by: Kappy

How to change the Network Location without admin right?

How to allow an normal user to change their network location without adminstrator rights? Thanks

You can't, unless you change your user rights to Admin. Now, you can reset all the passwords and admin through a reset process, but if this is a corporate owned Mac, you could get in trouble. Even fired. If it's your parent's Mac, then just get them to give you admin rights.

How to change the Variant Particulars already created for FBCJ.

Hi
All Experts ,
I want to change & edit some particulars for already created variant in FBCJ ( Cash Journal ).
So how can change them & form where ?
Your help is highly appreciated.
Thanks in advance !
Regards,
Pankaj.

Hi,
Ravi,
When I went to status option I found these fields :-
Transaction          FBCJ
Program (screen)    SAPMFCJ0
Screen number        100
Program (subscreen) SAPMFCJ0
Screen number        110
Program (GUI)       SAPMFCJ0
GUI status           CJ0100
Which programme to select ?
Please explain.
Thanks in advance !
Regards,
Pankaj.
Edited by: pankaj_ab on Jun 1, 2009 11:31 AM

How to fill the configuration data while creating a sales order

Hi,
   I am creating Sales order through BAPI_SALESORDER_CREATEFROMDAT2, the order is getting created but I am not getting the characteristic values. I filled the structures required for the configuration part.
If possible please post the code for the config part.
Thanks,
Sarath.

Hi,
Here for your reference:
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
        salesdocumentin     = w_line-vbeln
        order_header_in     = order_header_in
      IMPORTING
        salesdocument       = salesdocument
      TABLES
        return              = return
        order_items_in      = order_items_in
        order_partners      = order_partners
        order_schedules_in = schedules_in
        order_conditions_in = conditions_in
        order_text          = order_text.
Rgds,
Jenny

How to change the Schema Location ??

Hi ,
I need to change the Schema name which is registered through the Deployment Manager . OWB allows all other Parameters to change except the Schema name . Any workaround ???

On your mapping right click and choose the option configure (window Configuration Properties), open the tab "Sources and Targets" on this tab choose the table that you want to change the schema and on the label Schema insert the schema to be used.
hope it helps!
Regards,
Vitor

How to change the structure of a created Proxy?

Hi, everyone
I have a scenario as follow:
I have to change the importing sturcture of proxy, but the system warning that 'Use transaction SPROXY if you wish to process a generated proxy type'. But, as a matter of fact, I handle it in the transaction SPROXY. What's wrong with it?
Regard.
Best wishes!
Edited by: MikoSuzuHikari Miko on Dec 23, 2008 11:16 AM
Sorry, here, structure means the component type refered

Hi,
Please check the following link will help you out.
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/content.htm

How to change the storage location while create delivery?

Similar Messages

Maybe you are looking for