How to change the Success Message for Personal Data Screen in ESS

Hi,
While saving the Personal Data in the ESS I want to chage the Success message.When I check the DC , Message Class i am not able to find the the particular string.Can any one please guide how to find the Success Message String for this Personal Data Screen or Which BAPI I have to check .
Regards
Alexi

Hi iidhya ,
Please find the code below
    public boolean onEvent( )
    //@@begin onEvent()
    String event = fpm.getEventData().getEventName();
          if (event.equals(IFPM.EVENT_ADD)){
               wdThis.wdGetFcPersInfoInterface().setModeForCreate(selectedSubtype);
          }else if(event.equals(IFPM.EVENT_EDIT)){
               wdThis.wdGetFcPersInfoInterface().setModeForEdit(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          }else if(event.equals(IFPM.EVENT_REMOVE)){
               wdThis.wdGetFcPersInfoInterface().setModeForDelete(wdThis.wdGetFcPersInfoInterface().getSubtypevalue(selectedRecord));
          return true;
    //@@end
Regards
Alexi

Similar Messages

How to change the package name for a msg class

Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

How to change the menu text for menu exit in Version 3.1i

Hi,
I am working on an enhancment in CJ02 transaction in 3.1i version. I have implimented menu exit for it , but I am unable to change the menu text for it.Please let me know how to change the menu text for that menu.
Thanks
Suman

Hi Shree,
Thanks for the response. Please find the Enhancement name here "CNEX0006".
Thanks
Suman

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.
<b>
How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

How to change the account setting for App Store

My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
Thanks,

once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
it will look like it is doing nothing but give it time and it will sign you in with the new username.
is it possible you have multiple itunes accounts?
when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
be well

How to change the browser used for Google search from context menu of selected text?

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

PURCHASING-How to change the next approver for the Purchase Requistion(PR)-

Hi All,
Could you please let me know how to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization. how can i acheive this? can you please let me know the process ?
Thanks,

Hi,
You have not mentioned the version you are using (11i or R12).. Are you using iProcurement... ? Are you using positional or Employee-Supervisor hierarchy..?
Your question : How to change the next approver for the Purchase Requistion(PR) from User "X" to "Y", as Y was manager of "X" and 'X' left the organization.
Ans: You can achieve this through below workarounds
- Through *"Mass Update of Requisitions" functionality* (Conc. request) you can update the Approver name from User "X" to "Y" for existing PRs.
- Replacing the Supervisor name of the requestor/requisitioner in the HR record (assignment) from User "X" to "Y"..
Hope it helps.
Kind Regards,
S.P DASH

How to change the "home" computer for a iPod touch 3G (iOS 4.2.1) and an iPad 2(iOS5)? Music library has been already moved to iTunes on the new computer.

I have a iPod Touch (3rd gen) that has not upgraded it's OS beyond iOS4.2.1 even if I have tried connecting it into iTiunes I have a iPad2 which has been recently upgraded to iOS5 . Both were connected to a laptop computer that my husband will take with him when he moves to a different city. I will most probably buy a second laptop sometime, but meanwhile I want to tether my iPod touch and iPad 2 to my desktop PC for now. Before I took the plunge, I had a few questions which I am hoping this forum will help me answer
1. How to switch the Home PC for these devices? I have already transfered my Music library on to my Home PC and then downloaded and reorganised with iTunes. Since I am reorganising the library anyway I don't minding removing all my music from the iTouch and set it up from scratch for the music. However, I removed all musci from theiTouch, changed it to manual mode and connected it to the desktop- It's detecting it fine- but it still is not the home computer for the iTouch- everytime I try to put new music in it- it is deleting everything old- I can't see the same controls as I see from the laptop at all- how to rectify this? To I need to set this up as a new iPod (restore route)?
on the touch I have very few apps and don't care about them. on the iPad I do have a couple of valuable apps that I want to hold on to- so have n't tinkered with it at all- what is the smoothest way for thsi transition? The iPad doesn't have any music on it at this time, but what to do if I want to transfer some?
2. Is there a way I can store the organised iTunes info in any way- like I said I might buy a new laptop in a few months but do not want to reorganise my iTunes over agaoin- it' a fairly large collection most of which is n't purchased from the iTunes store.
3. Why sin't my iTouch 3G upgrading- it's stuck on iOS4.2.1 but iTunes doesn't show any updates- even with chck updates button iTunes show that it is a current version.
thanks for reading through and any help that I can get to sort this mess out.

The recent release of iBooks 1.2.1 has corrected the problem of the missing Dutton edition of Winnie-the-Pooh. It may have been there with the previous install of iBooks but it would never display in the bookshelf. After updating iBooks to 1.2.1, the Dutton version (the one included with iBooks) suddenly appeared on the bookshelf. So it was a software glitch after all and not a fix Apple chose to document explicitly in the update.
Message was edited by: Rick Lang

How to chang the idoc message type

Hi,
I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
Regards,
Somenath

Hi,
This may help u
Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Regards
Seshagiri

How to Change the Alias name for Internet user in SU01 tr code through cod?

Hi Guys,
             My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
            Is there any FM for tha changing Alias Name?
Thanks,
Gopi.

Hello Gopi Anne ,
                             You can use the following FM / BAPI :
BAPI_USER_CHANGE
MY_BAPI_USER_CHANGE
For BAPI_USER_CHANGE :
You need to make use of the IMPORT parameter :
ALIAS     TYPE     BAPIALIAS                               User Name Alias
ALIASX     LIKE     BAPIALIASX                               User alias change flag
Thanks,
Greetson

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

How you change the download frequency for a single Podcast?

I have iTunes 11.1.5 for Mac, and I can't find how to change the down load frequence , aka "check for new episodes" setting for individual podcasts. I've tried using the settings menu in the "My Podcasts" and the "List" podcast view. When I do this, I see these setting:
Keep
Download
Sort Order
Play Order
If I click on the "Defaults..." button, the top setting is "check for new episodes"
I have no problem with being able to change the default download frequency setting, but I am at wit's end with locating where I can change that setting for individual podcasts.

Bump.

How to change the default langauge for logon-Urgent

Hi All,
I need to set the default language for the web-UI login (say english). Could you please help me how can I do it?
My scenario is:
Lets say if the end user is launching Web-UI from Germany (His browser default langauage will have German most of the time), Web-UI is picking German as default language while my client wants to show everything in English to everyone despite of any langauge in the browser.
I have already set logon language to english in SU01/ in the service login data via SICF but still Web-UI is picking langauge from the browser, while If I am launching web-UI from my favourite list (in which i have set two paramater sy-langu = 'E' and sap-langauge = 'EN') then web-UI is not picking langaue from the browser.
But in the ideal scenario user will launch Web-UI from the portal (Which can have diffrent diffrent application coming from diffrent-diffrent system and I want to change the language only for web-UI application which is coming from CRM) not from the favourite list.
Kindly provide me your input.
Thanks and regards,
Sandeep

hi,
Please check the link.
http://help.sap.com/saphelp_crm60/helpdata/en/43/26ad4c34b30b18e10000000a1553f6/frameset.htm
Regards
Srinu

How to change the Success Message for Personal Data Screen in ESS

Similar Messages

Maybe you are looking for