How to change the SystemID (system name) of the HP StoreOnce Virtual Storage Appliance (VSA)

I can't seem to find a darned way to post a question regarding the HP StoreOnce Virtual Storage Appliance.  I want to change the name (SystemID) of a StoreOnce VSA that has already been deployed.  The web interface has NO way of changing any value.
The command line interface (through ssh) doesn't seem to have any way to change the SystemID value in any way.  I want to change this value so that when I have it join the Active Directory domain it is a meaningful name, and NOT the serial number of the VSA.
I KNOW that I am asking in the wrong place, but I don't know what the proper place is to ask this question. 
Unless you have either of the below keep your comments to yourself:
1) a real suggestion on where to post this
2) an answer to my question

Bill, welcome to the forum.
I believe you will receive the help that you need if you start a thread here.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • How to change the parameters in virtual MOSFETs

    I have been using Multisim for quite a while. I find that in Multsim 8 & 9, I can't change the model parameters in Virtual MOSFETS,  like VTO,
    KP,GAMMA,  PHI and  LAMBDA, etc. I could do this in Multisim 7, is there an explanation for that? or is there something hidden there?
    Thanks in advance for your attention.

    In Multisim 8 and Multisim 9 the Virtual MOSFET dialog box was actually simplified and that is the reason why the "Edit Model" button you are used to is no longer there. The dialog box is such that it mimics the information available on a data-sheet and therefore setting up the physical characteristics of the device is done quite quickly. This in-turn generates the simulation model for the virtual device. With the Edit Model button you are accomplishing a similar task, however you did so by playing around with SPICE parameters which is less intuitive.
    For now, if you wish to control the properties of a device wholly, I would recommend that you take a pre-existing real MOSFET model and then edit its parameters with the appropriate SPICE parameter values (such as GAMMA, LAMBDA etc...)
    I hope this helps.

  • How to change the sender name "workflow system" to Diff name

    Hi ,,
      How to change the mail sender name that is "workflow system" to different name. Whenever the mail is triggered it shows the sender name as "workflow system" . i want to change the name of the sender..Even i changed the name of the WF-Batch(name) user but no use.. Pls advice.
    regards,
    Roops.

    Hi Roops,
    Check if the following [link1|Re: How to change text of wf batch??] [link2|Update should not happen in the name of WF-BATCH] helps you.
    Regards,
    Saumya

  • Has anybody found out how to change the workgroup name in 10.5?

    I have been trying to connect to XP machine shared folders and it is not working.
    I've tried using smb and it gives connection error or says Ithe user has not permission in the machine
    I've started in 10.4 from backup disk and it is working OK.
    I see that in 10.4 it asked for DOMAIN/ Workgroup name , and this option has disappeared in 10.5
    Has anybody found out how to change the workgroup name in 10.5?

    System Preferences - Networking

  • How to change the public display name?

    How to change the public display name since the last person left the job and I am not new person take it.

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    MSDN and TechNet Profile and Recognition System forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to change the default password file's name and path when the database created?

    how to change the default password file's name and path when the database created?
    null

    Usage: orapwd file=<fname> password=<password> entries=<users>
    where
    file - name of password file (mand),
    password - password for SYS and INTERNAL (mand),
    entries - maximum number of distinct DBA and OPERs (opt),
    There are no spaces around the equal-to (=) character.

  • How to Change the Alias name for Internet user in SU01 tr code through cod?

    Hi Guys,
                 My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
                Is there any FM for tha changing Alias Name?
    Thanks,
    Gopi.

    Hello Gopi Anne ,
                                 You can use the following FM / BAPI :
    BAPI_USER_CHANGE
    MY_BAPI_USER_CHANGE
    For BAPI_USER_CHANGE :
    You need to make use of the IMPORT parameter :
    ALIAS     TYPE     BAPIALIAS                               User Name Alias
    ALIASX     LIKE     BAPIALIASX                               User alias change flag
    Thanks,
    Greetson

  • How to change the folder name in the web report.

    hi experts,
    can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
    waiting for ur favourable response.
    thanks
    suri

    Hi Tony,
    Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
    thanks
    surendra

  • HT4356 I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office?

    I have two printers on my network.  Does anyone know how to change the printer nomenclature - Officejet Pro 8600  (0B54AF) to a recognizable name...like Brad's Office when you use Airprint?

    You would have to change that in the printer's settings on the printer, if that option is offered by the manufacturer. The iPhone just finds printers on the network and uses the name they have given themselves or that were given to them when they were set up.

  • How to change the "name of column" property of an text item in runtime?

    How to change the "name of column" property of an text item in runtime?
    I look the properties of items in help and found nothing about this!
    It's possible?

    Hi,
    an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
    First create block and add items
    The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
    Set into items the column name property to col1 , col2 ...
    At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
    in this way you can change the source of column value.
    Caution because if you change value type from varchar2 to date you must cast date into varchar2.
    May be that this way is valid only for view data not for insert-update, i don't remember.
    bye
    Message was edited by:
    Killernero

  • How to change the worklist in schedule manager in production system

    we are using schedule manager (SCMA) to arrange the daily process in SAP system. but we have to config the worklist and transport it to the production system every time cause in production system if we press edit worklist there would be a message called " TK430 The system administrator has set your logon client to the 'not modifiable' status.Client-specific objects can not be changed in this client."
    Is there any way that I can directly change the worklist in production system?
    Thanks.
    Jiajia

    Hi SUN,
    Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
    and
    http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
    ps Stop the OMS first.
    Eric

  • How to change the $ sign in a class name?

    How to change the $ sign in a class name?
    After compilation I get classes with names like abc.class, abc$1.clsss abc$2.class etc.. How do I get different names (without the $ sign) that will be accepted by my web host.

    Thank you, I found out it had to do with the actionPerformed(ActionEvent e) assignment,
    public void actionPerformed(ActionEvent e) {
    if (e.getActionCommand().equals("Subtotal")) {
    bla bla �..
    I will have to rewrite some of my source code. I gave you points, thank you again.

  • How to change the output executable file name(a.prj:(output)--- b.exe)

    LabWindows / CVI： how to change the output executable file name
                For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
    I will try to save as a.prj b.prj, a.cws save as b.cws
    eg:a.prj  ---->(output)--->b.exe
    Solved!
    Go to Solution.

    You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
    See the complete description of available options here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to change the name of a BADI Implementation?

    Hello experts,
    Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
    Thanks in advance,
    AK

    Hi,
    Please go to transaction SE19, enter your implementation name.
    Then go to menu: Implementation -> Rename -> ...
    Regards,
    Ferry Lianto

  • How to change the language of administrator system message in outlook

    I wonder where is the option which changes the language of the text
    related
    to : Your mailbox is over its size limit send by the system
    administrator ?
    Some mailboxes get this message in French and other in
    English ?
    Is anyone can help me ?
    I work with French Outlook 2003 sp2 and
    English Exchange server 2000 sp3
    I try to change the regional setting on the
    server but nothing has changed.
    Thanks,

    Hi,
    Please refer to this duplicate thread below:
    http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • Error while creating index on  ep 6.0 9 sr1   (trex 6.1).

    Hell o all,     I am getting following error while creating index on  ep 6.0 9 sr1   (trex 6.1). Index could not be created; creating index failed: general configuration error (Errorcode 2030) can any on ehelp. thanks and regards Rajendra

  • Third Party Sales Orders

    Hi, I am new to SAP SD module. Can anyone clarify this. In the material master sales 2 view, "BANS" is entered in Item gategory field. "NORM" is entered in field Gen. item cat. grp. I want to know the following? 1) In the sales order the item categor

  • Song Not found

    I have had to delete and reload my entire song-list to iTunes about 7 times now. Randomly, about half of the songs on my iTunes always get that little exclamation point thing next to them and says the song could not be found, and I always have to re-

  • How to back up to unix-based NAS

    I have a very nice iomega ix2-200 NAS that advertised compatibility with Time Machine. In fact, this used to work. But at some point Apple apparently changed the AFP protocol and broke Time Machine compatibility in the last few versions of OS X. Is t

  • Select List Result into Where Clause

    I am trying to use a select list with redirect to choose an account and then have a report region update based upon the results of the selection. I've done this previously without any issues. I have since upgraded. In reviewing the code I am using no