How to change the Tab Strip name in T-Code CJ20N?

Dear All,
I have done one Screen Exit to add 5 additional fields in the T-Code CJ20N using Enhancement CNEX0007.
I got one extra tab "Cust. enhancement" in T-Code CJ20N.
Now my requirement is that the name of the Tab Strip "Cust. enhancement" should be changed into "User Tab2".
Can any one guide me how to do that?
Thanks & Regards,
Neeraj

hi niraj
how u add fields in cj20n
please dive me steps
of that.
Thanks in advance
chetan

Similar Messages

How to change the tabbing order of an array of clusters?

How to change the tabbing order of an array of clusters? I have the cluster arranged in table in the front panel. The cluster element goes horizontal and array element goes vertically. When I press the tab key, the cursor goes to the next array element instead of the next cluster item (down instead across).
Solved!
Go to Solution.

Broken Arrow wrote:
Harold asked a perfectly reasonable and necessary question, but how is that a Solution ???
I believe it is called the Socratic Method.
Sea-Story time
I had the privledge of working for Ron Davis when he managed the Allegheny District of DEC. He was an ex-WO4 (Highest possilbe rank for non-commisioned officer in US Navy, required act of congress to confirm).
Ron never answered any question I ever saw presented to him. I remember a group of managers in a frenzy over some issue running to him to to see what he thought. He asked them a series of questions that lead them to the solution and soon they were smiling and slapping each other on the back as they walked away.
Who is that has a signature that read "it is the questions that guide us"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to change the Dashboard's name?

hi all,
Any one can tell me how to change the Dashboard's name? Seems can only change the page name of Dashboard.
thanks.
Thanks all, i have finished the rename operaiton. but i don't know whether it will have any affects on the existing dashboard pages ?
帖子经 854623编辑过

Go to settings --> Administration --> Manage Presentation Catalog --> Go to your dashboard folder --> _portal --> Edit Name and Description

How to change the public display name?

How to change the public display name since the last person left the job and I am not new person take it.

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
MSDN and TechNet Profile and Recognition System forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to change the tab on a web browser

Hello,
I do not know how to change the (index.html) tab. When you have several of the tab on your browser open, the name appears in the middle of tab, mine continues to say the INDEX.html. I just need to know how to go into dreamweaver and change the title tag. In the actual HTML I have changed it and it still hasn't worked. please help, thanks!

Oh I see. You also posted another question about the page not working on mobile devices
http://forums.adobe.com/thread/1342179
The page name in the browser tab comes from the text inside the <title> tag.
Line 5: <title>INDEX.html</title>

How to change the RPD file name without deploying on EM

Is there a way to change the RPD file name so it doesn't have BI0002 or BI0003 on the end of it? I can delete my BI0002 file and point the NQSConfig.ini file to my new FileName.rpd but when the BI services restart the BI0002 file reappears in the repository directory and the NQSConfig file changes to reflect this. It's like the only way you can change this is in the Enterprise Manager, but that always adds the suffix to the file.
Any suggestions?
Here's what the docs say:
When you upload a repository, it is copied to the local repository directory for each Oracle BI Server component, located at:
ORACLE_INSTANCE\bifoundation\OracleBIServerComponent\coreapplication_obisn\repository
If you have published the repository in shared mode, then the repository is also copied to the shared network location.
After the repository is uploaded, it is given a version number suffix (for example, SampleApp_bi001.rpd). This version number is incremented each time that the repository is uploaded. To revert to a previous version, you must re-upload the specific version of the repository to use.
Note that you can delete older versions from the repository directory or shared network directory to reclaim disk space.
What does that mean? I have to use an old rpd file in order to get rid of the suffix?

Hi,
It can be changed, although I do not no exactly how. You have to take a look at the MBeans which are used to deploy a new repository. The suffixed is used to insure you do not overwrite an existing RPD
Cheers,
Daan Bakboord
http://obibb.wordpress.com

How to change the sender's name/email-id in the scheduled report

Hi,
We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out of the
team.
I tried to change but could not find the option to change while editing the properties in SCOM Console under Reporting -> Scheduled Reports.
When we are receiving mail from that scheduled report, instead of an individual name, would like to provide a generic name. Please help me out. Let me know, if you need more information.
Thanks,
Naren.
Thanks & regards, Naren.

Hello,
the SCOM scheduled reports feature rely on SQL Reporting Services. So, if you would like to change the SMTP configuration, you should go in SQL Reporting Services Configuration Manager:
Open in the Start Menu, Reporting Services Configuration Manager.
In the connection window, click OK.
Click on the tab E-mail settings.
Change the Sender Address.
Click Apply.
Alternatively, you could also change in the Scheduled report properties the field
Reply to. I think it should customize the reply address for each scheduled reports, but I have never used it. Anyway, doing it with Reporting Services Configuration Manager is more interesting in the long-run.

How to change the ipad's name in iTunes

When i connect ipad to PC, the iTunes gives it the name as " "My PC Account" 's ipad" automatically.
For the reason of facility management, I need to change the ipad's name which appear at iTunes.
How to fix it?

It doesn't work for me. In iTunes I renamed my iPad, then sync it with ipad. After disconnecting and then reconnecting the device, only old name appears in iTunes. It seems the change of name is volatile! Can anyone help? Thanks.

How to change the TestStand directroy name?

Hi,
I'm interested to change the TestStand directroy name to 'TestStand' instead of 'TestStand 3.0' or 'TestStand 3.1'.
I'm facing a problem with this name. Here is an explanation:
Right now we have TS3.0 and TS3.1 installed on several computers. We work on projects that share modules (like GPIB). These modules are in a ClearCase system, so each one of us can use them and modify them. These modules call to some TS files like 'tsutil.fp' (which is located on the C drive). As a result of different TS names, the project which formerly called a file in TestStand 3.0 directory is now looking for the same file in TestStand 3.1 directory which it doesn't find...
Can you advice me how to modify the TestStand directory name to 'TestStand'?.
Thanks
Rafi

In TestStand, if you go to the Configure>>Search Directories menu, you can add user defined paths to search directories. You have the option to add/remove/move up and move down the search directories. However these options are valid only for user defined search directories. The paths to directories that come shipped with TestStand cannot be removed or moved up/down. In your case, I would suggest that you create a custom path to the directory where you want to search and move it right to the top of the list using the "move up" button. In this way that particular directory will be searched first.
Thank you
Nandini Subramaniam
Applications Engineer
National Instruments

How to change the tab of a jTabbedPane when action performed

The scenario is like this : I have a jTabbedPane with 2 tabs. I want, when an action is performed in one tab (for example a button is clicked on tab1) to change the tab automatically (to make tab2 visible). How can i do this?
Thank you in advance

I've read JTabbedPane API before i post the message, but unfortunately i couldn't find a solution to my problem. I tried to use the methods grabFocus and requestFocus to change the focus of the application, but it didn't work.
Thank you for replying Nether.

How to change the tab order in adf forms.

Hi,
I design a from in adf jsff page.In the form i have 4 components. These components are surrounded with a panel form layout. Now if i put number of columns as 2 in the property inspector of the PFL.
Components appear as 2 fields in the first row and next two fields are in the second row.
Now my doubt is, when I tab out 1 field to another field. The tab out is Horizontal. But I want the tab out to be vertical. Please suggest how to make the tab out feature as vertical.
Thanking in advance,
Sudipta

I don't think we have something called tab index in adf like in javascript. This may not possible in adf.

How to change the TAB style of an application

Hi,
I have an application which was initially created using "One Level of Tabs". Now we require "Two Level of Tabs".
Is there some way of changing the Tab style of the application.
Thanks in advance,
Monika

Just forgot to mention that i want the already existing tab set to become the Parent tab set and then i should be able to create the standard tab set for each of the tabs in the parent tab set.
Thanks in advance
Monika

How to change the print queue name with Lexmark printer?

Is it at all possible to change the print queue name from Lexmark_3500_4500_Series, to something shorter? I try to link printouts from an old Sun Unix system, thru my iMac to the Lexmark X4580 multifunction printer. However, the Sun/Unix will not accept this long print queue name...

Apologies, I misread. The only way I know of changing the Print Queue Name is by readding the printer.
 > System Preferences > Print & Scan > Add
Choose your printer, make sure you change the print queue name to something different (equates to the Printer Name).
When you need to print, simply select the printer you just added.
Once your happy it works, delete the old printer from the list in Print & Scan.
Morgan

How to change the Tab name for a custom field added in IC Winclient

I have successfully added a field using eewb and it is appearing on my transaction in CIC0 but it is on a tab that says Customer Fields. In EEWB a BADI called ZEEW_CUSTOMER_H01 was generated and it has a methods called CRM_CUSTOMER_H_SET_TITLE. It indicates you should be able to use this to rename the tab but the method is empty. Anyone have an example of the code you pass in to rename the tab screen. Thanks, Lisa

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How to change the excel file name which is in Application server...

hi friends,
my requirement is getting failed, when i'm trying to change the file name which is in Application server using the FM: SXPG_COMMAND_EXECUTE.
when i execute above FM, i can see all my required details in SM69 like:
COMMAND NAME: ZSPOOL_TEST1
OS: Windows NT
TYPE: Customer
OS COMMAND: cmd rename Y:\OBRZ.PDF OBRZ38582.PDF
once the above FM is executed, i'm getting SY-SUBRC = 2 (exception: COMMAND_NOT_FOUND).
so, can any one guide me how to resolve this issue or is there any other way to rename the file which is in AS?
thanks in advance...

Hi ,
First you can tranfer the AS server file to a new application server file.
Then you delete the original file .
To do that you can write code as follows --
DATA : w_file(8) TYPE c VALUE 'FILE_NAM', " your present AS file name
       w_new(8) TYPE c VALUE 'NEW_FILE',
       fs_itab(255) TYPE c,
       t_itab LIKE TABLE OF fs_itab.
OPEN DATASET w_file FOR OUTPUT IN BINARY MODE.
DO.
READ DATASET w_file INTO fs_itab. " Reading value from the AS file to field string
IF sy-subrc NE 0.
    EXIT.
ELSE.
    APPEND fs_itab TO t_itab. " Populating internal table form the file value
ENDIF.
ENDDO.
OPEN DATASET w_new FOR INPUT IN BINARY MODE. " creating a new file if that does not exist
LOOP AT t_itab INTO fs_itab.
TRANSFER fs_itab TO w_new. " Transfering to file
ENDLOOP.
CLOSE DATASET w_file..
DELETE DATASET w_file. " Dleting the old file
CLOSE DATASET w_new. " Closing the final file
Regards
Pinaki

How to change the Tab Strip name in T-Code CJ20N?

Similar Messages

Maybe you are looking for