How to change the Table name during the Run Time

Hi
I have to generate a Oracle Developer/2000 report.
The input paramater is Vendor ( Ex:- Aetna,Cigna,BCBS...)
If the input paramater is Aetna then the table report should use is Aetna_Emp_Data or
If the input is Cigna then The table is Cigna_Emp_Data.
The Layout and fileds selected for the report remains the same.
Please let me know !
Regards
Kiran Ravuri
Workscape

Why don't you check with you co-worker Goran he has done this.

Similar Messages

How can one find the table name of the Delta Que and setup table?

Hi !
Is there any method to find the table name of the delta que and Extraction que ?

setup table = <extract structure>_setup
example: setup table for MC11VA0ITM = MC11VA0ITM_SETUP
Delta Queue is based on following 3 tables:
ARFCSDATA
ARFCSSTATE
TRFCQOUT
assign points if useful ***
Thanks,
Raj

Using column value is it possible to find the table name in the database?

Hi all,
using column value is it possible to find the table name in the database?
guys i need the table value
Note:
oracle-9i
for example:
i don't know NIC(column value) in which table in the database.
Thank you,
with regards,
JP.
Edited by: Guest on Feb 27, 2012 5:42 AM

Hi,
As far as I understand what you are asking for I would suggest 4 data dictionaries that will help you to know the table name from the column names
1. USER_TAB_COLS
2. ALL_TAB_COLS
3. DBA_TAB_COLS
4. COLS
These can give you detail information about the columns and respective tables at user, schema, dba level. Further information on the table can be found by querying ALL_OBJECTS table giving table_name as Object_name, or you can join the data dictionaries too.
To know about various data dictionaries avalible in Oracle please query select * from cat;
Let us know if you need further assistance.
Twinkle

Hw to find the table name of the perticular field is stored in db,usingFM

Dear all,
I need to find out the table name of the perticular field is storing in database using FM (note: using Function Module or any standard program , not manually like press F1 -> technicall setting etc.. .)
[ Exmple: Field: "MATNR" is stored in table : MARA, so i need the program/FM to findout MATNR is stoed in MARA table ]
i need this FM for update values of material master ( mm01 ) stored in different warehouse using module pool program.
it's very urgent , please send me reply asap.
thanks,
best regards
srinivas

hi Srinivas,
Please use the following logic:
types:
    begin of t_find,
       field(40),
    end of t_find.
data:
    lt_find type table of t_find,
    ls_find type          t_find,
    lt_found type table of RSFINDLST.
ls_find-field = 'MATNR'.
append ls_find to lt_find.
CALL FUNCTION 'RS_EU_CROSSREF'
EXPORTING
   i_find_obj_cls                    = 'DTEL'
   I_SCOPE_OBJ_CLS                    = 'TABL'
   NO_DIALOG                          = 'X'
TABLES
   I_FINDSTRINGS                      = lt_find
   O_FOUNDS                           = lt_found
EXCEPTIONS
   NOT_EXECUTED                       = 1
   NOT_FOUND                          = 2
   ILLEGAL_OBJECT                     = 3
   NO_CROSS_FOR_THIS_OBJECT           = 4
   BATCH                              = 5
   BATCHJOB_ERROR                     = 6
   WRONG_TYPE                         = 7
   OBJECT_NOT_EXIST                   = 8
   OTHERS                             = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The table lt_found has the details for the tables having MATNR as a field; field lt_found-object will have the table names.
Hope this helps,
Sajan Joseph.

I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!

I NEED THE TABLE NAME FOR THE FIELD DESCRIPTION GIVEN!
Partner Type
Partner Type Desc
Partner no
Partner Name
Partner Address 1
Partner Address 2
Partner Address 3
Partner Address 4

Hi Jyotirmoy ,
You can get all partners and their type in table EDPP1, depending of the partner type you need to go to specific table for address and other details, like for partner type KU(customer) goto KNA1,etc for partner type LI(vendor) goto LFA1 etc for partner type B(bank) goto BNKA etc ....
Sirish

How to get the Change Log Table name of the ODS from the system table

Hi,
I have a list of ODSs in the system and I am interested in finding the corresponding Change Log Table and the number of records in that table.
Can any one please tell me the name of the system table where this information is stored.
I dont want to get in this information manully (from the Contents tab of the ODS maintenane).
Regards,
Harikiran Gunnala

Hi
Go to SE16
Give the table name as "RSTSODS".
For User application field give CHANGELOG as input
and execute. You will get all the list of Changelog tables Along with below mentioned data
PSA
Version
To
Valid from
Object Status
Technical ODS name
Program Name
Maint Program
Object Name
Last changed by
UTC Time Stamp in Short Form
Partition number
Regards
Raj

How to get the table name in the trigger definition without hard coding.

CREATE TRIGGER db.mytablename
AFTER UPDATE,INSERT
AS
    INSERT INTO table1(col1)
    SELECT InsRec.col1
    FROM
    INSERTED Ins
   --Below i am calling one sp for which i have to pass the table name
   EXEC myspname 'tablename'
In the above trigger,presently i am hard coding the tablename
but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table name

I really liked your audit table concept. You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields. Wanted to share my end result.
USE [YourDB]
GO
/****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
ON [dbo].[YourTable]
AFTER INSERT,DELETE,UPDATE
AS
BEGIN
SET NOCOUNT ON;
Declare @v_AuditID bigint
IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
CREATE TABLE [dbo].[AutoAudit]
( [AuditID] bigint identity,
[AuditDate] DateTime,
[AuditUserName] varchar(128),
[TableName] varchar(128) NULL,
[OldContent] XML NULL,
[NewContent] XML NULL
ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
PK_AutoAudit PRIMARY KEY CLUSTERED
[AuditID]
) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
( [TableName] ASC,
[AuditDate] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
END
Select * Into #AuditDeleted from deleted
Select * Into #AuditInserted from inserted
While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
Begin
INSERT INTO [dbo].[AutoAudit]
( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
SELECT
GETDATE(),
SUSER_NAME(),
[TableName]=object_name([parent_obj]),
[OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
[NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
FROM sysobjects
WHERE
[xtype] = 'tr'
and [name] = OBJECT_NAME(@@PROCID)
Set @v_AuditID = SCOPE_IDENTITY()
Delete from AutoAudit
Where AuditID = @v_AuditID
AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
Delete top(1) from #AuditDeleted
Delete top(1) from #AuditInserted
End
END

Select data from all the table names in the view

Hi,
"I have some tables with names T_SRI_MMYYYY in my database.
I created a view ,Say "Summary_View" for all the table names
with "T_SRI_%".
Now i want to select data from all the tables in the view
Summary_View.
How can i do that ? Please throw some light on the same?
Thanks and Regards
Srinivas Chebolu

Srinivas,
There are a couple of things that I am unsure of here.
Firstly, does your view definition say something like ...
Select ...
From "T_SRI_%"
If so, it is not valid. Oracle won't allow this.
The second thing is that your naming convention for the
tables suggests to me that each table is the same except
that they store data for different time periods. This would be
a very bad design methodology. You should have a single
table with an extra column to state what period is referred to,
although you can partition it into segments for each period if
appropriate.
Apologies if i am misinterpreting your question, but perhaps
you could post your view definition and table definitions
here.

How to use a table name in the select statement using a variable?

Hi Everybody,
I got a internal table which has a field or a variable that gets me some tables names. Now I need to retrieve the data from all these tables in that field dynamically at runtime. So could you suggest me a way out to use the select query which uses this variable as a table ?
Regards,
Mallik.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

How to find out table name for the field in the webUI

Hi.
I am in CRM2007.
So i go to the transaction code BSP_WD_CMPWB
In that i provide the component name as CRM_UI_FRAME.
I press the Test button.
So, it opend the WebUI.
I want how to find out table of the particular input field?
I mean from which table the data is retrived how to find out?
When i enter some thing in the input field how to find out in which table that data is stored?
By pressing F2 on the input field it opend View and Component Name.
I want find out table of that particular field. How to find it?
If anybody know about this explain it with Screen shorts if possible.
Thank You.
Krishna. B.

hi
goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
Best regards
Pankaj kumar

How to change 'created by' name in the smartform

Hi,
I have copied one standard smartform into Z_smartform. My z_smartform is having 'created by' name as in standard smartform.
Could anyone please tell me how to change that name to my name.
Thank you,
Regards,
Kusuma.

Hi,
Now I understand. I tried to reproduce your problem by copying a standard smartform and the 'Create by' had my user ID. But now you say you uploaded the smartform from a file it becomes clear.
The uploaded smartform will retain the user ID from the original form, if you want to change this copy the form to a temporary name, then copy it back again to the original name.
Regards,
Nick

How to change your user name for the Ipod nano...

Can anyone please explain how to change the user name on your Ipod nano?

hiya!
do you mean the nano's name in the ipod source list?
if so, select the ipod in the itunes sourcelist. click on it once, and pause for a second or so. you should then be able to type in what you please.
love, b

How to display a table name in the report

Hi,
I have a requirment about the display of pivot table. When we drag a column to see its result, we always see his column name, now what I want to show are both table name and column name..
like:
District_D
Region District
China Beijing
India Chennai
Regards,
Anne
Edited by: anne on Oct 25, 2011 2:39 AM

Hi Anne,
If you want to implement Dpka's solution (hardcoding table and column values in column heading and add line break in between), you will need to add the below entry in instanceconfig.xml file. Refer http://gerardnico.com/wiki/dat/obiee/hardenxss
<HardenXSS>false</HardenXSS>
This will enable the HTML elements to be treated as HTML and not plain text. After adding the above entry in the xml, restart your presentation services and test your solution.
Thanks

How to change a field name in the client web interface

Hello,
I need to change name of the field in the Shopping cart Basic data (field Location). Where could I do this?
Thank you in advance,
Olga

Hi
<u>Which SRM Version are you using ?</u>
Incase you do not want the storage location fiels displayed in the item details then you can modify the template saplbbp_sc_ui_its_300.html to hide the field.
By creating screen variant in transcation SHD0 and implementing that screen variant in BBP_screenvariant BADI you can hide the fields.
Let me know the transaction and fields what you want to hide I can look at it.
<b>Related links -></b>
Hide field in SRM"Shopping Cart Status-> Finding shopping cart" html screen
Re: shide some search criteria in Shopping Cart Status
Note 974236 - Shopping Cart - Field control
Regards
- Atul

What is the table name having the data enterd in the "CJ40" TRANSACTION?

HAI GUYS,
               AFTER GETTING INTO THE CJ40 TRANSACTION, I HAVE CLICKED "PRIMARU COST". THIS SCREEN IN HAVING TABLE CONTROL , IN THIS TABLE CONTROL THERE WILL BE FIELD CALLED "TOTAL PLAN COST".
               IF I ENTER THE AMOUNT IN THE "TOTAL PLAN COST" FIELD, WHERE THE AMOUNT WILL BE STORED? I MEAN WHICH TABLE WILL HAVE THAT VALUE?
        I HAVE TRIED MANY THINGS . CAN ANYONE TELL ME THE NAME OF THE TABLE.
REPLY WILL BE AWARDED.
REGARDS,
SHAFI.

Hi,
The following are the tables used in Project Systems for this scenario;
IMAK     Appropriation requests - general data
IMAV     Appropriation request variant
IMPR     Investment Program Positions
IMPU     Texts for cap. inv. program positions
IMTP     Investment programs
IMZO     Assignment Table- CO Object - Capital Investment Prog.Pos.
PMCO     Cost structure of maintenance order
PRHI     Work Breakdown Structure, Edges (Hierarchy Pointer)
PROJ     Project definition
PRPS     WBS (Work Breakdown Structure) Element Master Data
You can refer those.
Regards,
Renjith Michael.

How to change the Table name during the Run Time

Similar Messages

Maybe you are looking for