How to change the text field typestyle in InDesign 6 forms
I am designing a form in Indesign CS6. I would like to change the typestyle in my text fields. It seems to default to Times Roman. I want to change it to Ariel. Any suggestions on how to do this. I do not want to have to do it in Acrobat.
You can't do that in InDesign, unfortunately, so you'll have to make changes in Acrobat after exporting to PDF. With scripting you have the opportunity to automate this. Post again if you'd like more info.
Also, I would strongly advise against using Arial and use the built-in Helvetica instead. Acrobat/Reader actually use a version of Arial when Helvetica is specified. If you specify Arial, it will embed the entire font, resulting in a sigificant and unnecessary increase in file size.
Similar Messages
-
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks, -
How to change the text of a field in organisational assignment.
hi gurus,
how to change the text of field MSTBR (super visor) to a differnt name in info type pa0001.
i have changed the field name in cmod , changed name appears in table.but it is not appearing in the info type screen 0001.
how to resolve this pls help me..hi,
The Field showing in the infotype 1 is FORPR.
Change the text of this Field in CMOD.
CMOD ->Go to ->tect Enhancements->keywords-> Change ->FORPR
Change the text and check again.
Regards,
Manoj. -
How to change the text of label dynamically
Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak. -
How to change the text of a button dynamically in module pool
hi gurus,
how to change the text of button dynamicallyHi ,
Declare a variable in TOP Include with your button name.
Example : P_BUTTON(20) TYPE C.
Place button with name P_BUTTON on you screen. Do not forget to mark it as "Output Field". [ Double click on button, Attributes --> Program tab --> tick "Output Field".
In you PBO / PAI , whereever you want to change your text -
Assign value to P_BUTTON.
Example -
iF COND1..
P_BUTTON = 'EDIT'.
ELSEIF COND2.
P_BUTTON = 'DISPLAY'.
ENDIF.
Regards,
Mohaiyuddin -
How do change the text color in the variable screen ?
Hi Experts ,
I would like to know about , How do change the text color in the variable screen ?
Using web templates (Analytical) can get the output. It has the variable screen contains 6 fields (Company code, Country , Region , COB, Plant and Purchasing Group). I want to make RED color text on Plant. Please help me .
Thank you ,
Prasad.Hi,
I am looking for nearly the same. What I have found is that it seems to manipulate the SAP theme that is used in standard when template is executed in the portal. Just display the source code of the HTML and there you will see the included SAP theme (normally SAP_TRADESHOW). Then you have to go to the SAP portal and change this stuff. But for that you have to know where to find it and what impact this change has.
I am not pretty sure if this is the right way. But as I want to change the standard layout of a whole template to a customer specific layout I think there is no other way in BI7.0.
Regards,
Peter -
HoW to ChaNGE the text in the mobile application to be in MulTi-CoLoR text
_* Do anyone can tell me how to change the text in the mobile application to be in multi-color text, to make it more interesting and increase readability?
Is it using the Graphic's paint() method? or any better suggestion?
Please give the short example if can?
Please help... "_"
Hearing from u all soon...@_@
thanks....Go into outline view. If you can see the outlines of the letterforms, you can't just change the text. If the letterforms are solid black, take the type tool, select the text and type yours.
Anyway you can just select the letters, take the type tool and type new text.
Working with the type tool is a basic. Please see the manual for details -
How to change the text of customer tab in Me23n
Hi
I have added new customer tab in Me23n at item level.
Its text is Customer Data.
I would like to change to some other text.
How to change the text of customer tab in Me23n
Regards
AmrutaAmruta,
I had the same query today and finally found the answer.
In order to change the title text or description of the "Customer Data" tab in ME23N, etc. you need to define a new text symbol in program SAPLXM06. The text symbol must be number 111 for the PO data. Make sure you define this text symbol in the language you are using when viewing the PO. I had issues with this as the original language of object SAPXM06 is not my logon language.
The standard code which picks up this text is in function module MEGUI_BUILD_PO_ITEM_PLUGIN. I could not find any documentation around this functionality.
Hope this helps!
Ben -
How to change the text of a RadioButton in JDeveloper 11.1.2.0.0
How to change the text of a RadioButton in JDeveloper 11.1.2.0.0
Select the radio button, open the property inspector (ctrl+shift+i) select the 'Visual' tab and search for the 'Text' property. There you can change the text.
Timo -
How to populate the TEXT field in MIGO
Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabiHello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli -
How to change the text under RECORD WORKING TIME IN ESS.
Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy -
How to change the text Transport id code in sus
Hi,
How to change the text Transport id code in sus while creating ASN
Please advise.
Regards,
manuSE80---> BSP APPLICATION with SRMSUS ---> views -->asn > detail_edit.inc.->
On the right hand side in the details ---> search for
BBP_SUS_UI/ASN_TRANSPORT_IDENTIFICATION
replace the above with the following
BBP_SUS_UI/INVOICE_DOCUMENT_NUMBER
BBP_SUS_UI/INVOICE.
there is no entry available for invoice number , only the above two are available.
save the changes
activate the changes
REWARD POINTS IF USEFULL -
How to change the screen field text in runtime
Hi ,
I want to change the screen button text in runtime IN ABAP dynpro screens. if anybody know this please post some helpful answer
Regards,
Anil kumar GHi Anil..
We can change the Text of a Pushbutton dynamically.
For this:
1. Declare a Global variable with the Same name as the Button in TOP include
Eg: Data: Button1(30).
2. In the PBO module of the Screen assign the Text to this variable:
Eg:
Module set_text OUTPUT.
Button1 = 'This is the text'.
ENDMODULE.
<b>REWARD IF HELPFUL.</b> -
How to change the text of a standard iview
Hello,
We are implementing ESS on ERP 2005 in an Irish client, and there is no Irish version of the webdynpro iview to change Personal data. So we follow the IMG docu and use the GB iview and works fine.
The problem is that the text on one of the fields comes as "Nat. Ins. No.", and that is an English expression. Here they use something called "PSS number". No need to say that Irish are not too kin on using English expressions.
So the question is: how can I change that text without having to create a new iview?
Please help.... Thanks,
AndresHi Andres,
If you want to change the text in webdynpro iview:
1. Open the package Explorer view and expand your src/packages
2. Copy the .xlf file (___.wdview.xlf) which contains the field "Nat. Ins. No." and rename it (add "_en" before ".xlf" or ISO standard for irish english)
3. Translate the renamed "_en.xlf" files.
Double click the xlf file and it is displayed in S2X editor.
On the tab header, change the source language to British-English. (There is only American English and British English options in the source language)
Switch to tab "Resource Text" and translate "Nat. INs. No. to PSS number.
Had it been any other language, it is bound to work for sure. However i find no Irish English in webdynpro source options...
Hope this helps
Sumathi -
How to change the text of a tabstrip?
Hallo Experts,
There are 3 tabstrips in Screen Painter with the name tabstrip1, tabstrip2 and tabstrip3. The default text ist: customer_fields1, customer fields2, customer fields3.
Now I want to change the text of tabstrips in real time. E.g. text of tabstrip1 should be "Financial Data".
How can I do it?
Thanks,
RujingWell, I've tried out some possible solutions, but none of the worked, I could not change the text dynamically during runtime.
You have some alternate solutions: create more tabs, and show hide them during runtime. For this you can use the dynpro's PBO event, and within the LOOP AT SCREEN... ENDLOOP. statements.
And an another one (that's absolutely not an elegant soluton
- create a DDIC structure (in SE11 transaction), with a field, like ZMYSTRUCTURE-ZMYFIELD. This field should refer to a data element, like ZMYDATAELEMENT. Here you can set a default text for this data element.
- assign this ZMYSTRUCTURE-ZMYFIELD field to the name of your tabstip's tab.
- when you wanted to change the text, you have to change the text, you update the text of your data element ZMYDATAELEMENT, in the table DD04T.
This might work... I'm not sure about it, but you might give it a shot.
Regards
Tamá
Maybe you are looking for
-
I want to authorizes all computers from my account
I want to authorizes all computers from my account
-
Plant issue during cross company sales orders creation
Hi experts, When creating sales orders, the system pops up "Maintain plant XX for the sales area Message no. V1762". I have gone through nearly all the relevant thread in the forum but failed to solve it. Moreover, the plant is just assigned to one
-
Is the sign-in username and password for firefox the same for mozilla
I am in the Firefox getting started tab. I tried to sign-in using the account log-in information for Mozilla. Are these two separate accounts?
-
Problem viewing videos in Safari
I used to use Chrome all the time but have read using Safari could increase my battery's life before its next charge. When using chrome and viewing videos in YouTube and Facebook I had no problems but since I started using Safari it has been saying I
-
if i have an Apple account with monay in it and i want to creat a new account can i transfer the money from the old account to the new account ?