How to change the update servers target location?

Hi i just bought a used MacBook from a friend i have been having a problem when trying to use the software update. when i click on software update it says it can not connect to the update server and that i should use network diagnostics. when i click on it it says network seems to be fine but on the left side it shows a red light where server is and says failed i click on run diagnostics and it says "network diagnostics was able to connect to the internet but not to the server "(not showing the server for privacy reasons)" This could be caused by problems with the server, or an internet problem between this computer and the server."
The server name which i did not list was my friends old job server. i just want to know how to change the update servers target location so it will stop trying to connect to his jobs server so it will allow me to update my software from my home wifi thanks

Your friend has configured this computer in some way to prevent a user from accessing Apple's update servers. This was probably done for security purposes. You might check if the firewall has been activated - Open the Security preferences, click on the Firewall tab. If the firewall is turned on, then turn it off. This should fix the problem.
However, if your friend has made other modifications, then you will need to ask him/her what you will need to do to remove them.

Similar Messages

  • How to change the line item storage location during the sales order creatio

    How to change the line item storage location during the sales order creatio

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • How to change the update rate of an Analog output in a loop

    I have to generate a ramp at a decreasing frequency. I use a shift register in a "for" loop to decrease the rate of the analog output. Unfortunately, the loop or the analog output initialisation take a too long time delay..
    How can I solve this problem?
    Any help is greatly appreciated
    Thank you

    Hello;
    I'm attaching an example VI that shows how to change the output rate on the fly.
    Hope this helps.
    Filipe
    Applications Engineer
    National Instruments
    Attachments:
    aochangeonthefly.zip ‏47 KB

  • How to change the order of target message? kindly help

    Hi Experts,
              I have a source message with fields EmpNo, EmpName, Dept and joining date. The target message has the same structure but fields are in different order. That is, EmpName, Dept, EmpNo and joiningdate.
    How to achive the target message with message mapping and without using a different message type for target?
    Kindly help
    Thanks
    Gopal

    Hi Gopal,
    Try this one.
    1. Create Only one message type of target type.
    2. Go to XSD tab and export the "XSD" of the message type.
    3. Change the <xsd:sequence> element to <xsd:all>
    4. Then import the "xsd" in external definitions.
    5. Use the imported "xsd" and create Message mapping. Give both source and target the same message type from XSD.
    6. just Map one to one.
    Now you can get ur required target structure. Since it is <xsd:all> it will accept ur input file.
    Regards,
    P.Venkat

  • How to change the redo log file location.... ?

    I want all my redo log files to be created in \u10 instead of current /u01?
    How to do it? NOARCHIVELOG mode database on Oracle 10g R2.
    Thank you,
    Smirh

    Hi..
    I want all my redo log files to be created in \u10 instead of current /u01?I think it should be /u10 :)...
    Anand
    Edited by: Anand... on Nov 5, 2009 5:32 AM Removed the misinformation about downtime

  • How to change the plant

    Hi experts,
    can any one please help me how to change the plant from one location to another location in purchase order.
    thanks in advance,
    mohammad

    hi
    goto me22n
    in that change the plant mentioned in purchase order.
    Regards,
    vijay

  • How to change the storage location in Lightroom 3.6.?

    How to change the storage location in Lightroom 3.6.?
    I use my internal hard drive NTFS of my MacBook Pro  as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
    My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
    I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
    I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
    Kind regards, Karin

    Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
    What if I name them f.i. like ...
    2013-09-11_Austria_1_mountain.jpeg
    2013-09-11_Austria_2_mountain.jpeg
    2013-09-11_Austria_3_valley.jpeg
    I would NOT do this. I would not change the file name.
    I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
    However, let's look at the big picture. I think there are three different methods of organizing
    Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
    Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
    Some combination of 1 and 2
    You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
    There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
    .. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
    It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
    There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
    If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
    Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
    So I have to create two folders - one with the originals and one with the edited exported photos?
    No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
    Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
    Wow, you really need to think about: Why are you using Lightroom?
    Could you explain this to me? Why are you using Lightroom?
    If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
    It is starting to sound to me like Lightroom is not the right software for you.
    Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
    You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

  • I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!

    I have iphone 4s with iO6. My problem is I can no longer update my apps since "cannot connect to itunes store" always shows on my screen when i try to. Tried fixing by changing the dates, turning off location as suggested in some forums but both didn't work!  Please help!! Thanks.

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • How do you change the default Save As location for PDF files?

    I have not been able to find a straight answer anywhere.  I am scanning documents to my email then I need to save them.  Instead of saving them to the last folder I saved a file in, (which would be logical) it saves them in a temporary files folder EVERY time.  I have seen answers about how to change the folder when saving documents from a web browser but that is not what I am doing.  Someone please help!  I have thousands of files to save and this is incredibly frustrating. Agh!!!

    Is it your scanning software that does that, or Adobe Reader?
    Anyway, I don't know how to change the default change destination for either of it.
    I have had a similar problem with an entirely different software, so what I did is create a shortcut to the destination folder in my Temp folder, so a simple double-click when saving gets met quickly to that target folder.

  • How do you change the Default 'Save As' location in Adobe Acrobat 9

    How do you change the Default 'Save As' location in Adobe Acrobat 9?

    You put a shortcut to the desired location in that location. You are then only 1 click away.

  • How to change the status of updated record?

    Hi All,
    how to change the status of updated record?
    new record should be active version(X) and old version will be deleted.
    Plz suggest..
    Thanks in advance...

    Steve,
    In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
    Now, you are talking about field. May I know which field are you talking about??
    Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
    Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
    Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
    If you stuck up again after many attempts, paste your code here. We will help you out
    Hope you got my concern.
    Thanks,
    Babu Kilari

  • How to change the location value after it is registered

    hello,
    I want to change the location (A) to a new schema. From what I am understanding, I need to unregister the old locatin(A) in repository browser, and then re-register it in control center, and change the schema name to my new target.
    Now, I have unregisted A in the repository browser. When I come back to control center, and click the register, everything is grey out which means I cannot change the value (but i need to change the value for service name and schema), except the password value. and on the top, it says 'this location has not been registered. please complete the location parameters'.But I know on the old version, like owb 9.0.5, the grey out means this location is registered. So I am really comfused now. The location is unregisted, why cant I change the value of this location?
    any suggestion will be appreciated.

    Here is what I was referring to - when in Control Center, I have the database locations. (sources, targets, OWF etc). Under a database location I selected the connector/location name under Connectors. When I select Deploy Action to Drop the connector/location name will remain. However, if you were to check in the database or the Repository Browser (Locations Report) you will see that the db link is gone. At this point you can safely modify the Locations info in the Connection Explorer (in Design Center). On the other hand, if you want the location to be deleted all together then now you can delete it in the Connection Explorer panel. If you did the prior drop step then at this point all db link info should be gone from the database.

  • I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
    Can I log into 2 email accounts on my ipad where it says mail at bottom?
    Can I have 2 apple ids?
    If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
    (won't let me)
    If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

  • How to change the ORACLE_HOME location in listener

    Hi,
    I have 2 instances under one oracle_home.
    I am planning to install new oracle home in another location and move one instance to that new oracle home.
    My doubt is, how to change the listner.ora such that one of the instances should point to new oracle home.
    1) Do I need to copy the listener.ora from old oracle home to new home and put only the new instance details in that?
    I am not understanding how to deal with listener.ora without disturbing the old instance listener.
    Thanks,
    Mahi

    if we bounce the listener the connections to other might be lost.NO!
    The listener contacts the DB to establish the initial connection between client & DB.
    After the connection between DB & client has started, the listener has NO involvement between DB & client.
    Stopping the listener has NO impact on existing sessions.
    Edited by: sb92075 on Jul 28, 2009 4:37 PM

  • HT4946 how to change the back up location on windows 7,c drive is almost full

    how to change the back up location on windows 7,c drive is almost full

    This is not a feature of iTunes.
    See this thread for way to "trick" iTunes into backing up to a different location:
    https://discussions.apple.com/message/20590667#20590667

Maybe you are looking for