HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

Hi All,
Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of 5. So can any body help me out from this how to change the Useful life in that Asset class. In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
Thanks in Advance,
Regards,
Siva.

Hi Ashok,
Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
Thanks in Advance.

Similar Messages

How to change the Schema (DB2, Oracle) in CommandTable at run time

Dear all,
I have a problem as below:
I have created report with CommandTable, then I am using Java and CRJ 12 to export data. So how to change the SCHEMA in CommandTable?
Please help me on this.
Ex: CommandTable is SELECT * from SCHEMA.TableA, SCHEMA.TableB
Thanks,
Nha

Dear Ted,
I want to change DataSource, it means the report will be load and change connection at run time (using CRJ SDK) and i want to change the SCHEMA.Tablename in CommandTable in report.
I also use the parameter to do it, but it can not be at run time, just correct when designing.
Could you please help me on this. You can post the code if any.
Thanks,
Nha

Change the useful life of an asset

Hi everyone,
I'm using Oracle 11i Asset module. currently I have an asset whose useful life is 4 years. But we realise that this asset can only last for 3.5 years (3 years and 6 months).
I tried to go into the Book of this asset and changed the life to 3.5 years. The system allows me to change the life year from 4 to 3 years but when want to change the life months from 0 to 6 months, the system doesn't allow.
Can anyone of you help me?
Thanks in advance

Please check the Depreciation method setup.
(Navigation: Setup-->Depreciation-->Methods)
There should be an entry for life in years=3 and life in months=6 for that depreciation method.
If it is not there, then system will not allow you to change the asset life.
You need to make an entry in the depreciation methods screen (Navigation: Setup-->Depreciation-->Methods) before trying to change the asset life.
Let me know if this helps.
Thanks,
Siva.

How to change the ownership of a doc after a specific time in workflow ?

Hi
My objective is to create a workflow in ESO , that will change the ownership of a contract document from the current person to his supervisor ( supervisor's id will be in user id management page) after a specific time .
Please help me how to do it ?
I am using TWE editor for workflow design
Regards
Swastik

To prepare a computer for sale or donation, in addition to the steps mentioned in this support article, take these steps:
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you paid for an upgrade OS X 10.7 or later, you must reinstall the original OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.)
The new owner will have to repurchase the software, if need be, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer them either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

How to change the application (MIDlet) input language at MIDlet run-time?

Hi,
I am working on a Messaging (SMS) J2ME MIDlet where it is required to change the input language for a TextField/Area at run-time.
For example if default handset language is set to Chinese, during MIDlet execution time the textfield language (locale) should be changed to Arabic/Spanish/French. Here I understand that provided the required languages are supported on handset, one can change them from handset settings.
Can anyone help me out with changing the microedition.locale to zh_CN from en_US?
Thanks

Dear Ted,
I want to change DataSource, it means the report will be load and change connection at run time (using CRJ SDK) and i want to change the SCHEMA.Tablename in CommandTable in report.
I also use the parameter to do it, but it can not be at run time, just correct when designing.
Could you please help me on this. You can post the code if any.
Thanks,
Nha

Change in Useful life of asset in mid year, but the previous posted depreciation should not be changed

Dear Experts,
I have a requirement in one of my client, We need to extend the useful life of asset in mid of an asset fiscal year and the depreciation which was posted in the previous should not be changed.
Requirement:
Useful life of asset is to be extended after completing depreciation for 4 years and in-between the current asset fiscal year. Provided the present asset value has to be taken as the new book value of the asset and the depreciation posted henceforth to be posted based on the new asset value till the remaining useful life.
Previously posted depreciation should be unchanged.
Analysis:
1.      The fiscal Year followed - October to September.
2.      The useful life of asset will be changed, and the depreciated value posted till 31/mar 2014 will have the old depreciation value ( based on the original acquisition value)
3.      The Depreciation key used in of type LINR (linear), depreciation value will be calculated based on the Book value till the asset value becomes ZERO at the end of useful life of the asset.
4.      We can change the useful life of the asset at the end of a Asset fiscal year say FY- 2014, if this is done the existing configuration will take the Book value of the asset at the end of the Fiscal as the asset value and the new depreciation will be calculated based on the new useful life of the asset. The asset value will become ZERO at the end of the newly changed Useful Life.
5.      But the requirement is that the useful life of the asset will be changed exactly half way in between existing Asset fiscal (i.e., 31/03/2014), if this is done system will change the depreciation value based on the new useful life ( since the Dep Key is LINR), but the depreciation value will change from the fiscal start say October 2013 to September 2014 ), which will not satisfy the requirement of the client. Since the depreciation which is already posted from October 2013 to March 2014 should not be changed.
Note:
1. We are not willing to retire the asset and create a new asset with the remaining book value as asset value and start depreciation.
Kindly let me know if the requirement can be fulfilled without retiring the asset.

Dear All,
This requirement has been completed.
1. I created New Multi level valuation method with base 26 ( Net book value w/o Revaluation ).
2. New depreciation key was created and the above method was assigned to it. I never changed the Base method.
3. new interval was created in the depreciation area, with this created dep key and extended the useful life of the asset. The depreciation was calculated according to the requirement.
Originally the asset had useful life of 5 Years, I changed the asset useful life to 8 years now with new Depreciation key 2001.
Depreciation was already posted to the asset till 04- 2013 for an amount of 148.27 SAR.
Net Book value carried forward to 2013 = 1575.56 SAR
Depreciation already posted till 4th period =   148.27 SAR
Current Net book value after useful life extension           = 1427.29 SAR .
Now the new depreciation key 2001 with Multilevel method 201, will take this Net-book value as Asset value and will depreciate along the useful life of the asset till it becomes zero.
Planned depreciation of 2013 ( remaining 6 months) = 166.24 SAR
Planned depreciation of 2014 = 225.96 SAR
Planned depreciation of 2015 = 225.96 SAR
Planned depreciation of 2016 = 225.96 SAR
Planned depreciation of 2017 = 225.96 SAR
Planned depreciation of 2018 = 225.96 SAR
Planned depreciation of 2019 = 131.25 SAR
Total      = 1427.29 SAR ( the Asset value becomes zero at the end of its remaining useful life.
The previously posted depreciation from 01.01.2013 to 30.04.2013 was untouched.

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

How to change the price of a material in PO

Hi,
Please tell me how to change the price of a material while raising a PO,for example i am raising a PO and in conditions the price is 100 and i wanna update it to 110.Please help me

HI,
If you are using condion record, you can change the value for the required condition type so that it will flow to PO. IF you are not using that, you can change the price at the line item level in PO itself.
Regards
Ram

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

How to change the browser used for Google search from context menu of selected text?

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email

I need to know how to change the identity (email address) used for the iTunes store as I no longer use that email.

Settings > iTunes & App store.
Tap AppleID, sign out then sign back in.
The Apple ID is right everywhere else. I've synced the phone. I've reset it in Settings on the phone. I've changed it at Apple.
When you write, "I've changed it at Apple, this means you updated yoru old AppleID or you ceated a new AppleID?

I can only see three weeks of emails on the imap email account on my iMac even though the same email address set up as a pop account on my iPhone, iPad and another iMac show all my emails. How do I change the setting to see more emails?

I have two iMacs, an iPhone, and an iPad. All use the same email address but the new iMac would only let me set up the email account as an imap account. On this iMac I can only see three weeks worth of emails. On the other iMac, iPhone, and iPad, this email address is set up as a pop account and I can see emails as far back as three years. I use Yosemite on the new iMac and I cannot find out how to change the settings to let me see more than three weeks worth of emails. This is an att&t email account which is basically a Yahoo account.

Nope. It will reset all settings. For fix errors.
Or you can try Logging out and Restart your iPad and Sign in again.

How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3

Hi All
I am trying to use OC4J 10.1.3.4 standalone with Spring 3.0 but I keep getting the error
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'It worked fine when I was using Spring 2.5.6
I have tried to change the parser as described here (http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-swapxmlparser/doc/readme.html). This is not quite ideal as I want to change the parser for the whole server and not just one application and besides, If I cant start the server, I will not be able to change the parser for an application anyway. I say this because the default xml parser (xmlparserV2.jar) throws an exeception if you try to use it with Spring 3.0 i.e.
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'I have had a look on them Oracle Forums(How can I use a 3rd party XML parser such as xerces with OC4J ? and Spring forums and appararently you have to change the XML parser (because the oracle xml parser is buggy!!) by puting the Xerces parser(or any other parser for that matter) on the classpath and then using the following switch
java -Djavax.xml.parsers.SAXParserFactory=org.apache.xerces.jaxp.SAXParserFactoryImpl -Xbootclasspath/a:C:\Miscellaneous\xercesImpl.jar -jar oc4j.jarHowever, when I try and start OC4J, I get the following error and I have no idea how to solve this. I have been at this for a couple of weeks but I still not getting any joy.
[Fatal Error] :-1:-1: Premature end of file.
2010-01-07 10:29:06.881 ERROR J2EE JCA-01006 Error initializing an ApplicationConnectionManager - ConnectorArchive and Application cannot be null
2010-01-07 10:29:06.881 ERROR J2EE JCA-01004 {0}
2010-01-07 10:29:06.881 WARNING J2EE JCA-01013 Error (Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException) while setting up RA for MCF (oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl) for standalone resource adapter 'Oracle JDBC Resource Adapter'
2010-01-07 10:29:06.881 ERROR J2EE OJR-00105 Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
     at com.evermind.server.ApplicationStateRunning.addConnectionFactory(ApplicationStateRunning.java:1623)
     at com.evermind.server.ApplicationStateRunning.initManagedDataSource(ApplicationStateRunning.java:1573)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2042)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1287)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:362)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:220)
     at com.evermind.server.Application.setConfig(Application.java:454)
     at com.evermind.server.Application.setConfig(Application.java:355)
     at com.evermind.server.ApplicationServer.initializeDefaultApplication(ApplicationServer.java:1603)
     at com.evermind.server.ApplicationServer.initializeAutoDeployedApplications(ApplicationServer.java:1586)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1018)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.InstantiationException: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
     at com.evermind.server.connector.ApplicationConnectionManager.initOutbound(ApplicationConnectionManager.java:909)
     at com.evermind.server.connector.ApplicationConnectionManager.init(ApplicationConnectionManager.java:314)
     at com.evermind.server.connector.deployment.ConnectorArchive.createConnectionManager(ConnectorArchive.java:1178)
     at com.evermind.server.connector.deployment.ConnectorArchive.addConnectionFactory(ConnectorArchive.java:662)
     at com.evermind.server.ApplicationStateRunning.addConnectionFactory(ApplicationStateRunning.java:1616)
     ... 12 more
10/01/07 10:29:06 WARNING: Application.setConfig Application: default is in failed state as initialization failed.
java.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 Error initializing server: Application: default is in failed state as initialization failed
10/01/07 10:29:07 Fatal error: server exitingCan anyone help or show me how to change the xml parser please ?
Thanks in advance!!

Hi All,
I have found a way to change the xml parser for my application and NOT the xml parser for the server. I followed the instructions here http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-swapxmlparser/doc/readme.html. In the end, I had to settle for changing the xml parser of my application(i.e. It uses its a custom parser e.g. xerces not the default OC4J parser i.e. xmlparserV2) and not the xml parser for OC4J because it was near impossible to change the xml parser for OC4J and besides, as the OC4J default parser(xmlparserV2) works well with the server and not my application, it made more sense to change the parser for my application (changed to Xerces) and not OC4J. Hope this helps someone else who may come across a similar problem.

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

Similar Messages

Maybe you are looking for