How to Change the Volume Changing Sound

How can I change the volume changing sound? I don't want to turn the sound off but I dislike the sound it makes when the volume changes currently.

Eireannsg1 wrote:
Yea, that reason sounds silly.
There are always 1001 reasons why it isnt being done because someone just doesnt WANT to do it.
It only sounds silly to you because you don't really understand the reasoning - obviously. Back in the days of CEP, this software did have a direct link to whatever mixer was being used - almost invariably the internal Windows one. And it was removed. A lot of sound devices simply don't provide links into their mixer panels any more - you run them standalone. On top of that, sound devices these days don't always use the same driver system, and also a lot of devices access Audition by external linking software, like ASIO4ALL. All of these things combined make it not as simple as you seem to think to implement something like this.
So it's not a case of no-one wanting to do it - it was actively removed, because strictly speaking it's not something that Audition should be legitimately addressing. Audition is an editor, and multitrack system, not a machinery controller. That's why its internal mixer is a purely virtual device, and has no direct influence on any of the hardware, except to determine the available inputs or outputs that it addresses.
So typically with the devices I use, if I want to control the physical attributes of them I leave their control panels open, almost invariably on a second monitor. And that is entirely sufficient.

Similar Messages

  • So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

    So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
    I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
    I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
    Please help!

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

    How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

    Every time I move the volume, it moves back!
    Check, if you have a volume automation set on the software instrument track.
    If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
    Click the automation curves disclosure triangle in the track header and disable the volume automation.

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hi, did you upgrade the OS lately?
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php

  • How do I change the "new messages" sound? (Thunderbird 31.3.0 on MacBookPro running OSX 10.9.5)

    I followed the instructions at
    https://support.mozilla.org/en-US/kb/how-customize-new-mail-sound
    to change the "new messages" sound. It does play when I click on "Play" in the Preferences pane.
    However, when new mail comes in, it plays the default sound. So why is it ignoring the Preference?

    I was wrong. It's playing both the default sound AND the sound I selected. How do I get the default sound to stop?

  • HT1655 I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory

    I have a 3rd generation shuffle.  It has stopped working with the earphones it came w/pinch buttons on the cord.  It will no longer advance to next song/change the volume.  Even with a new set of Apple earbuds, it does same thing.  How do i factory reset or fix the problem?

    Hello there, RufusChloe.
    The following iPod Troubleshooting Assistant should help with troubleshooting your issue:
    Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/shuffle3gen/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I change the way things sound like the bas, troule

    How do I change the way things sound like the bass, trouble,etc

    What is your operating system?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Volume control: I cannot change the volume using the keyboard of my Macbook. I have to go into preference. How to come back to the keyboard controler.

    I cannot change the volume using the keyboard of my Macbook. I have to go into preference. How to come back to the keyboard controler.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • HOW do I change the VOLUME of "You've Got Mail?" too loud!!!!!

    '''''# * '''bold text''''''''

    Hi Looking4YourHelp,
    You change the volume by pulling up Control Center and moving the slider bar for volume that is right under the player controls. Take a look at the link below for more information. 
    Use Control Center on your iPhone, iPad, and iPod touch
    https://support.apple.com/en-us/HT202769
    Take it easy,
    -Norm G. 

  • The icon that appears when you change the volume is stuck on my phone.  how do i get it off my screen

    the icon that appears when you change the volume is stuck on my screen.  Can anyone help?

    Hi antdagreat601,
    Welcome to Apple Support Communities.
    If you haven't already, I'd first try restarting or resetting your iPhone:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your device
    Note: Reset your device only if you are unable to restart it.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If the volume icon doesn't go away, see our iPhone Troubleshooting Assistant for more help:
    http://www.apple.com/support/iphone/troubleshooting/
    Have a great day,
    Jeremy

  • How can I change the default iPad2 sounds

    Is it possible to change the default event sounds that are on my iPad2?   I would like to use my own sounds either created or downloaded.
    Any help is appreciated.
    Curt

    I don'th believe that it's possible - I think your only choices are whether or not to have the system sounds enabled.

  • I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

    Hi
    rmarlia wrote:
    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
    Armadillosound wrote:
    To create a fade out press T to open the tool menu and select the fade tool.
    Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
    Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
    https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
    CCT

  • Can you change the volume display at bottom of screen to the song time instead?

    I have just bought a new Ipod Nano and really like it!  The only problem I'm having is when playing songs the bottom of the screen shows the volume level rather than how far it is through the song in time (like the old nanos used to show).  I find it really annoying not knowing at a quick glance how much more of a song is left to play.
    I know this info is displayed by double tapping the screen (although it is only shown temporarily).  Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    Thanks in advance.

    Is there a way of changing the volume level icon at the bottom of the screen to display the song time instead?
    There is not.  You can let Apple know how you feel about it using the form on this page.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • The icon when i change the volume up or down is no longer the beats logo, it is a simple megaphone.

    1. HP Pavilion m6 Notebook PC
    2. Windows 7 64 bit
    3. none
    4. I accidentally deleted IDT Audio, i was trying to get rid of programs that i didnt need, i didnt know this controlled beats.
    i noticed that my Beats Audio Control Panel was gone and i searched online and found out i needed to re-download IDT, so i did. Beats Audio Control Panel is now back but when i change the volume up, down, or off, it shows an ugly little megaphone icon and ugly little white bars, instead of the shiny silver beats logo and the silver bars.  I hate the new logo with the mega phone how can i get the beats logo back?
    i tried a system restore from before i uninstalled IDT but it still has the same problem.
    Please reply with any ideas

    Hi,
    Try reinstalling the HP OSD Utility on the following link.
    http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
    After this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Passing data through TCP/IP

    Hello ! My challenge is this: I have a vi that i have to use as a server and a vi as a client. In the server vi, i want to modify multiple parameters of one graph and these modifications should reflect on the client vi. How can i transmit, through TC

  • Changing Name of Account with Bonjour

    Hello all. I've completed an extensive search of the forums but can't find a solution as yet. My iChat application has me logged into my workplace's Bonjour network under an old name. I'm trying to change the name from Mackintosh Lou to something els

  • My screen is turning black as the line moves across my song

    As my song is playing in Logic Express the part that has already played turns black.  I can't edit my song as it is playing and have to pause then move the cursor, click somewhere else and then go back to be able to edit.  Anybody know why this is ha

  • Mac crashed with final cut on it. How can I reinstall?

    My old mac crashed recently. It had final cut pro studio on it and I lost it. My mac is unsalvagable. Is it possible to reinstall?

  • Stylus pen with iPod Touch or iPads

    Can I use a stylus pen with the iPod Touch or iPads? If yes, can you recommend one? Thank you, June