How to change the width of the form

hi all,
sometimes i want to change the width of a form ,then dispaly some text_item in it, how to ?
thanks
best regards!

By the way what you would like to know you on forms you can post it here? About my mail id :- [email protected]
Regards
SUN

Similar Messages

How to change the width of the EditForm.aspx and NewForm.aspx for both new and edited list entries?

How to change the form widths for the EditForm.aspx and NewForm.aspx files that display both new and edited list entries?

Hi ,
According to your description, my understanding is that you want to modify the width of the New Form and Edit Form of a list in SharePoint 2010 .
1.Go to your SharePoint site -> your list.
2.In top ribbon click List tab(List Tools).
3.Towards right you will see option as Form Web Parts, click on it, the three forms will be listed there [New Form, Display Form, Edit Form].
4.Select the one on which you want to increase the width/height.
5.It will open in edit mode, click on Add a Web Part.
6. Click on Forms [Categories] => HTML Form Web Part.
7.After adding the HTML Form Web Part, click on Edit WebPart.
8.Click on Source Editor, Remove all code from it and put an empty HTML table with width and height as per your requirement ex. to increase width
<TABLE WIDTH="800px">
<TR><TD></TD></TR>
</TABLE>
9.Save the form and check out your respective modal by clicking on the same in your list view.
Reference:
http://sharepoint.stackexchange.com/questions/40580/how-to-modify-width-of-standard-dialog-form-sharepoint-2010
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to change the width of the whole portlet layout?

Dear all,
As we know, now the width of portlet layout has set to 100%. But there is a new requirment from my customer that the width of the whole portlet layout view must be set to 750px.
So I tried to edit the css file and I found a block:
#pt-portal-content-view
     margin-top: 0px;
     width: 100%;
I tried to change the width to 750px, but nothing happened.
I want to know the way to change the width, thank you all!
Regards,
finall
OK,I have found the place to do it:
.portalContent          {
     display: block;
     width: 750px;
I set to 750px,then it works.:-)
But another question, how to make the content align to the center? I tried a stupid method, add margin-left:
.portalContent          {
     display: block;
     width: 750px;
     margin-left: 120px;
In 1024 X 768, it's ok, but it don't work well in 800 X 600.
When I set the all content width to 750px, I tried the three columns view, the portlet still run over the border.If there is any way to control this? thank u in advance!
Regards,
finall
Edited by finall1980 at 02/01/2007 10:09 PM

Try this:
.portalContent {
display: block;
width: 750px;
margin: auto; /* for properly-implemented browsers */
text-align: center; /* for IE 6 */
As for running over the 750px, there's nothing you can do about that other than actually narrowing the columns AND making sure that your portlet authors don't produce content that's too wide.
Chris Bucchere | bdg | [email protected] | http://www.thebdgway.com

How do I change the width of the x-scrollbar for a waveform graph?

I have a LV7.1 application that contains a waveform graph and must be usable on several PC with widely varying screen resolutions. I have decided to position and scale the front panel objects programatically, including the graph itself. The appearance of the graph is satisfactory on all screens, except for the x-scrollbar. The width of the x-scrollbar does not change when I change the size of the graph. I cannot figure out how to change the width of the scrollbar programatically to match the adjusted size of the graph. Any suggestions?
Regards,
Chris

Chris,
I don't think that you can change the width of the x axis scroll bar programatically. One thing you could do though is create your own scrollbar and change it's properties as your program runs. I wrote a quick example of how you could do this and I've attached it to this thread.
I hope this helps,
Justin D.
Applications Engineer
National Instruments
Attachments:
ChangeXScrollbar.vi ‏116 KB

How to change the width of the variable screen?

Hi
like in the subject mentioned i need to know how i can change the width of the variable screen....
right now i have to scroll if i want to see the right part auf the variable screen...
maybe i can change the width with css?

Hi,
Using CSS specify the table width for the variable screen and include the Css in the header section of the table.

How to change the width of the bar of bar charts?

Hi,
I am using Crystal Reports 11.
I created some stacked bar charts. Now, I want to change the width of the bar. Some one told me that I can't do that because it's totally controlled internally by Crystal Reports.
Really?
If could, how could I do?
Thank you in advance.

Hi,
The only way you can set the width of the bar is by going to Chart Options (Right-click Chart in Preview Mode > Chart Options > Appearance tab > Decrease the Gap Width).
Hope this helps!
-Abhilash

How to change the width of the scrollbar

how to change the width of the scrollbar,
I wanted to have a large scrollbar in all controls (for a touch screen app lets say) then is that possible?
Either through CSS, code,
skins anything really... Any ideas?
Thanks in advance.

Hi,
horizonatal(vertical)ScrollBar.width - in AS/MXML code
horizontal(vertical)ScrollBarStyleName - for style. But I'm not sure that width getted from css.

How to change the width of the auto complete drop down list?

Hi,
I implemented an autocomplete mechanism, using ICompletionSession and ICompletionSourceProvider. I have an issue with the size of the drop-down list opened when I use this autocomplete mechanism. The width of the autocomplete list remains the same, even
if the strings displayed change. This is apparent especially when I hit "backspace" on the already typed string, while the drop down list is opened: the deletion of the last character allows for more completion strings to be used, but since the drop
down width does not change, the longer strings appear cut.
Is there a way to force the drop down list to recalculate its width?
Yoel

I don't think there's any way, even VS itself can't do that you know, and the interfaces don't have such kind of events or properties.

How to change the width of the field?

Hi all,
I would like to decrease the width of a field on my report.
But I can't do it in the Property palette. I am not able to change the width property. The width of the database column is varchar2(255). I do not want to decrease the length of the database column, but only the width property of the field.
Any ideas?
Regards
Leonid Pavlov

You can't change that from where you are trying because that info is coming from the database. To resize the field just open the layout editor and size the field to the size you want.
Thanks,
Tom

How can i fix the tab overlapping when i change the width of the url bar with #urlbar-container [focused]?

I want to create for myself the most minimalistic browser experience as possible and i've put the most used features in the title bar. For purposes of space i had to fix the width of the url bar to a minimum and my intention is to increase it to a fixed width only when #urlbar-container [focused]. The problem is that #urlbar-container will overlap the existing tabs instead of shrinking their space, making it look really bad. It looks wonderful with #urlbar-container:hover, but i can't use that since whenever i want to refresh the wesbite using the button the width of the container will increase moving the button from the place i had the mouse in the first place to click it.
Fixed width of the url bar when #urlbar-container is not focused:
http://imagizer.imageshack.us/v2/800x600q90/829/xo4o.png
Fixed width of the url bar when #urlbar-container [focused]:
http://imagizer.imageshack.us/v2/800x600q90/34/8o36.png
This is the css i have for the url bar at the moment:
<pre><nowiki>#urlbar-container {max-width:225px!important;}
#urlbar-container {min-width:225px!important;}
#urlbar-container {transition:0.7s!important;}
#urlbar-container [focused] {max-width:500px!important;}
#urlbar-container [focused] {min-width:500px!important;}
#urlbar-container {transition:0.7s!important;}
#urlbar {border-top-right-radius:10px!important}
#urlbar {border-bottom-right-radius:10px!important}</nowiki></pre>

What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
The Tab bar should be displayed above the Navigation Toolbar.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to increas the width of the Table in OBIEE Report

Hi ,
I am creating a OBIEE report, the report has table and 30 column in it. When I am viewing the report in an excel file , its appearing good but the width of the table is so small if I am viewing the same in internet explorer/PDF .I dont know how to increase the width of the table. Could you please sort this issue out.
Thanks
Govindan P

- you can increase the width of a column -> column format values -> Additional Formatting Options
increase the width:
- Report level:
result tab -> Click on Format container of Table -> Additional Formatting Options
u can assign value width : 500 height:.....
- dashboard level:
Edit options -> section -> Format section -> Additional Formatting Options
here also u can change the width
u can assign value width : 500 height:.....
pls mark it helps....
Edited by: 979481 on Feb 6, 2013 1:25 AM

How to decrease the width of the border line of a table in smartform in 4.7

hi all,
i want to decrease the width of the border line of a table in smartform in 4.7 version. how can i do it? plz reply.

Hi,
When u r going to create a table in forms it will show the all details regarding the tables
like -> color
-> width etc...
From there u can do that .
u can also select the table format as all ready defined formats i.e available in he same screen.

Change column width in the run time

Hi, everyone:
I have a form with a master and a detail block. The detail block has a tabular layout. I want the user of the form being able to ajust the width of the particular column(s) in the run time by, e.g. dragging the border of the column(s) to the left or to the right. I've seen the examples of these forms, but want to know how easy would it be to implement that.
Thanks a lot.
Eugene.

Hi, everyone:
I have a form with a master and a detail block. The detail block has a tabular layout. I want the user of the form being able to ajust the width of the particular column(s) in the run time by, e.g. dragging the border of the column(s) to the left or to the right. I've seen the examples of these forms, but want to know how easy would it be to implement that.
Thanks a lot.
Eugene.

How to increase the width of the Crystal Report

Hello All
How to increase the width of the Crystal report template in the CR designer in .NET 2005 editor ?
I need to design a report which has to accomodate more number of columns.So achieve that i need to redesign the report having more width.
CrystalReports version 10.2.3600.0
Thanks in advance
Srivatsa

HI Srivatsa,
You can make a wider report by creating virtual pages. Virtual pages are the extra pages to the right of the main page that get created to accommodate cross-tabs that are wider than a single page. By inserting a cross-tab in a report then suppressing it, you can create a report that is multiple pages wide.
Insert and Suppress a Cross-Tab
1. On the 'Insert' menu, click 'Cross-Tab'.
2. In the Cross-Tab Expert, click any field and move it into the 'Columns' box, and click any field and move it into the 'Summarized Fields' box. Do not move any fields into the 'Rows' box.
3. Click the 'Customize Style' tab and select the following check boxes:
" Suppress Empty Rows
" Suppress Empty Columns
" Suppress Row Grand Totals
" Suppress Column Grand Totals
4. Click the 'OK' button and then insert the cross-tab into the Report Header section.
5. On the 'Report' menu, click 'Format Sections'. Click 'Report Header' and select the 'Underlay Following Sections' check box.
When you run the report you will not see the cross-tab, but you will be able to scroll to the right and see multiple virtual pages.
====================
NOTES:
" As there are no rows to the Cross-Tab, it does not carry on to Page 2 and the virtual pages do not appear past the first page.
" To increase or decrease the number of virtual pages do one of the following:
- Limit the number of records for the field in the 'Column' box of the 'Cross-Tab Expert' using the 'Select Expert'.
- Change the width of the 'Column' field in the Cross-Tab by moving the edges of the field.
====================
How to Insert Fields on Virtual Pages
You cannot drag-and-drop a field onto a virtual page, you can only do so on the main page. To get a field to appear on a virtual page:
1. Insert the field on the main page.
2. Click the 'Preview' tab.
3. Drag the right edge of the field to the right, onto the virtual page.
4. Drag the left edge of the field to the right, onto the virtual page.
Hope this helps!!
Regards,
Shweta

How can we configure the width of the table in SAP DB

Hello sirs,
How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
With best regards,
Sudheesh....

Hi,
The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
Can we change the column width?
The answer is 'NO'.
check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
The restriction cannot be broken.
Regards,
S.Divakar

How to change the width of the form

Similar Messages

Maybe you are looking for