How to change the workflow agent manually ?

Hi,
We encountered a situation where the workflow was received in error by a person. We are unable to determine the root cause of the problem as it was the first and last time we encountered this situation and we are unable to replicate the same error again.
I want to remove this workflow from that person's inbox manually and assign it to the intended recipient, how do I do this ? Could someone help me out with this situation, thanks.

Yes i agree with rick,
Dont think that WF log can be deactivated also if this is the case then how can you see workitem, may be the case that you dont have auth to view wf log (or if are using latest ECC versions then when u execute transaction SWi1 and open any workitem then type ctrl+p this will lead you to workfow log).
Try using SWI1, as workaroung you can use transaction SWIA to forward workitem to desired agent.
-Swapnil

Similar Messages

  • How to change the Workflow Business Objects

    Hi,
    How to change the Workflow Business Objects. I need to add custom code to the Method. can I create only custom method or I need to copy the existing object to Custom object .
    Thanks
    Niranjan

    Hi,
    Check the following link:
    http://www.sap-img.com/workflow/sap-workflow.htm
    http://www.sapmaterial.com/badi.html
    Regards,
    bhaskar

  • How to change designer workflow status manually?

    Hi All,
    I need to change designer workflow status manually. I tried to edit with datasheet view but couldn't. How to do this? thanks in advance!

    Hi Sam,
    According to your post, my understanding is that you wanted to change the workflow status manully in SharePoint Designer.
    There is no out of the box way to accomplish this with SharePoint, and we also can not achieve it with SharePoint Designer.
    We can use the Visual Studio to custom the status.
    In SharePoint object model the status of the workflow is modeled through the SPWorkflowStatus enumeration. Each status value is an integer that represents its place in a zero-based ordered list.
    The status values can be extended through the StatusColumn element in the ExtendedStatusColumnValues section of the Workflow.xml file.
    More information: http://blog.naikoo.com/?p=25
    http://sharepoint.ginni.me/2010/01/setting-workflow-status-to-custom.html
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to change the management agent to use new management service ?

    RDBMS Version:: 10.2.0.3
    Operating System and Version:: AIX 5L
    OEM Console Operating System and Version:: AIX 5L
    Configuring the Management Agent to Use a New Management Service
    Hi,
    I am trying to change the management agent to use new management service using following process.
    1. Stop management agent.
    2. Change in file Agent_home/sysman/config/emd.properties
    For values REPOSITORY_URL and emdWalletSrcUrl and emdWalletDest
    3. Delete all the files in the following directories:
    AGENT_HOME/sysman/emd/upload/
    AGENT_HOME/sysman/emd/state/
    4. Start the management agent.
    ./emctl status agent is showing the new URL for management server (OMS).
    But I am not able to locate the new host on the Web console at the OEM console where it is changed to.
    Can you suggest me workaround for the same?
    Thanks
    Dilipkumar Patel

    Hi,
    I am getting following error when trying to upload.
    tb152 /appl/oracle/oem/10.2.0/bin> ./emctl upload agent
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
    tb152 /appl/oracle/oem/10.2.0/bin>
    Regards
    Dilipkumar Patel.

  • How to change the workflow event

    Sir,
    I have a workflow against sales order which goes for release as per release strategy . It appears in their SAP inbox until he approves it goes to the second person . Now one sale order has gone to a specific person's inbox . I want to reverse that and to send to other persons SAP inbox because the person is not available . Can we do it . If possible how it can be done .
    Thanks in advance .

    Hi,
    You can have this functionality using substitute in SAP inbox, i.e SBWP. Got to SBWP-> Setting-> Workflow setting and here you can maintain substitute. You can mention dates during which this substitute is to be used. Person who will not be available should maintain this setting in thier SAP inbox.
    Hope this helps.
    Thanks & Regards
    Tejaswini Khante

  • How to change the recipients in workflow?

    I'm not  a workflow expert. Please help me how to change the recipients in workflow.
    The approver already resigned and we would like to change it to a new approver.
    We already deactivated the user and I stiil see him in SOST.
    In some releases, he is the approver and we would like to change it.
    Hope you can help me. Just kindly let me know if you still have queries.
    Thank you!

    Ask your workflow admin to define a substitution and/or forward the workitems.

  • How to change the sender name "workflow system" to Diff name

    Hi ,,
      How to change the mail sender name that is "workflow system" to different name. Whenever the mail is triggered it shows the sender name as "workflow system" . i want to change the name of the sender..Even i changed the name of the WF-Batch(name) user but no use.. Pls advice.
    regards,
    Roops.

    Hi Roops,
    Check if the following [link1|Re: How to change text of wf batch??] [link2|Update should not happen in the name of WF-BATCH] helps you.
    Regards,
    Saumya

  • How do I change the User Agent for Safari on my iPad?  I need this for a specific website for work.

    How do I change the user agent for Safari on my iPad?  I know how to do it on my desktop version, but I need it for my iPad.

    You can rename the iPad here:
    Settings - General - About - Name
    For Siri make sure he has himself as a contact in the Contacts app then:
    Settings - General - Siri - My Info and select his contact info

  • How to find the workflow for Change Request for the PO's

    Hi All,
    We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
    what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
    Your input will be highly appreciated.
    Thanks in advance
    Rgds,
    Sonia

    For 11.5.10.2 run this query to determine the keys to search on:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
    Then use the keys returned by the query to look up the Workflow in
    Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
    Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
    The query for change requests on a specific Requisition would be:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

  • How close is the workflow & GUI in PrE 10 to PrE 8?

    Actually, I'm not sure I'm asking in the right place - is "Discussion" the same as "Forum"? It's been awhile since I've posted in the forum and things have changed a lot. I seem to be going around in circles. (You know you're in trouble when you don't even know how to use the help forum :).
    My one question became two when I tried to use this forum.
    1) How close is the workflow & GUI in PrE 10 to PrE 8? Would a PrE8 manual be much use for PrE10? (Note: The last version I worked with is PrE 2 so I should know the basics. I just have to learn where everything is now).
    2) I'd like to read through all the questions in the forum, but all I can see are titles under "Trending Questions". Is that the way it is now? I'd like to expand the question list so I can read the first few sentences - is there a way to do that? I used to learn a lot reading through the forums, but titles alone aren't very helpful.

    Some links/reading to help
    Steve's Basic Training Tutorials http://forums.adobe.com/thread/537685
    -v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
    User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
    Right click PDF link in the upper right corner and select to save to your hard drive
    Also... BRAVO! for asking about how to learn the program before just jumping in !!!

  • How to Change the Default Font in Firefox 4 ?

    How to Change the Default Font in Firefox 4 , for this >>
    http://store2.up-00.com/Mar11/AJG18655.png << ?

    Go to properties first: and set before typing anything in as shown here:
    http://screencast.com/t/ZTgzOTM3Y
    Then right click bring up this menu while inside active field and click on item with arrrow:
    http://screencast.com/t/ZTRjMWRkMzk
    Now what ever you typed should reflect the new Font setting.
    we may be as you say. But then again other people act like whats on the other side.
    We do our best. And if we fall short, well we gave it our best shot.
    Okay. In the interests of being completely clear:
    I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
    A. Your advice is incorrect
    B. There is a problem with my installation of Acrobat
    I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

  • How to change the 'Default operating mode' of a mapping on the repository and not from the client

    Hi everybody,
    I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
    Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
    I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
    If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
    Thanks in advance
    Alessandro

    Urgent... help!!! Thanks
    in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
    Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

  • I have three email accounts and want to know how to change the display order.

    I have three email accounts and want to know how to change the display order.

    Install this add on.
    https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

  • How to allocate the workflow to the action defnitions in solution manager

    Hi,
    we are having solution manager with the CHARM configured, and currently we are looking for the trigger of mail and workitem for change of action. the work flow is designed for that, but how to assign the workflow to the condition and processing type .
    please suggest, points are definetly awarded.
    Thanks and regards
    keerthi

    Hi,
    Well, why dont you check the event that gets triggered during the Status change of the user?
    This can be done by switching on the EVENT TRACE using SWELS txn and simulate the BUSINESS PROCESS and then check the event trace using SWEL.
    After getting the required Business Object and event, Please attach your WF to that EVENT in the BASIC DATA-START EVENTS.
    Regards,
    <i><b>Raja Sekhar</b></i>

  • HoW to ChaNGE the text in the mobile application to be in MulTi-CoLoR text

    _*  Do anyone can tell me how to change the text in the mobile application to be in multi-color text, to make it more interesting and increase readability?
    Is it using the Graphic's paint() method? or any better suggestion?
    Please give the short example if can?
    Please help... "_"
    Hearing from u all soon...@_@
    thanks....

    Go into outline view. If you can see the outlines of the letterforms, you can't just change the text. If the letterforms are solid black, take the type tool, select the text and type yours.
    Anyway you can just select the letters, take the type tool and type new text.
    Working with the type tool is a basic. Please see the manual for details

Maybe you are looking for

  • How to create purchase reqisation using BAPI....?

    Hi Guru's, i have 100 purchase reqisation details in CSV file .. could you please any one of you ..which BAPI i have to use to create the purchase reqisation's.. please porvide any program logic realated to this that would be helpfull to me..if you h

  • Help in reading DBANALYZER output -

    Hi Experts I have gotten really good results so far - now I am bottlenecked at 2/3 of the test load level.  I expected to get 3000 connection run - but at 2200 I am hitting a jam.  It is a light weight OLTP test.  The param settings are below. Any su

  • IPad music app does not show track artists in compilations

    Hello community, i have a problem with my iPad's music app. When browsing compilations, it does not show the artist of each track like my iPhone does. Both devices are sync'ed with the same iTunes library, and the 'Part of a compilation' flag is set

  • Condition Types : Calculation Type Change from A (percentage) to B (fixed )

    Dear All, We created a condition type (Calculation Type : A (percentage) ) and assigned access sequence and maintained in pricing procedure but later decided to change the calculation type to B (Fixed Amount) on this condition type. I am wondering, w

  • Any one provide logical structure of the database

    Hi, Can any one tell me the logical structure of the database. Thanks,