How to change the worklist in schedule manager in production system

we are using schedule manager (SCMA) to arrange the daily process in SAP system. but we have to config the worklist and transport it to the production system every time cause in production system if we press edit worklist there would be a message called " TK430 The system administrator has set your logon client to the 'not modifiable' status.Client-specific objects can not be changed in this client."
Is there any way that I can directly change the worklist in production system?
Thanks.
Jiajia

Hi SUN,
Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
and
http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
ps Stop the OMS first.
Eric

Similar Messages

How to change the port in enterprises manager

Dear All,
I am using the oracle 11g in windows server.
I have changed the oracle port from 1521 to 1535 successfully. After change the post my em is not starting up. Now em is looking into the old port 1521.
Could you please guide me how to start the em?
Thanks,
SUN

Hi SUN,
Take a look at 11g Grid Control: Steps for Migrating the 11g Grid Control Repository from One Database to Another [ID 1302281.1]. Step 4.7
and
http://gavinsoorma.com/2010/10/11g-grid-control-how-to-change-the-oms-repository-database-listener-port-or-hostname/
ps Stop the OMS first.
Eric

How to change the hostname was set/defined in SAP system?

Dear Expert,
My customer met a problem about that:
he defined his host name with small characters(lower case) "abc" when he installed the SAP system (Windows2003(x64)-Solman70SR4).
But in SM21, the title of sm21, the hostname was recognize as upper case "ABC".
in SM51, the hostname was also recognized as upper case "ABC"
in STMS, the tab of 'transport tool', it is recognized as lower case "abc" in TRANSDIR.
in SM59, it is recognized as upper case "ABC" in internal connections, but recognized as lower case "abc" in ABAP connections, such as TMSADM@<DB>.DOMAIN.<sid>
While in Java URL, it is recognized as lower case "abc". With my test, the Java URL is not case sensitive for the HOSTNAME part in HTTP link as I tested to change the hostname both in upper case and lower case in etc\hostname file, the URL both are working. (not sure if this is due to the test is with intranet or not).
Based on SAP note 611361, it seems that:
"Hostnames must be considered "case sensitive". That means
hostnames shall be used in the same case (upper or lower) in all
SAP configurations as well as in the network configuration (DNS
or etc/hosts). You must ensure consistent name resolving of the
hostname from hostname to IP address and back from the IP address
to the the same hostname (case sensitive match). See also note
129997."
Please help to suggest.
Many thanks in advance,
Perry Song

Section 4.13 "Checking the Consistency of the Host Name" in [This Upgrade Guide|https://websmp208.sap-ag.de/~sapidb/011000358700000353422008E] has a good explaination of what & how to check your hostname / parameter configuration.
on a windows box, another way to get the TCP/IP name is to type 'hostname' from a CMD window.

Where / How to change the Em Alert schedule time for a target ?

Hi,
We have a cron tab say running on 30 20 * * 1-5 on our production. And in EM it was set to 30 20 * * 0-4 earlier, so we r getting alert on Sunday. So I want to change in EM also to 30 20 * * 1-5 so that we ll not get the EM alert on Sunday night. Where or how in EM to change this ?
Thanks in Advance.
Edited by: Kuldip on Jul 8, 2010 2:43 AM

I am afraid that using Blackouts is the only way to avoid OEM GC generating alerts.
Note that I am revering to the Alerts that will be shown in the OEM Console.
If you want to influence the moment a Notification will result in an E-mail, you might want to take a look at the Notification Schedule, that allows you to do a-mail notification based on date and time to different mailboxes.
Regards
Rob

How to change the package name of Managed Bean class

Hi: Gurus, when ever I create a new JSP page the Creator creates a code behind file with a package name untitled. Is there any way to change this package name? Can't the Creator gives us an option before genereating manged bean page to choose a package name? And then create the Java source directory structure on the basis of the pakcage name?
Regards,
Rashid.

In the Project Navigator (default location is middle right), go to Java Sources, and you can rename the package ("untitled") to something else by right-clicking it or by left-clicking (just like Windows Explorer).
I agree, though, that giving the developer an option during creation of the JSP page would be nice.

How to change the sender name "workflow system" to Diff name

Hi ,,
How to change the mail sender name that is "workflow system" to different name. Whenever the mail is triggered it shows the sender name as "workflow system" . i want to change the name of the sender..Even i changed the name of the WF-Batch(name) user but no use.. Pls advice.
regards,
Roops.

Hi Roops,
Check if the following [link1|Re: How to change text of wf batch??] [link2|Update should not happen in the name of WF-BATCH] helps you.
Regards,
Saumya

Has anybody found out how to change the workgroup name in 10.5?

I have been trying to connect to XP machine shared folders and it is not working.
I've tried using smb and it gives connection error or says Ithe user has not permission in the machine
I've started in 10.4 from backup disk and it is working OK.
I see that in 10.4 it asked for DOMAIN/ Workgroup name , and this option has disappeared in 10.5
Has anybody found out how to change the workgroup name in 10.5?

System Preferences - Networking

How to change the Schedule For settings for an object

Hi All,
do you know how to change with BO Enterprise SDK Java the schedule settings for an object?
I mean these settings that can be changed manually In the Objects management area of the CMC, selecting a report object, Schedule tab, Schedule For link:
- Schedule only for myself
- Schedule for specified users and user groups
Rest of settings can be managed with ISchedulingInfo, but I don´t know how to change the "Schedule for" property.
Should I use other SDK?
We have Webi Documents, BOXIE R2 SP2
thanks,
regards,

Hi,
I think I´ve solved it,
we can use
ISchedulingInfo.getMultiPassObjects()
that returns a java.util.Set of user/usergroup IDs on the schedule for multipass.
and then we can work with this Set (adding or removing users and groups).
Setting manually to "Schedule only for myself" in the CMC is the same that removing all the elements from the getMultiPassObjects() set.
thanks,

How to change the dictionary-managed taclespaces to locally managed

Hi,
how to change the dictionary-managed taclespaces to locally managed tablespaces in 9i?
Many thanks.

Hi
execute DBMS_SPACE_ADMIN.TABLESPACE_MIGRATE_TO_LOCAL ('TABLESPACE_NAME');

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to change the default BC image that shows in the address bar?

Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
Thank you!

Hi,
If you are trying to change the favicon for your site,
You can do it from Site Manager-> Page template -> Default Template
Look for the code <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
Please let me know if you have any doubt.

How to change the reconciliation account in customer master record?

hi friends,
i created customer master with wrong reconsiliation account in XD01. i failed when i am trying to change that reconsiliation account in XD02. it was suppressed. how to change the reconcilition account in customer master data?

Hi,
Go to this path: Spro>Financial Accounting>Account Receivable & Account Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Define Account Groups with Screen Layout (Customers)
Double Click on Your Group, Then Click on Company code Data under Field Status, Then Double click on Account Management, That screen you will find the Reconcilation Account, Select Requred Entry.
now it will coming Customer master.
It's useful assigne points as a way to say Thanks
Regards
gvr

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

I recently changed my apple ID but my previous apple ID is associated with my icloud account. I'm setting up my new iphone 6 and cannot complete the set up until I can sync my icloud account. Does anyone know how to change the icloud id?

Do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iPhone and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your phone).

How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3

Hi All
I am trying to use OC4J 10.1.3.4 standalone with Spring 3.0 but I keep getting the error
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'It worked fine when I was using Spring 2.5.6
I have tried to change the parser as described here (http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-swapxmlparser/doc/readme.html). This is not quite ideal as I want to change the parser for the whole server and not just one application and besides, If I cant start the server, I will not be able to change the parser for an application anyway. I say this because the default xml parser (xmlparserV2.jar) throws an exeception if you try to use it with Spring 3.0 i.e.
nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'I have had a look on them Oracle Forums(How can I use a 3rd party XML parser such as xerces with OC4J ? and Spring forums and appararently you have to change the XML parser (because the oracle xml parser is buggy!!) by puting the Xerces parser(or any other parser for that matter) on the classpath and then using the following switch
java -Djavax.xml.parsers.SAXParserFactory=org.apache.xerces.jaxp.SAXParserFactoryImpl -Xbootclasspath/a:C:\Miscellaneous\xercesImpl.jar -jar oc4j.jarHowever, when I try and start OC4J, I get the following error and I have no idea how to solve this. I have been at this for a couple of weeks but I still not getting any joy.
[Fatal Error] :-1:-1: Premature end of file.
2010-01-07 10:29:06.881 ERROR J2EE JCA-01006 Error initializing an ApplicationConnectionManager - ConnectorArchive and Application cannot be null
2010-01-07 10:29:06.881 ERROR J2EE JCA-01004 {0}
2010-01-07 10:29:06.881 WARNING J2EE JCA-01013 Error (Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException) while setting up RA for MCF (oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl) for standalone resource adapter 'Oracle JDBC Resource Adapter'
2010-01-07 10:29:06.881 ERROR J2EE OJR-00105 Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
     at com.evermind.server.ApplicationStateRunning.addConnectionFactory(ApplicationStateRunning.java:1623)
     at com.evermind.server.ApplicationStateRunning.initManagedDataSource(ApplicationStateRunning.java:1573)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2042)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1287)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:362)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:220)
     at com.evermind.server.Application.setConfig(Application.java:454)
     at com.evermind.server.Application.setConfig(Application.java:355)
     at com.evermind.server.ApplicationServer.initializeDefaultApplication(ApplicationServer.java:1603)
     at com.evermind.server.ApplicationServer.initializeAutoDeployedApplications(ApplicationServer.java:1586)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1018)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.InstantiationException: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
     at com.evermind.server.connector.ApplicationConnectionManager.initOutbound(ApplicationConnectionManager.java:909)
     at com.evermind.server.connector.ApplicationConnectionManager.init(ApplicationConnectionManager.java:314)
     at com.evermind.server.connector.deployment.ConnectorArchive.createConnectionManager(ConnectorArchive.java:1178)
     at com.evermind.server.connector.deployment.ConnectorArchive.addConnectionFactory(ConnectorArchive.java:662)
     at com.evermind.server.ApplicationStateRunning.addConnectionFactory(ApplicationStateRunning.java:1616)
     ... 12 more
10/01/07 10:29:06 WARNING: Application.setConfig Application: default is in failed state as initialization failed.
java.lang.InstantiationException: Error occurred initializing connectors. Exception is: Exception creating Managed DataSource ConnectorPropertySet. Exception: Error setting up resource adapter for standalone resource adapter 'Oracle JDBC Resource Adapter'. ManagedConnectionFactory implementation class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl' cannot be set up: Error setting JavaBean property 'managedDataSourceConfigXML' for ManagedConnectionFactory class 'oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl for standalone resource adapter 'Oracle JDBC Resource Adapter'. Exception is: java.lang.reflect.InvocationTargetException
10/01/07 10:29:06 Error initializing server: Application: default is in failed state as initialization failed
10/01/07 10:29:07 Fatal error: server exitingCan anyone help or show me how to change the xml parser please ?
Thanks in advance!!

Hi All,
I have found a way to change the xml parser for my application and NOT the xml parser for the server. I followed the instructions here http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-swapxmlparser/doc/readme.html. In the end, I had to settle for changing the xml parser of my application(i.e. It uses its a custom parser e.g. xerces not the default OC4J parser i.e. xmlparserV2) and not the xml parser for OC4J because it was near impossible to change the xml parser for OC4J and besides, as the OC4J default parser(xmlparserV2) works well with the server and not my application, it made more sense to change the parser for my application (changed to Xerces) and not OC4J. Hope this helps someone else who may come across a similar problem.

How to change the worklist in schedule manager in production system

Similar Messages

Maybe you are looking for